Spray Assembly - Pull-Down

Trask

Model#: RP64069SP
Delta Spray Assembly - Pull-Down is rated 3.0 out of 5 by 3.
  • y_2018, m_7, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_RP64069SP, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 11ms
  • REVIEWS, PRODUCT

Download Image


Compare Favorite Add To A Project View my Items image/svg+xml Print
Finish: Spotshield Stainless
List Price (US $):
$76.40

BASE PARTS
RP64069SP
$76.40

Technology

Special Features

Product Support, Repair Parts & Technical Specifications


Installation Information


  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Supply Lines: Not Included
Rated 5 out of 5 by from Excellent service and products. For the kitchen sink.
Date published: 2018-06-16
Rated 1 out of 5 by from warranty issues Own a Trinsic seri s Model 9159T-DST kitchen faucet. Supposed to be lifetime warranty but delta makes it such a hassle to get a warranty part it just isn’t worth my time. First electronics were an issue. Not leaking sprayer assembly that they say cost $52 +shipping when it should be covered by warranty.
Date published: 2018-01-07
Rated 3 out of 5 by from Overall this is a very nice faucet. Worked great for a few months then the begin to leak through the sprayer whenever it is turned on. Have to constantly push the button to stop the dripping. This is more of an annoyance than a complete malfunction.
Date published: 2017-10-09
  • y_2018, m_7, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_RP64069SP, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • REVIEWS, PRODUCT

What size is the diameter of the hose?

Asked by: Jack E
Hi, Jack E! Thank you for your question. The hose diameter is 11/32". The valve end connection is just over 1/2", and the threads on the wand end is approximately 5/8". Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-28

RP64069 How do I unscrew the Sprayer to clean out debris?

Asked by: trinsic debris
Delta should send you a complete new spray assembly under warranty
Answered by: Standover
Date published: 2018-01-31

O Ring

The o ring broke apart, so now the sprayer shoots water up. What size is the o ring in side the trinsic sprayer so I may replace? Thank you.
Asked by: Jenn
Should be covered by warranty.
Answered by: Standover
Date published: 2018-01-08

What is the size of the hose assmbly that attaches to this sprayer, and is there an adapter to 3/4" hose available?

I have this sprayer on my kitchen sink faucet (DPD-K-9159-DST.) I would like to be able to connect a bottle washer that uses a female 3/4" garden hose connector. There's no direct access on the sprayer itself for a thread adapter. Is there anything available to convert the hose assembly to 3/4" garden hose?
Asked by: CritZero
Hi CritZero, Thank you for your question. The hose has a thread size of .625-18. We do not make an adapter for the hose. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-04-06

How do I disassemble sprayer after removing it from the hose?

I have cleaned all accessible areas and soaked the sprayer overnight in vinegar, but the flow is still very low. The spray function works well, but the regular flow function is weak. Something must be clogged within the sprayer part. Is there a way to disassemble it and clean it?
Asked by: Pam
I have replaced this RP64069AR assembly three times in three years. I finally figured I had enough pieces to take it all apart and see what the problem with the push valve was. I can tell you that there are 4 small rubber O rings in this tiny push valve. When they get worn out over time from switching from spray to solid flow, the valve fails or sticks. It's rubber on plastic and it doesn't take much due to the valves tiny size. My advice, avoid switching from spray to solid flow too often. Keeping it in one position as much as possible will lengthen the life of this faucet head.
Answered by: BobbyT
Date published: 2018-05-18

the hose assembly is different than original how do i connect it

Asked by: janice
Hi Janice, Thank you for your question. The new hose should thread directly into the wand. There may be an adapter. To remove it, press the round tab and unscrew. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-01-22
  • y_2018, m_7, d_19, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_RP64069SP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 15ms
  • QUESTIONS, PRODUCT