Universal Showering

30" Adjustable Glide Rail Wall Bar in Chrome

Model#: 55531
Universal Showering
30" Adjustable Glide Rail Wall Bar in Chrome
Model#: 55531
List Price: $22400
PRODUCT FEATURES
  • With pin mount
  • Adhesive or screw installation
Documents & Specs
Installation Information
Overall Height (in.) :
30-9/16
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 4 out of 5 by from As per picture Installed this a couple of months ago as part of major bathroom remodel. Wanted an adjustable bar that didn't stick out from the wall, as the shower is narrow. You can either screw it into the tile or use adhesive tape provided. I used the tape but it came loose within a week or two. I then added some caulk, and so far it is holding until I decide exactly where I want to permanently mount it with screws. Note: The slider/pin mount is plastic and it seems it could break off through repeat mountings/dismounting of handshower. I was told you cannot buy just that piece if does break, so I am very careful with it!
Date published: 2016-12-07
  • y_2026, m_9, d_24, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_55531, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 8ms
  • reviews, product
Q&A

Can you buy the 55531 adjusting pin separately?

Asked by: Tee gee
Hello Tee gee, Thank you for your question regarding the mount for the Delta 30" Adjustable Glide Rail Wall Bar and I am happy to assist you today. The bar slide can be purchased separately and can be located under model number BAS4BX. Please feel free to give us a call if we can assist you with anything else going forward at 800-345-3358. Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Brandy
Date published: 2024-03-28

How do you remove the top chrome "cap" in order to slide off clear acrylic adjusting knob and slide new one backm on glide bar?

Asked by: tom2298
Hi tom2298, Thank you for your question about the Delta Faucet model 55531. The end caps slide off. It may be necessary to carefully pry them off from the back to avoid damaging the finish. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

How far apart are the mounting screws? - Al 

Asked by: Oldfarmal
Hello Oldfarmal Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The length between the mounting screws on the Delta Faucet model 55531 30" Adjustable Glide Rail Wall Bar is not listed. Please use instruction B on page 2 of the below installation guide for assistance with proper installation. https://media.deltafaucet.com/MandI/72633RevB.pdf Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

What is the width of this bar? I need something that is 1.5”.

Asked by: Nancy
Hi Nancy, Thank you for contacting Peerless Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet 30" Adjustable Glide Rail Wall Bar In Chrome MODEL#: 55531 dimensions are 0.748" tall and 0.760" wide, unfortunately, we do not have anything 1.5" wide. I am sorry for any inconvenience this may have caused. Thank you for being a loyal Peerless Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I have a 30" Delta Shower Bar and the "thing" that holds the shower head does not hold the head in place. I have tried tightening up the screw but it does not hold. Is there Is there anywhere I could purchase just the "thing"

Asked by: Bill
Hi Bill, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-04

Is there a way to buy just the end caps?

Asked by: Joe313
Hello Customer! Thank you for your question and we are happy to help. Unfortunately, these are not available. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Digital Specialist
Date published: 2026-04-10
  • y_2026, m_9, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_55531, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 68ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.