Bathtub Wall Set in High Gloss White

Thank you for your question, Megan! This unit is 31" x 60" x 80". The side panels are 27-1/2" wide, the corners are 13" x 3-7/8", and the back panel is 35" wide. Best regards, Jon

Hello Andy, Thank you for your question regarding the Delta Bathtub Wall Set and I am happy to help you today. Unfortunately, we do not manufacture single panels for this or any of our wall surrounds at this time and I apologize for the inconvenience. All of our direct to stud wall surrounds are formed as one piece and cut into three individual pieces which are packaged as a kit to ensure the panels fit seamlessly with one another once installed. Again, I am very sorry that we do not offer individual panels for any of our surrounds and if there is anything further that we may be able to help with, please do not hesitate to give us a call on our warranty line at 800-355-2721 and we will be happy to help you where we can. Thank you, Brandy

Thank you for your question, Joe71! This Easy Up Galiant bathtub wall set is 31 in. x 60 in. x 80 in. It is made from a durable poly composite material and is installed using adhesive so this can be modified to fit. To trim the side or back panels, score with a utility knife and straight edge and then snap apart. Scissors may be needed to trim corner panels and check to be sure measurements are accurate. Please also refer to the maintenance and installation manual before making this adjustment and be sure to follow the guidelines below on choosing the correct adhesive for your installation. https://media.deltafaucet.com/SealantandAcrylicCareGuide/93471%20Rev%20A.pdf Best regards, Edward

Hi randaddy, Thank you for your question about the Delta Faucet model 40164. This tub surround could also be used with a shower. It has a height of 80" and is installed on water-resistant drywall. Our shower bases can also be installed with drywall, so this wall set could be used. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi,danny! Thank you for your question. The 40164 Bathtub Wall Set is 31 in. x 60 in. x 80 in. It is made from a durable poly composite material and is installed using adhesive so this can be modified to fit. Please also refer to the maintenance and installation manual before making this adjustment and be sure to follow the guidelines below on choosing the correct adhesive for your installation. https://media.deltafaucet.com/SealantandAcrylicCareGuide/93471%20Rev%20A.pdf Best regards, Themar

Hello! Yes, the panels can be cut to accommodate a window. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Home Alone Keith, Thank you for your question about the Delta tub wall set 40164. Unfortunately, the panels aren't available individually. I apologize for the inconvenience this causes. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Chris, Thank you for your question about the Delta Faucet model 40164. The panel thickness is approximately 1/16". Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com