Linden™
Wand Assembly
Model#: RP60963AR
Wand Assembly
Linden™
Wand Assembly
Model#: RP60963AR
Finish: Arctic Stainless
List Price: $121.95
Online Price: $97.56
Free Shipping on All Orders $49+
Availability: In stock
PRODUCT FEATURES
SUPPORT
Installation Information
Connection Type :
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Is there a replacement aerator for this wand?

Asked by: Rebecca
Thank you for your question, Rebecca! This Delta wand does not have a removable or replaceable aerator repair part. We recommend cleaning the wand face with a 50/50 solution of white vinegar and water for mineral buildup and general maintenance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-04-07

having trouble switching from spray to stream on wand, when switching from spray to stream the spray does not fully stop flowing. Are there O-rings that can be replaced and how to perform.

Asked by: Thomas
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To place an order for you, we would like to gather some more information first. Could you please provide your full name, address, phone number, and date of install. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2020-07-09

how to disconect the spayer hose from the faucet

Hi have the new sprayer with the hose but I do not know how to removed from the faucet
Asked by: ricardo
Hi Ricardo, Thank you for your question! To remove the existing hose and wand, please make sure the water supplies are turned off. You can disconnect the hose from under the sink by pulling off the blue or black clip and pulling down on the hose. Next, pull the wand and hose all the way out from above the sink. With the wand connected to the new hose, slide the hose down through the faucet, connect it to the tube, and put the clip back on. I hope this helps! Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2015-12-28

The original wand no longer works. I received the replacement you provided. (RP60963RB) The original has a different connector mechanism. How do I take the old one out so I can install the new part?

Asked by: Spivnik
Hi Spinvnik, Thank you for your question. The Delta RP60963RB sprayer/wand assembly can be removed by simply unscrewing the sprayer from the hose in a counterclockwise position. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2019-10-30

How to clean clogged facet?

I had to turn off the water to repair a leak. After I turned on the water, bits of rusty crud was washed thru the water lines, apparently causing the facet to clog somewhat, greatly reducing the water flow. I opened the end of the wand (sprayer) and cleaned out what debris I could, but the water flow is still about half what the normal flow. What else should I do to remove the debris that is clogging and reducing the water flow?
Asked by: seyoung
Hi Seyoung, Thank you for your question. Depending on the faucet model you will want to check the valve assembly for debris and flush the lines out. I have attached a link to a video that will show you how to do this. Thanks, Dave http://www.deltafaucet.com/tools-resources/research/video-gallery/video.html?v=eWw-FdAezZY&cat=
Answered by: DeltaFaucet2
Date published: 2015-12-28

how to clean the filters

does this take a special tool
Asked by: Jan
Hi Jan, Thank you for your question. We recommend to soak the wand assembly in a 50/50 white vinegar and water solution to help dissolve any mineral deposits. You can also try tapping the back of the wand against a hard surface to remove debris. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-05-26

Is this wand assembly made of plastic or metal?

I like the shape of this faucet, but want a metal wand and not a plastic one.
Asked by: lavi
Thank you for your question. The wand assembly for the faucet is non-metallic. We do not manufacture any wands that are metal.
Answered by: Delta1
Date published: 2013-10-22
  • y_2021, m_3, d_6, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_RP60963AR, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 53ms
  • questions, product