Single Handle Channel Bathroom Faucet

Ara®

Model#: 568LF-MPU
Ara Single Handle Channel Lavatory Faucet is rated 3.4 out of 5 by 9.
  • y_2018, m_6, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_568LF-MPU, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 33ms
  • REVIEWS, PRODUCT

Download Image


Compare Favorite Add To A Project View my Items image/svg+xml Print
Finish: Chrome
List Price (US $):
$339.15

BASE PARTS
568LF-MPU
$339.15

  • Water-Efficient
  • No-Lead Compliant
  • WaterSense® Labeled
  • Open channel spout creates a harmonious waterfall ambiance
  • Laminar flow lends a beautiful, refined look that complements the design of the faucet
  • 1 or 3-hole 4" installation
  • Metal pop-up
  • ADA Compliant
  • WaterSense® labeled faucet uses at least 20% less water than the industry standard without compromising performance
  • Channel spout

Special Features

  • ADA Compliant

Installation Information


1 or 3-hole 4" installation


  • Escutcheon: Optional Escutcheon Included
  • Flow Rate: 1.20 gpm @ 60 psi, 4.5 L/min @ 414 kPa
  • Spout Height: 6-3/8"
  • Spout Length: 5-3/16"
  • Fittings Type: 3/8" compression fittings
  • Drain Type: Metal pop-up
  • Deck Thickness: 2.25"
  • Supply Lines: 32" minimum InnoFlex® supply lines below the deck included
  • Valve Type: Ceramic valve
Rated 5 out of 5 by from Very nice faucet Modern look and good quality. I like the fact that it’s s gentle waterfall. No splashing. Nice faucet at good price
Date published: 2018-06-04
Rated 5 out of 5 by from love it Its hard to assess a bathroom faucet on the basis of function. They all work fine.The reason I choose it was its design. The waterfall design is novel and perfectly complements our modern house. Somewhat over priced compared to other higher end faucets, but its something we use everyday and will likely be there after we are gone.
Date published: 2018-03-11
Rated 3 out of 5 by from Fair at best I ordered two of these faucets to be placed in identical sinks. One operates perfectly with water turned on completely. The second one splashes water on the user even with the water slightly on. I have checked every detail on the sinks and they are 100% identical. The only explanation is a faulty faucet.
Date published: 2017-12-18
Rated 4 out of 5 by from Ara 1.2 GOM Single HoleWaterfall Bathroom Faucet I purchased this item because I loved the sleek and modern look the faucet and it fits nicely with my bathroom design. I am overall satisfied with the purchase with only 1 issue of a bit coloring in the spout.. I get a lot of complements from my guests as they like the how it functions.
Date published: 2017-12-09
Rated 1 out of 5 by from The water flow is awefule I think a ten dollar faucet would have been better. We have had this 8 months and we have no water at all. No one carries a cartage. What a price of garbage. If I had a way I would get my money. Yes it looks good but heck if it works.
Date published: 2017-12-03
Rated 2 out of 5 by from Finish Problems with this Model After 6 months, this faucet had developed two patches where the finish has rubbed off. Looks terrible. Have reached out to Delta to see what options are available to us. I can't imagine what the faucets will look like over a year's time.
Date published: 2017-03-17
  • y_2018, m_6, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_568LF-MPU, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 19ms
  • REVIEWS, PRODUCT

Hi I have purchased one of your faucets online and I was wondering if you can you please tell me the hole cut size for this faucet so my fabricator can get it cut out for me. Thanks Kevin

Asked by: Kevin Paul Designs
Hi Kevin Paul Designs, Thank you for your inquiry! The Delta Ara Lavatory 568LF-MPU faucet requires a hole of 1 1/8"-1 1/2" (29-38 mm). https://media.deltafaucet.com/SpecSheet/DSP-L-568LF-MPU%20Rev%20E.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2018-05-15

Had a Ara faucet installed in November, water flow was very little and getting worse, help

Asked by: Rosie 123
Hi, Rosie 123! Thank you for your question and I am sorry to hear that you are experiencing low flow from your Delta faucet. We do recommend to flush the valve to make sure no debris is causing the low flow. To flush, first turn off the water supply to the faucet.           1. Remove the handle. On the lever handle, you should find a small hex screw that can be loosened with a 3/32" Allen wrench. The handle will lift off when this screw is loose enough.           2. Once the handle has been removed, unscrew the dome-shaped cap. The domed shaped cap will unscrew counter-clockwise.            3. Once the cap has been removed, grasp the round metal stem. The valve cartridge will pull straight out. Also remove the flow restrictor and rinse these parts. You will need to reinstall these parts later, so be sure to note how they are positioned in the valve.      4. Now, with the valve completely disassembled, place a bucket upside down over the top of the empty brass valve body. Turn the hot and cold water supplies back on and let the water run for about 10 to 15 seconds. The water will come directly up out of the valve and should mostly be deflected back into the sink by the bucket. You might have a little bit of water to clean up, though!           5. Shut off the water supplies. Reinstall all parts. If the flow is not better, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-05-10

We want brushed nickel finish...what do you suggest that is similar

Asked by: Darlene
Hi there, Darlene! Thank you for your question. The Delta Ara Lavatory 568LF-SSMPU in the Brilliance Stainless Steel finish would be the closest finish color to a Brushed Nickel. Best regards, Tanya
Answered by: Tanya
Date published: 2018-04-24

What is the hole size I need for this one hole faucet 568LF-MPU?

Asked by: G Man
Hello! Thank you for your question. The hole size for the 568LF-MPU faucet is 1 1/8"-1 1/2". You can find this measurement and more here: https://media.deltafaucet.com/SpecSheet/DSP-L-568LF-MPU%20Rev%20E.pdf Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-23

What soap dispenser would best match the 568LF-SSMPU Ara Lavatory Faucet?

Asked by: George
Dear George, Thank you for your question. The Delta Ara Lavatory 568LF-SSMPU faucet does not have a matching soap designed for a bathroom installation. The 75055-SS is the only Lavatory Soap/Lotion Dispenser we make. https://www.deltafaucet.com/bathroom/product/75055-SS Best regards, Tanya
Answered by: Tanya
Date published: 2017-07-26

Can you remove the Red/Blue water temp indicators?

If so does it leave pits or any noticeable traits behind.
Asked by: ra89
Dear Ra89, Thank you for your inquiry! The red and blue indicators on the Delta Ara Lavatory 568LF-MPU faucet can not be removed from the faucet handle. Best regards, Tanya
Answered by: Tanya
Date published: 2017-06-26

How to lift the sink stopper using this faucet?

Asked by: Yg
Hi, Yg, Thank you for your question! The lift rod is in the back of the spout assembly for this faucet can be raised straight up from the spout. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-01-06

Is it normal for water to always be sitting in the trough when faucet is not in use?

Doing a bathroom remodel and just had this faucet put in. After the water is turned off, the front 2/3 of the trough has water remaining in it - which would mean there would always be water setting in the trough. Is this the way it is supposed to be or is the trough supposed to be slanted slightly downwards so that the water completely drains from it? Will water constantly sitting in the trough negatively affect the stainless steel over time? (I have used other trough faucets and never noticed water remaining in the trough.) Please let me know right away as l only have my contractor for 2 more days. Thanks!
Asked by: Andy
Hi, Andy! Thank you for your question. Water remaining in the spout trough is normal. Dry off with a dry towel as needed. For cleaning, use a 50% white vinegar and 50% water solution and clean off any build up as needed, if any. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2016-10-06
  • y_2018, m_6, d_17, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_568LF-MPU, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 26ms
  • QUESTIONS, PRODUCT