Single Handle Bathroom Faucet in Champagne Bronze

Hello Cindi, Thank you for your question about the Delta Faucet model 553LF-SS VERO® Single Handle Bathroom Faucet. I apologize for any difficulty finding this information. We are happy to help! To access the flow restrictor, first, turn off the water supply and remove the button cover under the handle. Loosen the handle set screw and remove the handle. Remove the cap and unscrew the bonnet nut. Then, the cartridge can be removed to access the flow restrictor, o-ring, and brass insert. A small tool like an o-ring pick may be needed to remove the flow restrictor. See the faucet manual for more information: https://media.deltafaucet.com/MandI/86513%20Rev%20E.pdf Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! It is possible this issue can be resolved by cleaning the product. We recommend you try soaking the product in a 50/50 solution of water and white distilled vinegar. This could break up any possible calcium buildup inside. If the faucet exhibits very low flow: SHUT OFF WATER SUPPLIES. Remove the handle, trim cap, bonnet nut, and valve. Remove the adapter using long nose pliers. Remove the flow regulator using an O-ring pick or similar tool. Clean any debris from inside surface of flow regulator. When reinstalling parts, ensure bonnet nut is tightened securely with wrench. Failure to securely tighten bonnet nut with wrench could result in water damage. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi tonya, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! The issue is likely caused by common water debris trapped in the faucet. We recommend cleaning the flow regulator located behind the handle cartridge. See the faucet manual for more information: https://media.deltafaucet.com/MandI/86513%20Rev%20G.pdf Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Valued Customer, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 553LF Vero® Single Handle Bathroom Faucet In Chrome technical specification sheet can be viewed using the below link. No Delta Faucet lavatory faucets have an 8-9 inch spout reach. We apologize for any inconvenience this may cause. https://media.deltafaucet.com/SpecSheet/DSP-L-553LF%20Rev%20H.pdf Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Chris, Thank you for your question about the Delta Faucet model 553LF-SS. The stream straightener at the end of the spout is not designed to be easily removed. If needed, a replacement stream straightener is available as part number RP76571. We recommend using needle nose pliers to work it out of the spout. Recommended maintenance is to soak the area with 50/50 white vinegar and water if needed for mineral deposits. Clean the flow restrictor behind the handle cartridge if there is an issue with the faucet's flow rate. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Steve, We apologize for any issue with your Delta Faucet 553LF-SS. We are happy to help. The issue is likely debris in the supply line or faucet. We recommend removing the supply lines and flushing with water into a bucket. Then, remove the faucet cartridge and flow restrictor to flush water through the faucet valve. Use a bucket to redirect the water that will shoot from the valve. If the issue remains, replace the cartridge RP50265. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi Florida faucets, Thanks for your question regarding 553LF! The Stream Straightener (RP76571) can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Our products have a Lifetime Limited Warranty that covers parts and finishes being free of defects in material and workmanship for the original owner/purchaser. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello fairlyunreliable, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 553LF-RB Single Handle Bathroom Faucet includes a flow restrictor and has a stream straightener to reduce splashing. It does not have an aerator. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Rich969, Thank you for your question about the Delta Faucet model 553LF-SS. The drain assembly included with this faucet would be model 33W576SS. The stopper is 33D661. https://www.deltafaucet.com/parts/product/33W576SS.html You can purchase Delta Faucet products at many local dealers and internet sites. If a dealer does not carry a specific item in stock, they should still be able to place an order for you. I recommend using our store locator. https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello OKIEPOKE, Thank you for your question! I will be happy to assist! Model 553LF has a stream straightener and does not have an option for another aerator. This model has flow restrictors inside of the valve, however, that would be changing the flow rate. Please contact us back if you need further assistance. Best Regards, Kyra

Hello Schmid, Thank you for your question. We are happy to help! The Delta Faucet 553LF does not currently have a model with Touch2O.xt technology. We apologize for any inconvenience this causes. You can view our available faucet with the proximity sensing Touch2O.xt technology here: https://www.deltafaucet.com/bathroom/sink-faucets/touchhands-free Best regards, Bryan

