The o ring broke apart, so now the sprayer shoots water up. What size is the o ring in side the trinsic sprayer so I may replace?
Should be covered by warranty.
Date published: 2018-01-08
What is the size of the hose assmbly that attaches to this sprayer, and is there an adapter to 3/4" hose available?
I have this sprayer on my kitchen sink faucet (DPD-K-9159-DST.) I would like to be able to connect a bottle washer that uses a female 3/4" garden hose connector. There's no direct access on the sprayer itself for a thread adapter. Is there anything available to convert the hose assembly to 3/4" garden hose?
Thank you for your question. The hose has a thread size of .625-18. We do not make an adapter for the hose.
Date published: 2017-04-06
How do I disassemble sprayer after removing it from the hose?
I have cleaned all accessible areas and soaked the sprayer overnight in vinegar, but the flow is still very low. The spray function works well, but the regular flow function is weak. Something must be clogged within the sprayer part. Is there a way to disassemble it and clean it?
I have replaced this RP64069AR assembly three times in three years. I finally figured I had enough pieces to take it all apart and see what the problem with the push valve was. I can tell you that there are 4 small rubber O rings in this tiny push valve. When they get worn out over time from switching from spray to solid flow, the valve fails or sticks. It's rubber on plastic and it doesn't take much due to the valves tiny size. My advice, avoid switching from spray to solid flow too often. Keeping it in one position as much as possible will lengthen the life of this faucet head.
Date published: 2018-01-31