Tissue Holder in Chrome

Model#: 79450
Tissue Holder in Chrome
Model#: 79450
List Price: $5620
PRODUCT FEATURES
Complete the look of your bath with this Linden Toilet Tissue Holder. Delta makes installation a breeze for the weekend DIYer by including all mounting hardware and easy-to-understand installation instructions. You can install with confidence, knowing that Delta backs its bath hardware with a Lifetime Limited Warranty.
  • Perfectly coordinates with the Linden bath collection
  • Extends 3-5/8 in. from wall
  • Tile/masonry-plastic or lead anchors plaster/drywall-toggle bolts recommend if wood blocking is not available
  • Mounting hardware and mounting template included with product
  • Assembled dimensions: 2-1/2 in. H x 3-5/8 in. D x 9-7/16 in. W
Documents & Specs
Installation Information
Overall Height (in.) :
2-1/2
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from Avoid. Incredible cheaply made, especially for the price. The pivoting mechanism is plastic and extremely rigid. They couldn't even bother to make the part where the toilet paper goes a full cylinder. Will be returning.
Date published: 2024-12-01
Rated 1 out of 5 by from Finish and Function Subpar The toilet paper holder and towel bar were off on the finish to my Cassidy faucet. Didn't bother breaking the towel bar out of the box. The toilet paper holder bar does not stay locked in place and will rattle if when you pull down on the paper roll. Very annoying! Took it off the wall and searching for a replacement.
Date published: 2023-11-10
Rated 1 out of 5 by from Does NOT match towel holder of same line This was disappointing… ordered both the towel holder and the toilet paper holder and they were delivered separately. The finish on the toilet paper holder is so much lighter! Obviously a different lot or made at a different plant. Has to go back.
Date published: 2023-04-05
Rated 5 out of 5 by from Very pleased Love the pivot. So easy to replace TP! Champagne bronze looks lovely.
Date published: 2022-11-27
Rated 1 out of 5 by from Total Junk Bath contractor installed this a part of total remodel. What a poorly designed fixture. Depending on the way you pull the toilet tissue off the center bar becomes dislodged as pictured. There appear to be holes in the casting that might have been designed to secure a latch of some type. That I s way this fixture needs. If I could find a fixture that came close to matching I would deep six this one in a minute. I recommend finding a dispenser with the spring loaded roller in traditional fashion.
Date published: 2022-06-17
Rated 5 out of 5 by from TP Holder Perfect finish for old world bathroom
Date published: 2022-04-22
Rated 1 out of 5 by from Delta Linden Tissue Holder We bought 3 of these tissue holders for our new home approximately 5 years ago. Two of them have fallen apart. I replaced one about 18 months ago, and I'll have to replace the other even though I know it won't last. Wish Delta would fix the issue with this tissue holder or offer another more sturdy Delta tissue holder. I like all my towel bars, etc., to match.
Date published: 2021-10-18
Rated 5 out of 5 by from Very nice Attractive toilet tissue holders. Purchased the Champagne bronze finish and it's very attractive.
Date published: 2021-07-03
  • y_2026, m_8, d_30, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_en_US, sid_79450, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Q&A

What is the thread type and length of the set screw for the Linden 79450 tissue holder?

Asked by: Orchid
Thank you for your question, Orchid! The mounting set screw which is included in the RP100083 kit is a # 8 32" x 3/8" thread. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

The pivot point for the tissue arm has a plastic sleeve to hold it in place, where can I get more of these sleeves? Model 79450

Asked by: Brian
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-11-14

Does this toilet tissue holder flip up to change the toilet tissue? If not what other Delta product does that would coordinate with the Linden series?

Asked by: Sharon
Thank you for your question. Delta Faucet model # 79450 will pivot up and down to change the toilet tissue.
Answered by: Delta
Date published: 2024-03-28

Why doesn't the link to the spec sheet work?

I want to move the paper holder and I cannot figure out how to release it. I hoped to learn by looking at the spec sheet, but that takes me to "not found." https://media.deltafaucet.com/SpecSheet/DSHB193-XXX_Rev_A.pdf Can you tell me how to release the holder?
Asked by: Tara
Use a very thin Allen wrench and you really have to put it far into the hole.
Answered by: Tara
Date published: 2024-03-28

Where can I find a replacement for the little plastic sleeve that holds the pivoting arm in place - I can’t find the part number or access the spec sheet on the web

Asked by: Milton
Hello Milton, Thank you for your question on the Delta Linden Tissue Holder. I will be happy to assist you today. I am sorry to hear that you need a replacement plastic sleeve for your unit and I apologize for any inconvenience it may have caused. Unfortunately, at this time we do not have a replacement part for the plastic sleeve on this unit. A full replacement will have to be ordered. Please refer to the email that I have sent to you regarding this matter or, if you would rather discuss this over the phone, feel free to give us a call on our warranty line at 800-345-3358 and we will be happy to assist you in any way that we can. Thank you, Matthew Delta Faucet Company Consumer Care
Answered by: Consumer Care
Date published: 2024-03-28

Is it possible to order a replacement arm to this tissue holder?

Asked by: Keri
Thank you for your question, Keri! Unfortunately there are no repair parts available for this tissue holder and replacement holder will be needed. This product is manufactured by our sister company, Liberty Hardware, who manufactures Delta branded accessories. We suggest first contacting their warranty line at 800-542-3789 for further possible options. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does this toilet tissue holder pivot?

My builder indicated he thought this was the old fashioned spring load type of holder. Please confirm if this holder pivots or is spring load.
Asked by: Shelley Coffe
Yes, the center holder bar is attached and pivots up.
Answered by: jenmomofthree
Date published: 2024-03-28

Can this be mounted onto the side of a wooden cabinet/vanity?

Asked by: Applebreze
Hello Applebreze, Thank you for your review on the Linden Toilet Tissue Holder. I will be more than happy to assist you. Yes, you may mount this to your wooden cabinet. If you need anything further please contact us by calling 800-345-3358. Thanks, Sarah
Answered by: Sarah
Date published: 2017-09-16
  • y_2026, m_8, d_30, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_79450, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 23ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.