Hi Annalee, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to a build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean, soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse the surface thoroughly with water afterward. I have also included a link to our “How to clean your faucet” on our website, please see the link below. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello Debbie, Thank you for your question regarding the Delta Faucet Single Handle Bathroom Faucet, model 553LF-RB! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Allowing water to evaporate on the surface can lead to the build-up of mineral deposits, and we recommend blotting the faucet dry after use to prevent this from happening. However, water spots and fingerprints can be easily cleaned by wiping the finish with a damp cloth. If additional cleaning is needed, we recommend using a 50/50 solution of white vinegar and water. RB is our Venetian Bronze finish. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello john04, Thank you for contacting us, I would be happy to help you. The 553LF-SS stream straighter can be removed by simply pulling the stream straightener straight down and out with needle nose pliers. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Jack, thank you for your interest in the 553LF! Cataloged Models and Creations can take 1-3 weeks to ship. Special Model's lead time will be determined when requirements are finalized. Estimated lead time: 3-4 months. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. We recommend soaking the aerator in a 50/50 solution of white vinegar and water. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi cym12, thank you for contacting Delta Faucet Company! The escutcheon plate that can be separately purchased, RP63970RB, is 6" inches long and should cover centerset installations. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello kaitie1233, Thank you for your question! I am happy to help you! Our Delta Lavatory Faucet model 553LF takes the stream straightener RP76571, Please see the parts diagram link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-553LF_A.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hello Kelli! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Vero® Single Handle Bathroom Faucet In Stainless MODEL#: 553LF-SS pop-up assembly is part 33W576 and the entire unit would need to be ordered. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi diyer, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Vero® Single Handle Bathroom Faucet In Chrome MODEL#: 553LF. Here is what we can do to resolve your issue for you. We do recommend flushing the valve; It will allow the removal of debris in the lines. Here are the steps for flushing your faucet. Please shut water supplies off before starting this process. You will need Phillip's screwdriver and start by popping the cap off of the handle. Then you would remove your handle with the screwdriver. Please pull the handle off of the cartridge, you will then find the cap and bonnet nut. Both the cap and bonnet nut would be unthreaded from the faucet. The next part you should see is the cartridge, please grab and pull it out. Then, using needle-nose pillars, grab the brass insert and pull it out. Under the insert is the flow restrictor and this is where the blockage would be located, once cleaned follow the directions in reverse for reinstall. Lastly, place the towel behind the back of the handle, then put the bucket over the top of the towel covering the opening in the valve. Have someone turn the cold/hot water supply on for about 30 seconds to a minute. After this, shut the water off and follow the directions above in reverse for the reinstallation of the flow restrictor, cartridge, and handle. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Susan, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Vero® Single Handle Bathroom Faucet In Chrome MODEL#: 553LF can not be installed with the handle on the left-hand side, the spout and handle would not operate properly, I am sorry for any inconvenience this may have caused. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Lewis, Thank you for your question. We are happy to help! To remove the bonnet nut on the Delta 553LF faucet, remove the set screw cover with a small tool and loosen the set screw with a 3/32" hex wrench. With the handle removed and the water supply off, the cap will pull off the bonnet nut and a wrench can be used to remove the bonnet nut. https://media.deltafaucet.com/MandI/86513%20Rev%20E.pdf Best regards, Bryan

Hi Nate, Thank you for your question! Yes, this faucet includes the RP47030 nut and wrench. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Anonymous, Thank you for contacting us, I would be happy to help you. Delta Faucet Company does not have finished options for under the counter, You may be able to find something online or locally through a 3rd party company. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Pat D, Thank you for contacting us, I would be happy to help you. We do recommend flushing the valve; It will allow the removal of debris in the lines. Here are the steps for flushing your faucet. Please shut water supplies off before starting this process. You will need Phillip's screwdriver and Start by popping the cap off the front of the handle. Then you would remove your handle with the screwdriver. Please pull the handle off of the cartridge, you will then find the cap and bonnet nut. Both the cap and bonnet nut would be unthreaded from the faucet. The next part you should see is the cartridge, please grab and pull it out. Then using needle nose pillars grab the brass insert and pull it out. Under the insert is the flow restrictor and this is where the blockage would be located, once cleaned follow the directions in reverse for reinstall. Please contact back with any further questions. Best Regards, Nicole

Hello Kelli, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our Delta Faucet Vero® Single Handle Bathroom Faucet In Stainless, model 553LF-SS; however, I am happy to assist you! The part number for the pop-up is 33W576, and the entire pop-up unit would need to be ordered. I apologize for any inconvenience that this may cause. Parts Diagram for model 553LF: https://media.deltafaucet.com/PartsDiagram/DPD-L-553LF.pdf Thank you for being a loyal Delta Faucet customer! Please feel free to contact us back with any further questions. Best Regards, Emma