Windemere®
Two Handle Centerset Bathroom Faucet in Chrome
Model#:
25896LF
PRODUCT FEATURES
The Windemere™ Bath Collection brings timeless elegance and gentle curves to complement any bath setting. Delta® WaterSense® labeled faucets use at least 20% less water than the industry standard — helping you save water without compromising performance. You can install with confidence, knowing Delta products are backed by our Lifetime Limited Warranty.
- GUARANTEED QUALITY: Quality is our top priority, so all our centerset bathroom faucets are tested and certified, meeting or exceeding industry codes and standards
- EASY DIY INSTALLATION: Purposefully designed to install in 5 simple steps, with step-by-step instruction videos and tips available on Delta Faucet’s YouTube channel.
- 3 HOLE BATHROOM FAUCET: Fits 3-hole 4 in. centerset installations
- RELIABLE VALVE: Valve cartridge is tested to last at least 500,000 uses to ensure high performance with less drips and a smooth bathroom faucet handle operation.
- CORROSION-RESISTANT FINISH: Delta® Chrome bathroom faucet finish is intentionally engineered for durability and tested for corrosion resistance to at least 2 times industry standards
- TESTED AND CERTIFIED: All Delta® bathroom faucet finishes are third-party certified and vigorously tested under extreme conditions to ensure years of dependable use without cracking, peeling, chipping, blistering or changing color over time
- EASY-TO-CLEAN DRAIN: Push pop-up drain unscrews from above the deck for quick removal and easy cleaning of hair and other bathroom sink debris
- LIFETIME LIMITED WARRANTY: You can install with confidence, knowing Delta® bathroom faucets are backed by our Lifetime Limited Warranty and repair parts
- LIVE CUSTOMER SUPPORT: You can rely on us for high quality bathroom fixtures backed by our highly trained customer service team, ready to help through the life of your faucet
- CORROSION-RESISTANT MOUNT: Durable, long mounting shanks are designed to resist corrosion and accommodate a larger countertop thickness
- PREVENT SHIFTING: Lock nuts secure bathroom sink faucet base tightly into place to prevent shifting over time
- EPA-CERTIFIED: WaterSense® labeled bathroom sink faucet uses at least 20% less water than the industry standard without compromising performance
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Eco-Friendly
WaterSense® Labeled
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
3-hole 4" installation
Connection Type :
1/2" IPS
Flow Rate :
1.2 gpm @ 60 psi, 4.5 L/min @ 414 kPa
Overall Height (in.) :
8-3/8
Valve Type:
Cartridge
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
Annette from
Great faucets
I have double sinks in my guest bathroom, and these faucet pedestals are an exact replacement of original (30 year) faucets.
They are sleek, pretty and very functional
Date published: 2026-08-03
Rated 1 out of
5
by
Susan72 from
Disappointed
Windemere cold water is leaking bad. I replaced the stem and everything else and is still leaking!!!
Date published: 2026-06-24
Rated 5 out of
5
by
Bathroom from
Looks great
Looks and works great
Date published: 2026-03-13
Rated 5 out of
5
by
thrill from
great look
great look,,,very easy to install....I am now a Delta customer
Date published: 2026-01-16
Rated 5 out of
5
by
Ampraw from
Nice product
Works really well and easy install
Date published: 2025-12-08
Rated 5 out of
5
by
Lanie from
Great look!
I love the look of my new Delta fixtures.
Date published: 2025-12-03
Rated 1 out of
5
by
Workingmom from
Faulty push plug
Bought this because I loved everything about it. Installation was easy and looks nice. However, after using it for about three months, the water was draining slow. I took the “P” trap apart under the sink thinking it was plugged, it wasn’t. I dumped nearly two gallons of water down the drain pipe and no trouble draining. Come to find out it’s the push plug in the faucet kit that’s making it drain slow. I’ve yet to take that all apart to look at the problem, but it’s not the drain plumbing under the sink or under the bathroom crawl space.
Date published: 2025-12-02
Rated 5 out of
5
by
Joey from
Easy operation
Easy to install, it’s has been great new look, works wonderfully
Date published: 2025-10-21
Q&A
I would like to make sure that this Windemere Roman Tub Trim is a proper replacement for the 12 year old delta faucet I currently have, thanks.
Dear Cookie,
Thank you for your question. If your current tub spout has a set screw on the back side of the spout, then any of our trim kits that start with a T27 will interchange for you.
If your current tub spout does not have a set screw on the back side of the spout, then you would need to install a R2707 rough in valve below your tub decking to be able to use the new trim kits.
Best regards,
Tanya
Date published: 2018-05-03
What cartridge is used to repair a leak?
Hi, Jason!
Thank you for your question. The stem unit assembly, RP24096, and the RP4993 Seats and Springs Kit will fix a leak for the Delta BT2796-OB Roman Tub Faucet.
