Single Handle Centerset Bathroom Faucet in Chrome

Hello Customer! Thank you for your question and we are happy to help. The Delta B501L aerator is RP61340 and can be removed with a crescent wrench. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Kathy, Thank you for your question about the Delta Faucet model B501LF. A replacement aerator for the end of the spout is available as RP61340-1.2. https://www.deltafaucet.com/parts/product/RP61340-1.2.html Please reach out with any additional questions! Best Regards, Bryan

Hello! Thank you for contacting Delta Faucet Company! The aerator for our B501LF is the RP61340. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Mark16285, Thank you for your question about the Delta Faucet model B501LF. I am sorry this information was not readily available, and I am happy to help! An issue with the flow rate is likely caused by water debris trapped in the faucet or supply lines. First, check the flow with the aerator removed. Next, flush the faucet with the handle, ball, seats, and springs removed. Use a bucket over the faucet to redirect the water down into the sink. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta B501LF uses the RP44123 repair kit. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Railfan2007, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with your Delta Faucet Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B501LF. Here is what we can do to resolve your issue for you. If the set screw in your handle is stripped, there are a few ways it can be removed. First, I would advise on soaking a rag in a 50/50 solution of white vinegar and water and wrapping the rag around the handle covering the set screw. This should help loosen the screw, however if that does not work than using a rubber band to help grip the set screw on removal. Lastly, if this does not work than you would need to drill the set screw out, which could damage the handle, and it would need replaced. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi 851OLFPPU12, thank you for your interest in the B501LF! The faucet contains seats and springs and a ball. Please view the parts break down in the link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-B501LF%20Rev%20B.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist

Good morning donald! Thank you for your question! I am happy to help you. The maximum recommended flow rate for this faucet is 60 PSI of pressure. Please contact us back for any further questions. Best Regards, Frank

Hi fred, thank you for contacting Delta Faucet Company! To replace the internal parts, please refer to the instructions below. Please gather a towel, a large bowl, an 1/8" inch allen wrench for a lever handle and a Phillips screwdriver for a knob handle, and a strap wrench. 1. Please shut off water supplies. 2. If you have a lever handle with a red and blue hot/cold button, pry it off with a non-metal object to expose the set screw. A library card works well. 3. Loosen the set screw with a 1/8" hex wrench or Philips screwdriver. 5. Unscrew the trim cap counterclockwise and lift off. 6. Remove the bonnet nut with a strap wrench by turning it counterclockwise. 7. Remove the internal parts. 8. Place the towel around the back side of the faucet, put the bucket or bowl on top of the towel making sure the faucet is covered as well, and have someone else turn the hot and cold water on for about a minute. This will flush out any excess debris in the water lines. Once you are finished, you can install the new parts! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Katy, Thank you for your question about the Delta Faucet B501LF. A replacement RP61340-1.2 aerator is available on our website or through authorized dealers. https://www.deltafaucet.com/parts/product/RP61340-1.2.html Please reach out with any additional questions! Best Regards, Bryan

Hi Mike, Thank you for your question about the Delta Faucet model B510LF-PPU-ECO Foundations® Single Handle Centerset Bathroom Faucet In Chrome. We will be happy to assist you as quickly as possible. This faucet has 9/16-24 UNEF threaded female adapter nuts for a 3/8" compression fitting outlet. The RP63263 adapter kit converts to 1/2"-20 UN or 1/2"-14 NPSM. If another thread size is needed, we recommend looking for an adapter locally. https://www.deltafaucet.com/parts/product/RP63263.html Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Victor, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing with our Delta Faucet Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B501LF. Here is what we can do to resolve your issue for you. We would recommend taking a rag and soaking it in a 50/50 mixture of white vinegar and water solution, then wrapping it around the handle and soaking it for 20 minutes. This will help break up any debris or build-up that is holding the handle on the stem. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Kate, Thank you for contacting us, I would be happy to help you. The handle is held on by a screw putting pressure against the stem, We would recommend tightening the set screw. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Carole, Thank you for contacting Delta Faucet Company! I see you have been assisted by one of our customer service representative. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Brent, thank you for contacting Delta Faucet Company! No, if you are needing to adjust your temperature, please refer to the water heater in your home. We appreciate your inquiry. Please reach out directly if you have any questions! Best Regards, Kyra Digital Communications Specialist

Hi Carole, Thanks so much for contacting Delta Faucet Company! The aerator on model B501LF is just threaded onto the spout, there is no special tool needed. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Fred, thank you for your interest in the B501LF! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist