Two Handle Centerset Bathroom Faucet in Chrome

Hi Anonymous, The aerator on our B2514LF-PPU-ECO should rotate counterclockwise to remove. Sincerely, Kyra Digital Communications Specialist

Hi Cheetahs, Thank you for your question about the Delta Faucet model B2514LF-PPU-ECO. I am sorry this information was not readily available, and I am happy to help! The replacement aerator RP61340-1.2 has a thread size of 15/16"-27 male. The 1.5 GPM RP19754 has the same size thread. https://www.deltafaucet.com/parts/product/RP19754.html Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Presencia, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Faucet Foundations® Two Handle Centerset Bathroom Faucet In Chrome MODEL#: B2514LF-PPU-ECO. Here is what we can do to resolve your issue for you. The aerator for your faucet is no longer available, however, we have a recommended aerator part number RP61340-1.2. Please see the link below. https://www.deltafaucet.com/parts/product/RP61340-1.2.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Gary, Thank you for your question regarding Delta Faucet B2514LF-PPU-ECO! We apologize this information was not readily available to you, we are happy to assist you! Please verify if the hot and cold water are both turned on completely. Please refer to the flushing instructions below. 1. Remove the set screws on the side of your handles with your 3/32" Allen wrench. If you have a knob handle, you will need to remove the button on the top, grab a Philips screwdriver to remove the screw, and pull the handle off. 2. With the wrench, unscrew the bonnet nuts counter-clockwise to remove them. 3. You should see the "stems" with unremovable two-quarter pieces that fit around the stem unit. 4. Next would be to remove the stems and the seats and springs. We recommend flushing the unit before installing new parts. I will provide directions below. 1. Please place a towel around the backside of the faucet. 2. Place the bucket over the top of the towel, and have someone hold the bucket. 3. Turn on water supplies and flush the water for about 30 seconds to a minute. 4. Shut off water supplies and proceed to put the new parts in. We appreciate your inquiry and look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

Hello Chuck! Thank you for your question and we are happy to help! We are sorry to hear that your Delta faucet is leaking. To remove the handles of the B2514LF-PPU-ECO, you will need to use a 1/8th Allen wrench to first take out the set screw. You will then remove the handles by pulling them up. You will use a crescent wrench to remove the bonnet nuts and from there you can take out the stem units and the seats and springs to replace them. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi ESR1, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Centerset Bathroom Faucet MODEL#: B2511LF-PPU-12 is sold by the dozen while the FOUNDATIONS® Centerset Bathroom Faucet MODEL#: B2511LF-PPU-ECO is sold individually. The faucets otherwise are the same! Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! All measurements for our units can be found in our technical specifications. The link can be found by going to the documents and specs tab or by going to the following link. Please reach out with further questions. https://media.deltafaucet.com/SpecSheet/DSP-L-B2511LF-PPU%20Rev%20F.pdf Best Regards, Kayla