Orleans™
Tub Spout - Pull-Up Diverter
Model#: RP43161SS
Tub Spout - Pull-Up Diverter
Orleans™
Tub Spout - Pull-Up Diverter
Model#: RP43161SS
Finish: Stainless
List Price*: $112.15
PRODUCT FEATURES
  • Pull up to divert
  • 6 1/2" total length
  • Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS
Special Features
California Prop 65 WARNING
SUPPORT
Installation Information
Over All Height :
2-23/32
Connection Type :
NA
REVIEWS
Rated 5 out of 5 by from replacement part we like delta products, this item was just a replacement.
Date published: 2014-03-22
  • y_2021, m_1, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_RP43161SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 8ms
  • reviews, product
Q&A

Hello, Is there a shower arm & flange, overflow plate, and shower handle kit (standard one, controls temp and flow with one handle) that all match the stainless color of this faucet?  Looking for model numbers on all of those.  

Asked by: Matt
Thank you for your question, Matt! We have several shower arms & flanges, overflow plates and valve trim kits that are available in the stainless steel finish. Because there are several different models that would match, I would recommend looking through showering products on our website. I have included a link below, for your own reference. If you need further assistance, feel free to contact us directly. https://www.deltafaucet.com/bathroom/showering Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2019-09-26

Will this spout fit our threaded pipe that extends 4" from the wall?

Asked by: Susan
Dear Susan, Thank you for your question. To install the Delta Tub Spout RP43161SS, the pipe would need to extend 1/2"-1 1/4" (13 mm- 32 mm) from the finish wall. This spout would not install on a 4" extended pipe. Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-24

Will this spout install on an existing RP12307 Adapter?

Asked by: hevkev
Hi Hevkev, Thank you for your question. The RP43161SS tub spout does use the RP12307 adapter and can be installed on your existing adapter. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2017-09-22

Will a RP43161SS thread onto a Delta adapter that has 1" threads at the wall?

I have an older Single handle shower faucet with a spout that looks like a RP17453. The home owner wants to upgrade here shower faucets. I have purchased a faucet repair kit and a new plate and handle. Now I need to replace the spout. She wanted brushed finish rather than chrome. Her existing spout has a plastic insert attached by t2o screws at thye wall end of the spout. This insert has 1" dia threads and threads onto a brass adapter that is approximately 2" long with an o ring at the discharge end. The spout screws onto this adapter. I have looked all over and can find 1/2" and 3/4" threads but no 1" threads.
Asked by: Al
Hi Al, Thank you for your question. The RP43161SS spout will thread onto the same RP12307 brass tub spout adapter that is used on the RP17453 spout. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-01-27

Is there a spout similar to this style with this connection that is a non-diverter. No shower, only for tub install.

Uses a RP12307 fitting on pipe, non diverter, similar style, and stainless finish
Asked by: Jennifer
Hi, Jennifer! Thank you for your question. The non-diverter tub spout that matches is RP43165SS. Here is a link to the unit: https://www.deltafaucet.com/bathroom/product/RP43165SS Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-09-22

Please email me the installation instructions for the RP43161 faucet.

Asked by: Leigh
Hi Leigh, Thank you for your question.The instructions for RP43161 come on the bag that is the packaging for the tub spout. I have attached a picture below with the instructions for this model. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2018-09-03

will this fit a wall mount with 1/2" npt connection

Asked by: jerry
Hello Anonymous, Thank you for your question. The tub spout adapter can be sweat onto 1/2" copper pipe or threaded onto 1/2" IPS. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-05-04

Can this diverter be taken a part and worked on?

Asked by: Danny6883
Thank you for your question, Danny6883! Our tub spouts are not designed to be taken apart and there are no repair parts available for this model. If the diverter is not working properly, the tub spout can be soaked in a 50/50 solution for twenty to thirty minutes; however, if the issue persists, we ask that you contact us directly at the warranty center for further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-07-10
  • y_2021, m_1, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_RP43161SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 41ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.