Delta®
Plastic Pop-Up Assembly - Less Lift Rod
Model#: RP62472BL
Plastic Pop-Up Assembly - Less Lift Rod
Delta®
Plastic Pop-Up Assembly - Less Lift Rod
Model#: RP62472BL
Finish: Matte Black
List Price*: $51.50
PRODUCT FEATURES
SUPPORT
Installation Information
Over All Height :
5
Connection Type :
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Is there a gasket or seal under the stopper flange? I have a leak between the flange and the bottom of the sink. Instructions call for a silicone bead

Asked by: scoop
Hi scoop, Thank you for your question. We do recommend to use silicone under the flange. Unfortunately, we do not provide a gasket to go between the flange and sink. Please be sure to allow the silicone to fully cure (usually 24 hrs) before running water from the faucet. However, the included gasket should seal against the under side of the sink. If the sink is rough or uneven, you may need to use a thin bead of silicone. Please not that this pop up will only work with sinks with a depth of 1 5/8 - 2 3/8". Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-03-28

Can you order the rod for the drain lift?

The end of it rusted off .Tried a short one and its a problem
Asked by: rusty
Hi Rusty, Thank you for your question. The lift rod that will work with the RP62472 drain assembly is the RP6146. If you need the horizontal rod then RP12517 should work. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-09-09

Is there a part number for just the nut that hold the horizontal (ball) rod in?

Looking for the nut that holds the ball/rod in for the plastic pop-up assembly.
Asked by: buchanab
Hi buchanab, Thank you for your question. The nut is not available separately. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-06-07

How to order longer horizontal rod,one in the box is not long enough,need one with 10 inch long,installed undermount sink ,wide spread

Asked by: Temo
Hi Temo, Thank you for your question. Unfortunately, we do not manufacture a longer horizontal rod for the RP62472 Plastic Pop-Up assembly. However, we do manufacture a Metal Pop-Up assembly and Push Pop-Up assembly. We also do have longer horizontal rod options for the metal pop-up assembly. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533 https://www.deltafaucet.com/parts-product-detail?modelNumber=72173 Best regards, Tanya
Answered by: Tanya
Date published: 2018-03-26

How does the drain do with well water and water softener? Will it break down in color and corrode? 

Asked by: Vbaza
Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. We recommend using a 50/50 solution of white vinegar and water to use for cleaning. This will help dissolve mineral buildup, depending on calcium and mineral deposits in the well water. Please contact us back if you have any further questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2020-06-28

Do you have this part in metal not plastic Model#: RP62472. I have (3) of 15741LF-SP that I want to install with metal drain / pop up due to temperature fluctuations here.. Thank you 

Asked by: Val20
Hi, Val20! Thank you for your question. We do have an all Metal Pop Up drain assembly. The model number is RP26533. Here is a link to this assembly: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533
Answered by: Delta Faucet
Date published: 2018-06-08

Hello, I only need the top flange (oil rubbed colored) piece of the drain assembly. Is there a way to get only that piece and not the whole assembly?

Asked by: Jeff
Hi, Jeff. Thank you for your question. The top flange part on the Delta RP62472OB Pop Up Drain assembly is not available on it's own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-05-07

Can I just get the rod with the ball on it?

Can I just get the rod with a ball on it or do I have to buy the whole drain and every thing? The original rusted into two pieces poor design. Just over two years old.
Asked by: John V
Hi John V, Thank you for your question! You will need to order the RP12517 horizontal rod. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2017-10-24
  • y_2021, m_3, d_6, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_42
  • loc_en_US, sid_RP62472BL, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 12ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.