Single Handle Centerset Bathroom Faucet in Chrome

Thank you for your question, ukasaka! We recommend silicone for various reasons, the most notable being that plumbers putty will eventually dry up over time, causing potential leak points whereas silicone does not. We would recommend un-installing the drain assembly and using silicone as any leaks due to improper installation methods can not be covered under the warranty. Best regards, Edward

Hi, JoeN! Thank you for your question. The Delta B510LF-PPU-ECO Faucet has a Lifetime Limited Warranty on finish and parts from manufacturer's defects for residential settings and 5 years for commercial settings. Here is a link to the warranty information: https://www.deltafaucet.com/service-parts/warranty Best Regards, Rosanna

Thank you for your question, Lees! We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Best regards, Jon

Hello Jordan, Thank you for your question regarding the Delta Faucet Model B510Lf-PPU-ECO! I am happy to help. The aerator for this faucet does not require a special tool to be removed. It simply unthreads from the spout. Please reach out to us directly if you need further assistance. Best Regards, Antoine

Thank you for reaching out, Carol! Based on the photo, the screen has been removed from the aerator. However, the entire aerator will unscrew from the end of the spout. If it seems stuck, please try soaking it using a rag with a 50/50 white vinegar and water solution for about 15 minutes, then rinse and wipe with a soft cloth. This will help dissolve mineral buildup. Best regards, Jon

Hello Mike, Thank you for your question. We recommend using a rubber strap wrench or rubber jar opener to unscrew the dome shaped cap assembly, under the handle of the Foundations Lavatory B510LF-PPU-ECO faucet. Best regards, Tanya

Hi, ZmansDaddy! Thank you for your question. The aerator assembly on the Delta B510LF-SSPPU-ECO Faucet can be removed by unscrewing the aerator from the spout assembly counterclockwise by hand. No special tool is required. Best Regards, Rosanna

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Thank you for your question, Russ! The handle for model B510LF-SSPPU-ECO is held on with a 3/32" (2.38mm) set screw located just under the red/blue indicator button. https://media.deltafaucet.com/PartsDiagram/DPD-L-B501LF.pdf Best regards, Edward

Hi, Bob A! Thank you for your question. The Delta B510LF-SSPPU-ECO Faucet is lead free. The 'LF' in the model number indicates 'Lead Free'. Best Regards, Rosanna

Thank you for your question, Cindy! The aerator can be unscrewed by hand. Best regards, Jon

Hello, Thank you for your question! Please see the following link for the RP26533SS drain assembly. https://www.deltafaucet.com/parts/product/RP26533SS.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Pick1944, thank you for contacting us at Delta Faucet. I apologize for the issue you are experiencing but am happy to help you. Unfortunately, at this time we do not currently offer an aerator with a higher flow rate for this Delta Faucet Foundations lavatory faucet model B510LF. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  Best Regards, Tim

Hello Robin! Thank you for contacting us at Delta Faucet! I will be happy to help! The depth of the base is 2 1/8" measured from front to back. Please see the following tech spec sheet for more information. https://media.deltafaucet.com/SpecSheet/DSP-L-B501LF%20Rev%20G.pdf Best Regards, Tim

Good morning Capital D, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B510LF-PPU-ECO does come in stainless. The model number is MODEL#: B510LF-SSPPU-ECO, here is the link. https://www.deltafaucet.com/bathroom/product/B510LF-SSPPU-ECO.html Thank you for being a loyal Delta customer. Please contact us back with any further questions. Best Regards, Themar

