Floor Mount Tub Filler - Rough with Stops

Hi JessiL, Thank you for your question. The flow rate for the R4700-FLWS is determined by the faucet trim placed on it. The flow rate for the faucet is 6 gpm @ 60 psi. Thanks, Dave

Thank you Rosanna. Please then consider revising the instrucrions to read something like "The stop valves should be opened no more than X full turns." Where X is the number of turns at which the stem is at risk of being launched out of tbe valve body. Mill Rat

Hi Nay, Thank you for your question. The T4752-FL, T4759-FL, and the T4797-FL are the free standing tub filler trims that work with the R4700-FLWS rough. http://www.deltafaucet.com/bath/romantub/filter-results.html?sort=pricehighlow&type=type-roman-tubfiller&function=bath-romantub Thanks, Dave

Hi, Bruno! Thank you for your question. Here is a link to a how-to video on how to install the Delta Floor Mount Tub Filler: https://www.deltafaucet.com/video-gallery/install/how-install-delta-floor-mount-tub-filler Best Regards, Rosanna

Hi, Johnpal! Thank you for your question. We do not have a suggested measurement between the wall and Delta R4700-FLWS. We leave this decision up to the installer/end user of the faucet to determine what is best for their bathroom installation. Best Regards, Rosanna

Dear Neal, Thank you for your question. The pressure of the Delta Floor mount tub filler rough R4700-FLWS valve, can not be adjust for different pressure or temperature. The cartridge assembly of this faucet can be adjust for hotter or colder water, but not the pressure. Best regards, Tanya

Hello Gleneages, Thank you for your question. The R4700-FLWS has supply stops that allow you to shut off the water at the valve during installation. It also will accepts threaded supply connections. The R4700-FL does not have stops and requires soldering. These are the only rough-in valves for our freestanding tub fillers. Please know that all of our products meet or exceed industry standards for performance and safety. Best regards, Tanya

Hello Robarn, Thank you for your question! I am happy to help you! The screw size for the Delta bolt RP75217 is 1/4 -20 inch screw, we do not have any longer screws that would work. Please contact us back for any further questions. Best Regards, Nicole

Hi Wayne, thank you for your interest in the R4700-FLWS! The mixing valve is included with the trim. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Arturo, Thank you for your question about the Delta Faucet model R4700-FLWS Floor Mount Tub Filler - Rough With Stops. We will be happy to assist you as quickly as possible. This valve rough has 1/2" NPT female inlets. An adapter can be used when installed according to the manufacturer's instructions. Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi JW1989, Thank you for your question about the Delta Faucet R4700-FLWS. The female inlets are threaded and not designed to solder copper directly. The R4700-FL has 1/2" copper solder or sweat connections, but doesn't have stops. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Edsel, thank you for contacting Delta Faucet Company! The Delta Faucet R4700-FLWS has a maximum finished floor thickness of 3" inches. The minimum deck thickness is 3/4" inch. We do not manufacture an extension kit for this model at this time. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello St Pete Mike, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. Once installation of the finished floor is complete the plastic guard on the Delta Faucet model R4700-FLWS Trinsic® Floor Mount Tub Filler - Rough With Stops is intended to be cut to allow access to the hot and cold inlets and the stops from above the flooring. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello! The free standing tub fillers do not offer cartridges with adjustable temperature control. You will want to adjust the temperature of the hot water heater to increase this. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Texastom! Thank you for your question and we are happy to help. The Delta R4700-FLWS subfloor mounting screw threads are a #8-15 x 1.25". The trim mounting bolts come in 2 different lengths, 1/4-20 x 2.32" and 3.70". With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Fd0024, Thanks so much for contacting Delta Faucet Company about R4700-FLWS! I have included a link below to the parts diagram showing what parts are available separately. https://media.deltafaucet.com/PartsDiagram/DPD-B-R4700-FLWS_A.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Greg! Thank you for your question and we are happy to help. The Delta R4700-FLWS installation instructions are linked below: https://media.deltafaucet.com/MandI/76944%20Rev%20F.pdf Any other videos we have on installation are on our official YouTube channel. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Thank you for your question, mxracer153! Any Delta Floor mounted tub filler is compatible with the R4700-FLWS Rough valve. https://www.deltafaucet.com/bathroom/bathing/tub-fillers Best Regards, Benjamin

Hello Sandra, Thank you for contacting us, I would be happy to help you. Our Delta R4700-FLWS COMPLIES WITH: • ASME A112.18.1 / CSA B125.1, I have attached a link to our technical specification sheet. https://media.deltafaucet.com/SpecSheet/dsp-b-r4700-flws_C.pdf Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Randy, Thank you for your question about the Delta Faucet model R4700-FLWS Floor Mount Tub Filler - Rough With Stops. I am sorry this information was not readily available, and I am happy to help! The T4759-FL tub filler trim cartridge includes a rotational limit stop. It can be adjusted counterclockwise to increase the maximum temperature. Loosen the set screw and remove the handle to access the cartridge. See the installation and maintenance manual for more information. https://media.deltafaucet.com/MandI/107565%20Rev%20C.pdf Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello acg1985, Thank you for your review regarding Delta Faucet R4700-FLWS! We apologize this did not meet your expectations. Yes, when you thread the test caps on the hot and cold water, turn the water on to ensure there are no leaks anywhere. We appreciate your feedback and look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

Hi Noel, Thank you for your question about the Delta Faucet Floor Mount Tub Filler Rough. The position of the faucet is up to the installer. I recommend the specification sheet to help decide the faucet position. The spout reach is 8 1/2" inches. https://media.deltafaucet.com/SpecSheet/DSP-B-T4797-FL-LHP%20Rev%20E.pdf Please reach out with any additional questions! Best Regards, Bryan

Hello Bill! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The flow rate for the Delta Faucet R4700-FLWS is determined by the faucet trim placed on it. The flow rate for the faucet is 6 GPM @ 60 psi. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie