How much clearance to backsplash is required? Images look like it will work with less than an inch.
Thank you for your question, Jack. We recommend having a 2 1/2" clearance from the center of the mounting hole to the backsplash. That will provide enough room for installation, use, and cleaning.
Date published: 2017-08-31
How do you measure the hole-to-hole 8"?
Right now the old faucet is still in place on my sink. 3 holes: if I measure from what appears to be the middle of the left hole, to the middle of the right hole, it's 8 inches. Is that rights? So this 10+" plate should cover all 3?
Hi Bill, Thank you for your question!
Your measurement is correct. You measure for center to center. So a 10" escutcheon plate should work.
Date published: 2016-04-26
can this part be used with Haywood™ Single Handle Centerset Lavatory
I have an sink with 8 inch holes but only want a single handle lavatory faucet.
Hi Bathreno, Thank you for your question!
The RP64070 escutcheon will not fit on the 15999-DST Haywood lavatory faucet.
Date published: 2016-04-08
The diagram for the Delta #4159-DST describes part #RP64070 as a 10.5 inch escutchen but elsewhere it is described as an 8 inch escutcheon. Which?
I am replacing a 10 inch centerset faucet and I need the escutcheon for this faucet to cover it. Will it work?
That actual dimensions of the plate are 10.5 inch. Hole to Hole is 8 inches. So yes, this is the one you need.
Date published: 2017-01-14
Will this work for a 4 hole drop in stainless steel sink?
will it work to cover at least 3 holes of a 4 hole drop in?
Thank you for your question. RP64070 will cover up 3 holes in a normal installation.
Date published: 2016-03-21
Is this the right part and what comes with it.
We purchased a faucet, model 9159-dst. We have three holes in the sink, and need the parts to adjust it to one hole. The instructions say we need 10 1/2" RP64070 Escutcheon, Mounting screws, gasket, nuts and washers. Is this the right part? And does it come with the other pieces, or are they separate? Thanks.
Thank you for your question. When you order Delta Faucet model # RP64070, it will include everything you need to mount your faucet using 3 holes instead of 1 hole.
Date published: 2014-11-27