Hi Mickey, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. I have included a link to our Delta Faucet Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B510LF-PPU-ECO parts diagram, please see the link below. https://media.deltafaucet.com/PartsDiagram/DPD-L-B501LF.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi jvnase, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B510LF-PPU-ECO hot and cold can not be reversed without switching the lines. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello darbypa, Thank you for contacting us. I am sorry this information is not readily available and I would be happy to help you. Usually if there is a issue with the temperature its caused by debris, hot water heater or un equal hot and cold pressure. I would first advise to turn the hot water heater to 120 or lower, then do a full flush of the faucet, and when you get ready turn both hot and cold water on equally. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Wilbo, Thank you for your question about the Delta Faucet model B510LF-PPU-ECO FOUNDATIONS® Single Handle Centerset Bathroom Faucet. I apologize for any difficulty finding this information. We are happy to help! No, the supply lines are not included with this model. Please see the faucet manual for more information: https://media.deltafaucet.com/MandI/86607%20Rev%20C.pdf Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi beachcat4573, Thank you for your question about the Delta Faucet model B510LF-PPU-ECO. Please accept our apologies for the inconvenience you are experiencing with a drip. We are happy to help! Flushing the faucet with the aerator removed can remove trapped debris causing the issue. If the drip remains, a repair kit is available as part number RP44123. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Suzie, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B510LF-PPU-ECO has a plastic pop-up assembly. Model B510LF has a metal pop-up assembly. 8510lf is not a model number. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hi tucsonmac, Thank you for your question about the Delta Faucet model B510LF-PPU-ECO. This faucet model has a maximum flow rate of 1.2 gallons per minute, which may be lower than the previous faucet. To troubleshoot an issue with the flow, I recommend unscrewing the aerator from the spout, cleaning the aerator, and running the water for a minute to flush the faucet before reinstalling the aerator. See here for more information: https://support.deltafaucet.com/s/article/Why-does-my-faucet-have-low-water-pressure-1628028366405 Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Nhuan, Thank you for your question. We are happy to help! We do not recommend using lubricants in the faucet valve. If the handle is tight, the adjusting ring on the cap under the handle can be loosened. Loosening the ring too far can cause a leak under the handle. If the issue remains, replace parts with repair kit RP44123. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hello Mart, Thank you for your question about the Delta Faucet model B510LF-PPU-ECO Foundations® Single Handle Centerset Bathroom Faucet In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! Unfortunately, we do not currently carry a replacement for the red/blue set screw cover. I apologize for any inconvenience. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Good Afternoon mkulter, Thank you for contacting us at Delta Faucet. I apologize for the temperature issue you are experiencing with your Delta Faucet Foundations lavatory faucet model B510LF-PPU-ECO and I am happy to help you. We recommend performing a cross flush of your faucet in order to help resolve the issue you are experiencing. First, you will want to turn the faucet off at the shut-off valves. You will want to then take the inlet line on the hot shut-off valve and switch it with the cold line. Next, you will remove the handle's set screws, the handle and unthread the bonnet from the valve. Next, you will remove the cam assembly, ball assembly, and seats and springs in the valve. Place a towel behind the faucet and a bowl over the empty valve. Next, you will turn the hot and cold valves under the sink back on. This will allow the cold water to flush out the hot port and hot water to flush through the cold port. After flushing for 30 to 60 seconds reinsert the parts, tighten down the bonnet and reassemble the handle and the set screw. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi vrmk, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Foundations® Single Handle Centerset Bathroom Faucet In Chrome MODEL#: B510LF-PPU-ECO only requires the tailpiece to be removed with the metal pop up, since you have the plastic you would skip page 3 and go onto page 4. https://media.deltafaucet.com/MandI/86607%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Thank you for your question, JimM! We recommend that the center of the hole on model B510LF-PPU-ECO, is no less than 2 1/2" from the back wall. I have included a link to the Technical Specifications diagram for model B510LF-PPU-ECO, for you to refer to during the installation. This diagram lists the dimensions, and is included in the box the faucet comes in. https://media.deltafaucet.com/SpecSheet/DSP-L-B501LF%20Rev%20E.pdf Best Regards, Benjamin

Hello, Jstats! Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The tailpiece for our Delta Faucet plastic pop-up drain assembly consists of ABS. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Joe V! Thank you for your question and we are happy to help. We recommend flushing the lines of your faucet. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is.  Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow.   If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines.  Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.  Next, disconnect the hot water supply line and place it inside of a bucket.  Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

I know there aerator unscrews from faucet.  I want to know if you can take the aerator apart (screen) to remove sand partials.  Water flow is being blocked from sand particles in aerator so it needs to be taken apart to clean.