Delta®
Tub Spout - Pull-Down Diverter in Stainless
Model#:
RP17453SS
Image Thumbnail, click to view zoomed product image
null
PRODUCT FEATURES
Included with all applicable faucets, we know that sometimes little parts like this Delta Pull-Down Diverter Tub Spout in Stainless RP17453SS get lost or misplaced. That's why Delta has made it available for the handy DIYer to order. Just another way Delta is more than a faucet.
- Pull down to Divert
- 5 1/4" total length
- Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
2-1/2
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
Headaches from
Bad Change
I have read previous review, and I am seeing similar issues, I replaced the same faucet with a new that had worked for a number of years. I initially thought that I was not installing properly, but I cannot get the new faucet to stop leaking, I wasted $40 at Ace, now I am looking for a different option.
Date published: 2025-04-08
Rated 1 out of
5
by
Sammi from
No set screw for a 80 diverted basic faucet
Didn’t come with set screw and ahit straight off the pipe! Can only replace delta with delta and they can’t even make their own stuff work with the items that are out in by contractors. So annoyed.
Date published: 2024-11-03
Rated 5 out of
5
by
Mar59 from
Ours has lasted.
We have had ours for 27 years and only now do we need to replace it. I’m looking for the part and hoping the newer ones last as long.
Date published: 2024-10-20
Rated 5 out of
5
by
FairyTalePink1337 from
Excellent spout!
In the past several months I did some updates to my shower. I recently got a Moen Verso showerhead, and I wanted my Delta valve trim and spout to aesthetically match my showerhead in style. For the valve trim I went with the Delta Modern Series.
For the spout, I went with this one with the pull-down diverter. It has a nice modern design that seems to go well with my valve trim and showerhead. It fit right onto my existing Delta adapter with ease. The best part about this spout is that the diverter completely seals while showering, resulting in higher shower pressure. I would definitely recommend this spout if you want to improve your shower pressure.
Date published: 2023-12-16
Rated 1 out of
5
by
JT922 from
Don’t buy
Had installed for less than a year and it leaks out when trying to shower. Go with something that has less plastic components.
Date published: 2023-08-11
Rated 5 out of
5
by
Woodhead from
Awesome product & service
I've had this tub spout 3 yrs and noticed issues with the finish when I removed it to work on the shower grout. After contacting customer service, Daishana handled it smoothly and in a professional and quick manner. The spout has been exceptional with no issues and I highly recommend it, Also, their customer care group is always outstanding!
Date published: 2023-04-06
Rated 1 out of
5
by
Ga Mom honest review from
The diverter allows allot of water to leak
My 15 yr old tub spout diverter started squealing and needed replaced. You would think you could access the O-rings inside this reliable spout but I was told it has to be replaced. Got the pull down one and when activated it isn’t stopping the water flow. Please go back to the old 1990 style Delta.
Date published: 2021-09-24
Rated 1 out of
5
by
Furious from
Very disappointed
The inner plastic cracked allowing water to bypass when attempting to divert.
Date published: 2021-09-06
Q&A
I have a 1" threaded female adapter that is sodered onto the normal 1/2" threaded copper pipe coming from the wall. I am looking for an easy fix...
From my research I have found that the delta 17453 may work with the included adapter. It sounds like the adapter that comes with this is like the one that is sodered onto my existing pipe.
Does this adapter easily come off of the 17453 spout so I can just thread in the 17453 onto my existing 1" adapter?
Hi Chris,
Thank you for your question! This tub spout comes with the RP12307 adapter. If you already have this adapter installed, simply unscrew the included adapter and screw on the spout.
Best regards,
Jon
Date published: 2024-03-28
what spouts will replace my 1400 series?
I have a rp12307 adaptor sticking out of the wall from when the first delta was put in. Alot of the spouts I have looked at only have thread out at the end of the spout about 4" further out.
Hi Jeff,
Thank you for your question!
A majority of our tub spouts will fit the RP12307 adapter. The basic ones are the RP17453 and RP5834. Below is a link to browse our tub spouts. In order to see if it will work on our website, refer to the product features tab and make sure it says that it will thread onto 1/2" IPS nipple and that it will sweat onto 1/2" C.W.T.
http://www.deltafaucet.com/bath/showering-components/filter-results.html?finish=cr&sort=pricehighlow&type=type-showercomp-tubspouts&function=bath-showering-components
Best Regards,
Daniel
Date published: 2024-03-28
can you order the insides of spout.
Hi, Scott.
Thank you for your question. The internal plastic piece for the Delta RP17453 Diverter Tub Spout assembly is not available on it's own. If the part is needed, the whole tub spout would need to be replaced.
Best Regards,
Rosanna
Date published: 2024-03-28
Do you make a spout with a pull down diverter and threads into the nose
I have a 4 inch nipple i do not want to change. I also want the positive sealing the pull down divertor provides
Hi Bill, Thank you for your question. We do not offer a pull down tub spout diverter that will accept a pipe nipple into the nose of the spout. The pull down spouts use or RP12307 tub spout adapter that threads onto a pipe 5/8" to 1-5/8" from the finished wall.
Thanks,
Dave
Date published: 2024-03-28
Can tub spout and diverter RP17453 be sweated on 1/2" copper tubing?
Thank you for your question. Delta Faucet model # RP17453 can either be sweated onto a 1/2" copper pipe or threaded onto a 1/2" iron pipe.
