Delta®

Surface Mount Body Spray in Stainless

Model#: 50102-SS
Add to Favorites
Find local Delta® installers.
Delta®
Surface Mount Body Spray in Stainless
Model#: 50102-SS
List Price: $26415
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Add an element of luxury with this Classic 1-Spray Body Spray. Designed for performance, the understated and elegant Classic Bath Series withstands the test of time in any setting. Getting ready in the morning is far from routine when you are surrounded by a bath that reflects your personal style.
  • Surface mounted
  • 1/2" rough-in
  • Features Touch-Clean soft, rubber nubbins that allow you to easily wipe away calcium and lime build-up with the touch of a finger.
  • Surface mount
  • 30° up and down spray adjustment
  • Installation requires a 1/2 in. male threaded pipe fitting to extend 1/4 in. beyond the finished surface
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
Touch-Clean®
Brilliance® Finish
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
Register Product
Installation Information
Connection Type :
3/8" O.D. inlets or WF = 1/2" IPS
Flow Rate :
1.75 gpm @ 80 psi, 6.6 L/min @ 552 kPa
Overall Height (in.) :
2-7/16
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

What other components need to be purchased to install this unit new?

Asked by: loriboy
Hi Loriboy, Thank you for your question. The 50102-RB body spray will need a faucet rough R10000, any of our faucet trims, the R11000 diverter rough, and a matching diverter trim that will control the showerhead and body sprays to make a complete faucet. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

how far back does the the 1/2 rough in half to be from finish wall

Asked by: lutz
Hi lutz, Thank you for your question. The rough in for the 50102-RB body spray is shown on the spec sheet at 1-1/2". The 1/2" pipe nipple needs to extend out 1/4" from the finished wall. I have attached links to the owners manual and the spec sheet below. Thanks, Dave http://www.deltafaucet.com/customersupport/documentation/50102-rb.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper http://www.deltafaucet.com/customersupport/documentation/50102-rb.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Answered by: DeltaFaucet2
Date published: 2024-03-28

For a body spray Model:50102 what is the Body Spray Rough Model number that goes with it. I have Model:R50001 rough but It doesn't match. I purchased it at Lowes, they said call Delta. I have been on hold for 30 minutes, thought this might be faster....

Asked by: Mike
Hi there, Mike! Thank you for your inquiry. The Delta Surface Mount Body Spray 50102 installation requires a 1/2” male threaded pipe fitting to extend 1/4” beyond the finished surface. There is no rough-in needed for this body spray. Please see the below Maintenance/Installation document link. https://media.deltafaucet.com/MandI/60865%20Rev%20E.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Hello, When I had my shower remodeled several years ago, four Delta body sprays (model 50102) were installed. Recently, I've noticed the flow on some has been slow. How do I remove them in order to clean them? Thank you.

Asked by: Clean 50102 Body Sprays

Is there a decorative plug/cap that goes into the access hole for the set screw?

Asked by: Waterman
Hi Waterman, Thank you for your inquiry, we apology for any inconvenience you may be having with your product. Unfortunately, this body spray does not have a cover for the set screw. We appreciate your business and look forward to continually serving you. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

Mine are positioned to the right of center on the valve and shower head wall. The degree of motion 30 degree range goes side to side and up and down. The spray shoots past my body and does not turn inwards far enough. Please Help?

Asked by: Big red
Hello Big red, Thank you for your question! I am sorry that the information you are inquiring about the Delta Faucet Surface Mount Body Spray, model 50102, is not readily available; however, I am happy to help you. 50102 has a total adjustment of 30 degrees up and down (vertical). This body spray does not adjust inward towards you. This item is recommended to be installed where you want the water to go. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma
Answered by: Customer Service
Date published: 2024-03-28

our home has above average water pressure.  we have a pressure relief valve installed at the main water line to keep from blowing gaskets....so we have good water pressure for the body jet.  Is there an average spray depth/distance in to the shower?

Asked by: do it designer
Thank you for your question, do it designer! I have included a link to the Technical Specifications for model 50102-KS, for you to refer to. https://media.deltafaucet.com/SpecSheet/dsp-b-50102_E.pdf Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

How many degrees does head rotate 

Asked by: DreamStyle
Hello DreamStyle, Thank you for your question! I am happy to help you! Our Delta 50102-CZ has a 30˚ up and down adjustment. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

How can I balance the flow from my two sprays? Top one has full spray and lower one does not. I exchanged the heads and still had the same problem.

Asked by: Deano
Hello Deano, Thank you for your question. We are happy to help! We would recommend flushing the spray pipes with the spray heads removed. If the issue remains, unthread and clean the trim bodies. Check if the flow is even from the two supply pipes. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Does the Delta Surface Mount Body Spray in Black Stainless Model#: 50102-KS pivot in all directions or only up and down? Thanks

Asked by: James 123
Hi James 123, Thank you for your question about the Delta Faucet 50102-KS. This body spray pivots up and down only. Our Hydrachoice body sprays can pivot in any direction. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-06-11

How do you install this is body sprays and shower head can work at the same time or just the shower head?

Asked by: mylesaway23
Hi mylesaway23, Thanks so much for contacting Delta Faucet Company! This body spray connects to a 1/2" male threaded pipe connection. If you have a 3 or 6 setting diverter you can utilize body sprays and a shower head at the same time. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-27

What is the part number  for the o ring shown on the pipe nipple in the installation diagram?

Asked by: John
Hello John, Thank you for your question. We are happy to help! The Delta Faucet 50102-RB surface mount body spray would be installed to a threaded pipe nipple. Plumber's tape should be used on the pipe nipple. Unfortunately, only the set screw of the 50102-RB body spray is available as an individual part number. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

My spray will no longer stay in one place

Asked by: Bill F
Hi Bill F, Thanks so much for contacting Delta Faucet Company! The Surface Mount Body Spray MODEL#: 50102-RB has a total adjustment of 30 degrees up and down (vertical). Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-09-13

Is it possible to just get new covers and rubber inserts?

Asked by: Curydogblues
Hello Curydogblues! Thank you for contacting us at Delta Faucet! I will be happy to help! Unfortunately, no. We do not offer individual parts to rebuild this body spray. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com as we would like to resolve this matter for you at this time. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Is there a thicker escutcheon plate for the 50102-BL body spray. The 1/2”male fitting extends 3/4” from the finished ceramic tile

Asked by: EdDawg
Hello EdDawg, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. Unfortunately, we do not offer a larger plate for the Delta Faucet Surface Mount Body Spray In Chrome MODEL# 50102. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

How do you remove the cover off the front?

Asked by: Timothy
Hello Timothy, Thank you for your question. We are happy to help! The spray assembly can be removed from the trim body nipple by loosening the set screw on the spray assembly. The manual can be found here: https://media.deltafaucet.com/MandI/60865%20Rev%20F.pdf Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I have a surface mount body spray model #50102. I'm trying to remove it from the rough-in pipe and I need to know the correct size allen wrench to fit the set screw.

Asked by: Dana
Hello Dana, Thank you for your question! I am happy to help you! Our Delta 50102 has a set screw that takes a 3/32" allen wrench. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can I buy replacement parts?  The collar and base were damaged when my contractor took it off to replace the tile. I don’t want to but the whole sprayer of all I need is the base and collar. Thank you!

Asked by: Jason
Hello Jason! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. Unfortunately, there are no replacement parts for the Delta® Surface Mount Body Spray In Venetian Bronze MODEL#: 50102-RB. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28
  • y_2026, m_7, d_30, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_26
  • loc_en_US, sid_50102-SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 107ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.