DELTA
Single Handle Tub and Shower
Model#: B114900C-SS
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
Single Handle Tub and Shower
DELTA
Single Handle Tub and Shower
Model#: B114900C-SS
Finish: Stainless
List Price*: $214.40
PRODUCT FEATURES
  • Backed by Delta Faucet’s Lifetime Limited Warranty
Eco-Friendly
WatersenseCert
Special Features
ADA Compliant
ADA Compliant
California Prop 65 WARNING
SUPPORT
Product Support, Repair Parts & Technical Specifications
REVIEWS
Rated 5 out of 5 by from Good Faucet Good quality nice features
Date published: 2020-09-24
Rated 5 out of 5 by from Works well and is guaranteed for life. Two of my bathroom diverters were shot so I bought two of these Delta ones. Easy installation using Pex.
Date published: 2020-09-13
Rated 4 out of 5 by from Nice Faucets I bought faucets for a shower and the second for bath/shower. The water pressure seems to be slightly less than than the previous very old two handled faucets. Might I suggest some markings for Hot & Cold and an arrow on the handle. Finally got used to these and am okay
Date published: 2020-09-12
Rated 4 out of 5 by from Great look Bought this and love the look, just wish it was metal and not plastic. Not built like the old days
Date published: 2020-07-21
Rated 5 out of 5 by from Prompt sending of replacement parts Dont like the fact I had to replace parts after Inly 6 months but they were friendly and prompt with new parts. Works like new!
Date published: 2020-07-14
Rated 5 out of 5 by from Fantastic look! I bought this for my new bathroom and I love the look it added
Date published: 2019-06-25
Rated 4 out of 5 by from Regular sso far everything is good
Date published: 2019-05-29
Rated 5 out of 5 by from Great product I both this Delta single handle bathtub shower at Hone Depot, and i am watching the master plummer who installed it, and i was told by him that i picked the Best of all kinds of shower because its easy to installed & it is a life time warranty., both of us are so happy that it is easy to use and perform well, if ever i need another speaket on my other bathroom , i will surely purchase ONLY DELTA Brand
Date published: 2019-02-07
  • y_2021, m_1, d_21, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_B114900C-SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 11ms
  • reviews, product
Q&A

How too install 

Asked by: Ivan
Thank you for your question, Ivan! The instructions for installing model B114900C-SS can be found in the link below. Please feel free to contact us directly if you have questions or need further assistance. https://media.deltafaucet.com/MandI/101649%20Rev%20C.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2020-03-01

Can I replace my B114900C tub/shower trim with a T17038. Will the valve I have in the wall now accommodate the new cartridge ?

Asked by: Maggiem
Hi, Maggiem. Thank you for your question. Unfortunately, the Delta Monitor T17038 Trim Kit will not fit the Delta B114900C Valve. The Monitor T17038 Trim Kit will need to be installed on the Delta MultiChoice Universal R10000 Rough Valve Body. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2020-05-31

i installed a B114900C Delta Foundation Faucet in a shower. The water temperature is not hot enough even when the lever is turned all the way, Is there some way to adjust the mix so more hot water is in the mix.

Asked by: JayP
Hello JayP, Thank you for your question! In order to adjust the temperature of the Delta Foundations Tub and Shower B114900C model, you would need to adjust the Rotational Limit Stop, that goes over the stem of the cartridge. I have outline a step by step process, below: 1. Please shut off your water, you shouldn't have to do this if you are not removing anything but the handle. 2. After removing your handle, you will see a brass stem, with a blue cap held on by a black o-ring. 3. Remove this o-ring. 4. After you remove the o-ring, you are now able to adjust your "RLS". All you have to do is lift it up just a little bit, rotate counter clockwise. Please keep in mind there is a limit on how far you can rotate this, if you rotate too far it will not attach properly. Also, please keep in mind if you rotate this all the way to the maximum, this can result in very hot water as this would be the maximum temperature off of your water heater. 5. Once you are done rotating your "RLS", please attach your o-ring and your handle. 6. Test the temperature, if you are still having issues please advise. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2019-10-28

how to adjust temperature

Asked by: Daniel
Thank you for your question, Daniel! In order to adjust the temperature, you would need to adjust the Rotational Limit Stop, that goes over the stem of the cartridge. I have outline a step by step process, below: 1. Please shut off your water, you shouldn't have to do this if you are not removing anything but the handle. 2. After removing your handle, you will see a brass stem, with a blue cap held on by a black o-ring. 3. Remove this o-ring. 4. After you remove the o-ring, you are now able to adjust your "RLS". All you have to do is lift it up just a little bit, rotate counter clockwise. Please keep in mind there is a limit on how far you can rotate this, if you rotate too far it will not attach properly. Also, please keep in mind if you rotate this all the way to the maximum, this can result in very hot water as this would be the maximum temperature off of your water heater. 5. Once you are done rotating your "RLS", please attach your o-ring and your handle. 6. Test the temperature, if you are still having issues please advise. Please contact us directly, if you have any questions or need further assistance. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2019-10-23

 Plumber installed valve that was included in the Foundations shower  #B114900C.  I had ordered the Victorian Shower and told him that the valve for this was the R10000-UNBX.  Will the Victorian shower assembly work with the Foundations Valve???

Asked by: Not trusting my Plumber
Thank you for your question. The Delta trim B114900C is designed to work with the included valve body. The Victorian shower trim is intended to be installed with an R10000 Multichoice valve. Best regards, Edward
Answered by: Delta Faucet
Date published: 2020-05-27

I need a valve stem extension for this unit. Installed shower walls and now the stem is too short, original part comes with an extension already but it’s too small now, about an inch longer

Asked by: Sam Solomon
Hi, Sam. Thank you for your question. Unfortunately, we do not make an extension kit to extend the stem further out of the finished wall for the Delta B114900C Valve Trim Kit. We recommend to make sure and measure the distance from the stringer of the valve body to the front of the plasterguard is 2 3/4" ± 1/4" (70 mm ± 6 mm). This is the same distance to the finished wall. If this is further back inside of the wall, adjustments will have to be made accordingly. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2020-05-13

I am looking for a matte black product that will fit the B114900C valve body. Can you send me Options?

Asked by: Rayr
Hi, Rayr! Thank you for your question. At this time, we do not make a trim kit to fit the valve body for the B114900C Faucet in a Matte Black Finish. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2020-04-25

I want to replace a monitor 1700 series from the brass trim kit to a chrome. Will this fit my current installation?

Asked by: Bobb
Thank you for your question, Bobb! The Delta Foundations Tub and Shower B114900C model includes the necessary rough-in valve. If you are planning on replacing this model with another single handle trim, our T17 Trim kits will require an old 17 Series valve or our R10000-UNBX universal MultiChoice valve which is usually sold separately from the shower trim. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2019-11-20
  • y_2021, m_1, d_21, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_B114900C-SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 65ms
  • questions, product
Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
BiltLogo IntelligentInstructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instatuctions.

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.