MultiChoice® Universal Tub / Shower Rough - PEX Cold Expansion

Thank you for your question, Tyler. You would need an R11000 diverter valve and a 3-setting trim kit in order to divert between a shower head and rain can shower head. The R11000 valve will be connected to the top port of the R10000. Best regards, Jon

Thank you for your question, David! The difference on these models is solely in the connection for the Inlets in regards to the type being used. Both will feature universal 1/2" connections, however the R1000-PX will have slightly tapered inlets for easier installation. Best regards, Edward

Hi, Doug. Thank you for your question. The R10000-MF is a solid brass valve body. Any type of connection around the valve body in your wall that gets hot will make the valve body hot. Best Regards, Rosanna

Hello Aaron, Thank you for your question. The Delta MultiChoice Universal Rough-In "box" model rough-in valves are single model units and non-box models comes as bulk/case of units. The difference between the High Flow and non high flow valves is that there (non high flow valve) a bottom port for a tub spout installation and the R10000-UNBXHF valve does not include a bottom port for a tub spout installation. The high flow valve are designed for shower only installation. Best regards, Tanya

Thank you for your question. The R10000-MF has 1/2" PEX cold expansion connections and 1/2" universal outlets with male threads. The R10000-PXWS has 1/2" PEX Crimp connections and 1/2" universal outlets with male threads. Best regards, Edward

Hello Lucho1! Thank you for your question and we are happy to help! To troubleshoot your Delta MultiChoice® Universal Tub / Shower Rough - PEX Cold Expansion MODEL#: R10000-MFwe recommend flushing the valves with all new installations. The problem you are describing is most likely the result of debris in your supply lines or faucet. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hi Chad, Thanks so much for contacting Delta Faucet Company! The MultiChoice® Universal Tub / Shower Rough MODEL#: R10000-MF must be ordered in full case quantity of 12. The MultiChoice® Universal Tub / Shower Rough MODEL#: R10000-MFWS has PEX cold expansion with stops and UN Outlets. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Changa, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing with locating this information. We will be happy to assist you. The Delta Faucet MultiChoice® Universal Tub / Shower Rough - PEX Cold Expansion MODEL#: R10000-MF can be installed with PEX lines everywhere except for the tub spout connection. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley