Finish: Matte Black
List Price*: $62.90
Complete the look of your bath with this Trinsic Tissue Holder. Delta makes installation a breeze for the weekend DIYer by including all mounting hardware and easy-to-understand installation instructions. Matte Black makes a statement in your space, cultivating a sophisticated air and coordinating flawlessly with most other fixtures and accents. With bright tones, Matte Black is undeniably modern with a strong contrast, but it can complement traditional or transitional spaces just as well when paired against warm nuetrals for a rustic feel akin to cast iron. You can install with confidence, knowing that Delta backs its bath hardware with a Lifetime Limited Warranty.
- Perfectly coordinates with the Trinsic bath collection
- Extends 3-5/16 in. from wall
- Tile/masonry-plastic or lead anchors plaster/drywall-toggle bolts recommend if wood blocking is not available
- Mounting hardware and mounting template included with product
Product Support, Repair Parts & Technical Specifications
Over All Height :
Connection Type :
Rated 5 out of 5 by Margie from Great toilet paper holder Love the look and the paper stays on b/c of the little hook at the end
Date published: 2020-12-07
Rated 1 out of 5 by perryj from TOILET TISSUE ROLL falls off. This is a case of poor product design. The tiny nub intended to keep the tissue roll from falling off is inadequate to the task. I've had numerous tissue rolls fall into the toilet after giving the paper a gentle yank.
Date published: 2020-08-04
Rated 1 out of 5 by Steve from No set screw Horrible design. Won’t stay straight because there is no set screw. The spec diagram is incorrect.
Date published: 2020-04-22
Rated 3 out of 5 by Jj0000 from Nice hardware but won't stay straight I had installer can and installed multiple things in the bathroom including this toilet paper holder. Just a couple later it became lose and won't stay straight any more and I have no idea how to take it off to fix it. There isnt any apparent screws to tighten or obvious ways to remove. Not sure what to do with this wobbly toilet paper holder now
Date published: 2019-08-16
Rated 3 out of 5 by Robert from Length of pin on end of tissue bar? I believe the pin at the end of the tissue bar should be longer to help hold the tissue roll on the bar more securely.
Date published: 2019-02-10
Rated 1 out of 5 by Scott22 from Missing Set Screw Package was missing the set screw
Date published: 2018-12-27
Rated 5 out of 5 by Whitlo86 from Awesome Strong little paper roll. I thought this might be kind of cheap and jiggle around but it doesn’t. No issues with the toilet paper sliding off like other reviews. I bought matte black which is really nice.
Date published: 2018-11-27
Rated 1 out of 5 by QuintinB from Does not stay straight With only 1 wall mount it over time, 1 day, twisted loose. I had to replace the screws with full anchors or move the dispenser to a stud location.
Date published: 2018-11-18
- bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
- CLOUD, getReviews, 6ms
- reviews, product
We found Toilet Paper holder 75950-BL seems to have come with out the set screw in the bottom. Could you please tell me the dimensions of the required set screw.
Hello Lance, Thank you for your question regarding the Delta Tissue Holder and I am happy to assist you today. This product is manufactured by our sister company, Liberty Hardware, who manufactures Delta branded accessories. Please call their warranty and technical support line at 800-542-3789 and they will be happy to assist you with obtaining this information. If there is anything going forward that we may be able to help with, please do not hesitate to give us a call on our warranty line at 800-345-3358 and we will be happy to help you where we can. Thank you, Brandy
Date published: 2021-01-14
Can this tissue holder be purchased pointing right or left? thanks, Estelle
Hi, Estelle! Thank you for your question. At this time, the Delta 75950-SS Toilet Tissue Holder is only available with the arm pointing to the right. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Date published: 2020-03-24
I can't find the set screw to remove the holder. I need to tighten the assembly, it spins around.
I have a new house that had the trinsic tissue holders installed. They installed them upside down, and also, they are loose, so I need to rehang them. I can't find a set screw so that I can remove the handle to get at the mounting bracket.
The set screw goes directly under the post. There should be a small opening for it. If the set screw is missing, please contact customer care for a replacement. Regards, emccollum
Date published: 2017-01-14
Can the Tissue Holder be installed to face the opposite way ?
As per your photo, the bar that holds the paper roll goes to the right. Cant his fixture be installed so the bar goes to the left ?
Thank you for your question. Delta Faucet model # 79590-SS is not recommended to be switched to the other side. There is a notch to keep the tissue on and it would be pointing down. Also the set screw would be showing if you flipped the bar.
Date published: 2013-10-22
My contractor installed this unit upside down, and it is located in a position that would be wrong if flipped. Is there a way to turn the bar so the pin that keeps the paper roll on points the other direction?
Hello, Mason17. Thank you for your question! Unfortunately, this unit is not designed to be installed upside down and the bar cannot be adjusted to move the pin around. Best regards, Jon
Date published: 2018-10-30
can trinsic tissue holder be mounted vertically??
Hi Betsy, Thank you for your question. Delta Faucet model # 75950-SS is not recommended to be mounted vertically as the set screw will not be in the right place. It is also a possibility that the tissue will come off the roll incorrectly if it is mounted vertically. Thanks. Jody
Date published: 2014-12-27
My holder keeps coming loose...how can I tighten it? Do I have to take it off completely? and if so, how do I do that?
Hello isabelle, Thank you for your question regarding the Delta Trinsic® Tissue Holder and I am happy to help you today. You will need to loosen the set screw from beneath bottom of the post of the tissue paper holder and remove it in order to tighten the screws that are behind the post holding the bracket in place. Once the bracket is firmly screwed back onto the wall you will need to insert the set screw back into the post. I hope this helps and please do not hesitate to give us a call on our warranty line at 800-345-3358 if we can assist you with anything going forward. Thank you, Brandy
Date published: 2018-07-06
I see the Trinsic faucet is a stainless finish and the coordinating items are brilliance stainless. Do they match or not?
Hi, Q! Thank you for your question. All of the coordinating accessories, including the 75950-SS tissue holder, are the same Brilliance Stainless Steel finish. Best Regards, Rosanna
Date published: 2017-10-13
- bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
- CLOUD, getContent, 57ms
- questions, product
Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.