Delta®
MultiChoice® Universal Shower Rough - Prefab PEX Cold Expansion
Model#: R10000-PFS-MF
MultiChoice® Universal Shower Rough - Prefab PEX Cold Expansion
Delta®
MultiChoice® Universal Shower Rough - Prefab PEX Cold Expansion
Model#: R10000-PFS-MF

Finish:Not Applicable

List Price*: $74.45
PRODUCT FEATURES
  • MultiChoice® Universal valve body only
  • Accepts single, dual, or dual thermostatic cartridge
  • Cartridge ships with trim
  • Back-to-back capability
  • Features blocked tub port & PEX shower riser
  • Model must be ordered in full case quantity of 12
Technology
California Prop 65 WARNING
SUPPORT
Installation Information
Over All Height :
4
Connection Type :
1/2" PEX Cold Expansion
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 10ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Can i used this with a T11864

Asked by: Carlos
Thank you for your question, Carlos! The R10000-PFS-MF MultiChoice Universal Rough-In valve is for 13, 14, 17 or 17T Shower or Tub and Shower Trim kits. The R11000 3/6 Setting Diverter valve would be the correct valve needed to install the Delta Ashlyn 3-Setting Diverter T11864. Best regards, Tanya
Answered by: Tanya
Date published: 2018-01-23

Hi Can the brass plug on the R10000-PFS-MF where a tub spout would connect be un-sweated? Thanks Brian

Asked by: Brian
Hi, Brian! Thank you for your question. The brass plug on the bottom port of the Delta MultiChoice Universal R10000-PFS-MF Rough Valve Body can be unsweated for a tub spout application. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2020-04-14

How does this valve operate? Does it only rotate to turn on (full) and adjust temperature, or can it pull up for varied flow and rotate for temp?

Asked by: Kenneth
Thank you for your question! This valve will work with any of our 13/14, 17, or 17T Series trim kits. The 17 and 17T Series have dual controls that allow you to adjust the temperature separately. Best regards, Jon
Answered by: Delta Faucet
Date published: 2019-08-10

RP32104 vs R10000 - Interchangeable?

I have an older Monitor 17 Series, which came with the RP32104 style rough in kit. I'd like to retain the rough but replace with a newer Monitor 17 Trim Kit. Will the new trim kits fit the old style rough in, or does it all need to be replaced? Any guidance will be appreciated! Thanks!
Asked by: BCinAP
Hello BCinAP, Thank you for your inquiry! As long as the screw holes on your large round escutcheon plate are at the 1 and 7 o'clock positions and you do not have a push button shower diverter directly below the off and on handle, then any of the Delta tub and shower trim kits that start with a T17, except for the T17T series trim kits will interchange for you. The cartridges that come with the new trim kits will not fit your valve body, so you will need to reuse your existing cartridge (RP32104). Best regards, Tanya
Answered by: Tanya
Date published: 2017-09-18

Is this a high flow valve 4.7

Asked by: AZCARPENTRY
Hi, AZCARPENTRY! Thank you for your question. The R10000-PFS-MFWS is not a high flow valve body. Our R10000-UNBXHF and R10000-UNWSHF do have high flow. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2019-03-16

What's the GPM/Pressure ratings on this?  By itself and when combined with a R11000 using a 17T/Thermostatic cartridge.  Will it be capable of supporting a shower head (2.5gpm) handheld (2.0gpm) and 2 body sprays (2.0gpm)?

Asked by: Yinn
Thank you for your question, Yinn! Installation factors such as the PSI to the home can impact the maximum flow rate and the diverter rough-in will slightly reduce the flow rate as well. The 17T series will, however does provide the highest Gallons Per Minute possible at approximately 10.9 gpm, 41.3L per min at 80 PSI when using a High Flow rough-in such as the R10000-UNBXHF. This Rough-in, although it has a blocked tub spout port, includes screwdriver stops which will also reduce flow slightly. Either rough-in valve should be able to support these products but if you have a lower PSI in the home, we would recommend a High-Flow valve instead. https://www.deltafaucet.com/bathroom/product/R10000-UNBXHF Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-05-25

Is PEX Cold Expansion = ASTM F1960

Asked by: John
Thank you for your question, John. Our cold expansion (MF) valves have ASTM F1960 standard fittings. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-12-19

Is this made for Uponor ProPex connection rings?

Asked by: aiwa2child
Good afternoon aiwa2child! Thank you for contacting Delta Faucet Company. We are happy to help you. This valve is intended to be used with 1/2 inch PEX Cold Expansion fittings. We appreciate your business and look forward to continuing to serve you! Best Regards! Frank
Answered by: Frank
Date published: 2020-10-28
  • y_2021, m_3, d_7, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_R10000-PFS-MF, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 107ms
  • questions, product
Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
BiltLogo IntelligentInstructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instructions.

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.