Single Handle High-Arc Bathroom Faucet
Trinsic®
Model#: 559HA-GPM-DST
-
Water-Efficient
-
No-Lead Compliant
-
WaterSense® Labeled
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- Single hole installation
- Metal push pop-up
- ADA Compliant
- WaterSense® labeled faucet uses at least 20% less water than the industry standard without compromising performance
- High-arc spout swivels 360degrees
DIAMOND™ Seal Technology
Installation Information
Single hole installation
- Flow Rate: 1.00 gpm @ 60 psi, 3.8 L/min @ 414 kPa
- Spout Height: 8-3/4"
- Spout Length: 5-5/8"
- Deck to Outlet: 5-3/4"
- Fittings Type: 3/8" compression fittings
- Drain Type: Metal push pop-up
- Deck Thickness: 2.5"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: Euromotion DIAMOND™ Valve
Where can I find the matte black version?
I'm looking for the product featured in this post: https://www.deltafaucet.com/design-innovation/inspiredliving/matte-black-style-for-the-bathroom
Trinsic Single-Handle High-Arc Lavatory Faucet
But don't see it in the right finish. Where can I find?
thanks!
MFDenver,
Thank you for your question. The single-handle Trinsic faucet shown in this article is model number 559HA-BL-DST, which has a 1.2 GPM flow rate. The model 559HA-GPM-DST has a 1.0 GPM flow rate and is only available in the Chrome finish.
You can purchase the RP73805 1.0 GPM aerator for the Matte Black model 559HA-BL-DST separately.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP73805
Best regards,
Jon
Date published: 2017-12-26
when the handle is straight up, should the water comming out be hot or cold?
Hello Gary,
Thank you for your question. For the Euro Motion lavatory faucets such as the 559HA out to the right when turning on will be Hot water and towards you will be Cold.
Best regards,
Brandis
Date published: 2017-10-05
Is there an escutcheon?
Do you make an escutcheon to cover 3 holes when I replace an existing faucet with hot/cold controls?
Hi Biblio,
Thank you for your question. Unfortunately, we do not make a three-hole escutcheon plate for this model.
Best regards,
Jon
Date published: 2017-09-01