Best Regards, Rosanna
Date published: 2024-03-28
How do I take it apart?
Hello!
To remove the handles you will press down firmly and turn the handle counterclockwise at the base until fully unthreaded.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-06-11
Does this faucet come with handle cartridges? And if not please advise what part number is for this faucet.
Hi Don, Thank you for your question!
The BT2796-OB is the trim only. The stem cartridges comes with the rough in valve R2707.
Best regards, Brandis
Date published: 2024-03-28
What is the rough in kit item number for BT2796-OB?
Thank you for your question. Delta Faucet model # BT2796-OB will need a rough-in kit with the model number of R2707 to make a complete faucet.
Date published: 2024-03-28
What part # is the replacement aerator? 25896lf-ob
Hello,
Thank you for your question!
This model uses the RP102086 aerator.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-09-22
We are trying to upgade the look of our 26 year old Delta Roman Tub.
It is on 10"centers. Should this product fit without having to replumb using the rough in kit?
Thank you for your question. Since the faucet you have now is a Delta Faucet, you should have no trouble with any of our current Roman Tub trim kits.
Date published: 2024-03-28
How do I get the aerator out of the faucet? It keeps getting moldy. I don't see how to detach it. I'm guessing it's because the aerator is plastic. The rest of my sink aerators are stainless and don't do that.
Hello Customer!
Thank you for your question and we are happy to help. The aerator for the Delta 25896LF comes off by twisting. Using a towel and a wrench may work if it is stuck. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2025-11-18
My faucet is leaking back into the cabinet. I've tightened the screws underneath, and it's still leaking. It doesn't leak when the handles are in the off position, and it doesn't come out of the spout. What do I need to do
I believe we have the Windermere faucet. It is leaking at the handle (hot) and I want to replace the seat, spring and o-ring. I'm not sure what the model number is for replacement parts.
Hi Charley,
Thanks so much for contacting Delta Faucet Company about, 25896LF!
Our standard RP4993 seats and springs would rectify a leak when off. The RP24096 is the standard stem that would rectify a leak from under the handle. I have also included a link to the parts diagram for the 25896LF, some models have model specific repair kits.
https://media.deltafaucet.com/PartsDiagram/DPD-L-25896LF%20Rev%20C.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-02-16
Can the Windemere centerset bathroom faucet be installed without the deck plate?
Hi Brook,
Thank you for your question about the Delta Faucet centerset model 25896LF.
I recommend the similar widespread model 35896LF. The centerset faucet cannot be installed without the base plate.
https://www.deltafaucet.com/bathroom/product/35896LF.html
Please reach out if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2023-05-26
Can the faucets and spout be installed without the face plate? One of our faucets broke. It is installed like a widespread but it’s only 4” spread.
Hi Rose,
Thank you for your question about the Delta Faucet model 25896LF.
This faucet cannot be installed without the escutcheon plate as a 4" widespread. Some of our widespread faucet models can be installed with 4" centers. See models:
3571-PR-MPU-DST
3551-MPU-DST
357756-MPU-DST
35776-MPU-DST
35775-MPU-DST
357766-MPU-DST
35548LF-MPU
3593-MPU-DST
3555-MPU-DST
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
The Aerator wrench was missing from both faucets that I purchased. Where can I get them
Hello Curtis,
Thank you for reaching out to Delta Faucet Company!
We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter.
We appreciate your feedback. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2024-01-31
How do I remove a seat & spring (RP4993) located under valve stem (RP25513)? I don't see them. Is there a special tool to remove them? Many Thanks - JG
Hi JoeG,
Thank you for your question! I have included a link on the FAQ section on our website, that shows some instructions on how to replace the RP4993 seats and springs. You will want to look at "What do I do about water dripping from the spout of my two-handle lavatory faucet?", which is where you will find an instructions diagram. Feel free to contact us directly, if you need further assistance.
https://www.deltafaucet.com/service-parts/frequently-asked-questions/leaks
Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Date published: 2024-10-30
What cartridge number is compatible for model 25896LF? Thanks!
Hi mark,
Thank you for your question about the Delta Faucet model 25896LF.
A kit that includes a pair of stems or cartridges is either RP101069 or RP101504, depending on the number on the back of the faucet. RP101069 for "500926". RP101504 for "413763" or "501052". See here for more information:
https://media.deltafaucet.com/PartsDiagram/DPD-L-25896LF%20Rev%20D.pdf
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-05-07
How coy you get the aerator out to clean it. Is there a special tool?
Hi Carol,
Thank you for your question about the Delta Faucet model 25896LF.
