Is this made as a different style.
I purchased a new Delta faucet, 19915-SBSD-DST. But have found that the center location hole of the Escuteon needs to be to the side not in the center. My sink has the faucet mounting holes not in the center of the sink basins. My sink style has a larger basin on one side an a standard sized basin on the other. So the mounting holes are next to the standard sized basin side. With the center mounting hole on your faucet, it puts the new faucet farther away from the larger basin. Do you make an optional Escutcheon with the faucet mounting to the side instead of the center. See attached image. Thanks.
Regards, Shane B. Sulser
Hi Shane, Thank you for your question. Unfortunately we do not offer an offset escutcheon for our faucets. The model 19915-SBSD-DST can be installed in the closest hole using the single hole escutcheon. You could then add other accessories to the open holes or cap them off.
Date published: 2015-04-27
spec sheet on rp64472ar
not shown on website. customer wants specs to see if fit on sink ledge.
Thank you for your question. Delta Faucet part # RP64472AR is 10.727 inches long and 2.60 inches wide.
Date published: 2017-02-27