The finished end of the spout unscrews counterclockwise with the aerator inside. If it is difficult to remove, I recommend using a rag or paper towel soaked with 50/50 white vinegar and water to wrap around it for an hour and then rinse the finish, to help remove mineral deposits.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-07-25
Does the spout swivel?
Hi User247,
No, the spout for this model does not swivel.
Please reach out with further questions!
Sincerely,
Themar
Digital Communications Specialist
Date published: 2026-09-11
I have just installed a new Delta bathroom faucet, Windmere Model 25869LF-BN. I need to connect a 3/4" garden hose to this faucet, but the adapters all are 55/64 female thread and are too big for this faucet. What size thread is used for this model?
Hi Neal, thank you for your interest in the 25896LF!
The aerator threads are 3/4-27UNS.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2023-03-19
Does this Fawcett swivel side to side?
Hello!
No, the spout for this model will not swivel.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-09-06
BT2796-OB IS JUST THE TRIM KIT DO YOU HAVE A NUMBER TO ORDER THE FAUCET COMPLETE ?
Hello Dan F,
Thank you for your question! I am happy to help you!
Our Delta BT2796-OB takes the R2707 rough valve which will need to be purchased separately.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
How can I change the aerator the cap doesn't seem to unscrew.
Hello!
If aerator removal is difficult we recommend wrapping a cloth soaked in a 50/50 solution of white vinegar and water around the aerator. This will help breakdown any mineral buildup making removal difficult.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-06-16
How can I get the handles to face correctly without a screw ? They currently face the back ?
Hi sweetcheeks,
Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help!
I recommend making sure the handle valves are installed with the long copper tubes facing away from the spout. Check that the side labeled for hot water is installed on the left side.
The handles are removed by turning the handle base counterclockwise. The stops on the stems should point to the center of the faucet for proper handle rotation.
See the maintenance and installation manual for more information:
https://media.deltafaucet.com/MandI/107687%20Rev%20H.pdf
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-01-31
how do you operate the push top on the Windemere 25896LF-OB?
Hi Steve D,
Thank you for your question!
The stopper for the drain assembly is engaged by pressing it down with your finger and pressing it back up again to release it.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-01-31
There is a black rubber o-ring coming out between the base of the handle and the handle that turns. HOw do I seperate the pieces and what o ring do I need?
Hi PSUPaul,
Thank you for your question about the Delta Faucet model 35896LF-BN.
If the o-ring is part of the handle assembly, the handle assembly may need to be replaced. To remove the handle, turn the handle base counterclockwise. See the parts diagram to determine the replacement handle needed:
https://media.deltafaucet.com/PartsDiagram/DPD-L-35896LF%20Rev%20F.pdf
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Date published: 2026-01-13
I am still trying to get the end piece for the faucet. Model # 25896LF, I tied looking up PR102086. The threads are stripped and won't stay on. I've looked Amazon, Ace, Lowe's. NO ONE HAS IT!! HELP
what Delta faucet replaced the valdosta which was discontinued? I need to identify replacement cartridges (hot and cold) for the valdosta.
Hi Bill,
Thank you for your question! The centerset bathroom faucet in the Valdosta collection is model 25757LF. Our recommended replacement faucet for this model is 25798LF.
Replacement stems for the Valdosta faucet are available as part number RP100192.
https://www.deltafaucet.com/parts/product/RP100192.html
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2025-01-10
Need model number
Hello K888,
Thank you for reaching out to Delta Faucet Company!
The model number is B2596LF-SS.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2024-01-31
We purchased two of these faucets for our bathroom remodel and we are VERY disappointed with the lack of pressure. Is there a way to get higher volume water out of these faucets?
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
The max flow is 1.2 GPM @ 60 psi, 4.5 L/min @ 414 kPa.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-02-07
I have this faucet, 35896LF-OB and lost the aerator and cap that screws on to hold the aerator in place. How do I get replacements? I was unable to find the part number in the literature. Thanks
Hello Customer!
Thank you for your question and we are happy to help. The entire aerator would need to be replaced. The RP102086OB is the correct part. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2024-08-27
The faucet on our Windemere is loose. How can I tighten it?
Hello!
Please see the following parts diagram to determine which version of this faucet you have. On the back of the spout at the base will be a supplier code which will either be 501052, 413763, or 500926.
https://media.deltafaucet.com/PartsDiagram/DPD-L-35896LF%20Rev%20F.pdf
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-08-07
PART LIST
PART LIST
View Product
![Image-Master-RP100137]()
DELTA
DELTA Push Pop-Up
List Price:
$43.30
-
$76.10
Free Ground Shipping All Orders $49+
RP100137
View Product
![Image-RP101504]()
Only at Home Depot
Only at Home Depot
DELTA
DELTA Valve and Bonnet Nut
List Price:
$24.10
Online Price:
$19.28
Free Ground Shipping All Orders $49+
RP101504
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.