Date published: 2024-03-28
Replacement diverter for 4" threaded pipe
What Delta replacement tub diverter spout do I need to fit onto a 1/2 (inside diameter) copper pipe that protrudes exactly 4" from the wall? At the end of the pipe is a soldered threaded fitting on which the diverter screws directly. The combined distance from the wall of the pipe and the fitting is 4" exactly. The outside diameter of the threaded fitting looks to be about 3/4 inch. The original diverter that must be replaced is chrome metal (not plastic) and has a pull up knob on it. I don't want to cut the pipe or resolder a threaded fitting to a shorter length. thanks in advance.
Hi ASM, Thank you for your question. Our RP61357 is a metal diverter tub spout that will thread onto a pipe that is 3-7/8"-4" long. The pipe will thread into the nose of the spout.
Thanks,
Dave
Date published: 2024-03-28
My diverter won't pull down to turn the water on at the shower head. If I take it off there is an oblong washer that is badly worn that falls out. If I pull the head open & shake the washer back in place it works again. Can I order a new washer?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-05-17
Delta Tub Spout - Pull down diverter
My delta pull down diverter is leaking. Can I simply replace it with a new RP17453 and keep the old adapter in place or do I need to install a new adapter as well?
Hi Sam, Thank you for your question. You can take a new RP17453 tub spout and screw it on to your existing tub spout adapter. You will not need to install the new adapter.
Thanks,
Dave
Date published: 2024-03-28
I purchased the rp17454, from Home Depot hrough Mail order. The previous tub spout was attached by set screw.
The existing copper pipe is 1/2 ", a length from the wall to the end of the pipe is 2 5/8". 1) will I have to cut the pipe to a set length? 2) I have never sweated copper pipe, is this my only option to install this tub spout?
Hi D&D,
Thank you for your question. Delta Faucet models RP17453 and RP17454 attach to the walls in the same way. They can either be sweat onto a 1/2" copper pipe or threaded onto a 1/2" iron pipe. They both include the RP12307 adapter assembly.
The only difference between the two models is the RP17453 is non-metallic and RP17454 is metal.
Thanks.
Jody
Date published: 2024-03-28
Direction Stickers
We have Delta tub spout RP17453 in our property and some of the stickers that give directions on how to use have been removed or need replacing. Can I order just the stickers?
Hi Mspringer,
Thank you for your question. The RP17829 and RP17472 are the stickers that inform others of how to use the RP17463.
Thanks,
Alexis
Date published: 2024-03-28
What replacement part will work for my tub? It has a 1inch connection as shown in the photos.
Hi Dave, Thank you for your question. The RP12307 tub spout adapter that comes in the RP17453 tub spout is a brass fitting. Although similar we cannot verify that the pictured plastic adapter is the same size.
Thanks,
Dave
Date published: 2024-03-28
Will your RP17453 tub spout with pull-down diverter screw onto my threaded 1/2" copper pipe protruding 4 1/4" from the tub sidewall?
Hi Ken,
Thank you for your question. Unfortunately, the pipe would be too long to install this tub spout.
Some tub spout models will list "Thread into nose of spout" in the product features, such as the RP61357. However, the pipe should be 3 7/8 - 4" for these models.
http://www.deltafaucet.com/repairparts/details/rp61357.html
Best regards,
Jon
Date published: 2024-03-28
Delta 17453 adapter
Saw on YouTube where the adapter could be attached with a hex screw rather than sweated. Where can I get the adapter or s package that has the two adapters. Thanks
Hi Will,
Thank you for your question! This spout can be installed on the RP33794 Slip-On Adapter, which is available through our web store.
http://www.deltafaucet.com/repairparts/details/rp33794.html
Best regards,
Jon
Date published: 2024-03-28
What diverter stub out options are available?
I want to buy a Pull Down Diverter, but I have not been able to find if a 3/4" stub out will fit., or what model will fit.
I am fairly adept at plumbing but would like to forgo sizing down to a smaller fitting within the wall cavity.
Does Delta offer the Pull Down Diverter tub spout with a 3/4" NPT adapter within the unit?
Hi Craig, Thank you for your question. None of our pull down tub spout diverters will fit a 3/4" stub out. We offer the U1075-PK and U1011-PK which are pull up style of diverters that will thread onto a 3/4" IPS nipple.
Thanks,
Dave
Date published: 2024-03-28
Will this fit 1 inch
The pipe my prior diverter came off of has a 1 inch nipple, will this model fit?
Thank you for your question. Delta Faucet model # RP17453 is sweat onto 1/2″ C.W.T. or thread onto 1/2″ IPS. You will need to get an adapter to use this tub spout.
Date published: 2024-03-28
How to remove delta tub spout - pull down diverter
It seems ro have a set screw hole in the bottom however there is no set screw to be found. I took a picture of the bottom screw hole and see nothing in there. The spout It isnt s rewing off either. Please help.
Hi Mrs. Fix it,
Thank you for reaching out. The hole on the bottom of the spout is a weep hole and does not contain a set screw. This tub spout threads onto an adapter, which connects to 1/2" IPS or sweats onto 1/2" copper. If it seems stuck, there may be sealant between the wall and spout that is preventing it from turning.
Best regards,
Jon
Date published: 2020-07-30
What size is th o-ring that is on the brass spool that seals against the inside of the viverter valve?
Thank you for your question, leroy47! The o-ring on the RP12307 adapter, that comes with the Pull-Down Diverter Tub Spout RP17453, is available alone as the RP1745. The o-ring itself is 15/16" ID x 1-1/8" OD x 3/32" thick.
Best regards, Edward
Date published: 2024-03-28
4" copper pipe. Will this work?
Hi,
The measurement of the copper pipe from the finished wall to end of the nipple is exactly 4". Will this spout fit? I'm assuming my setup is standard and many people have the same setup.
If this spout won't fit, what are my options for a"pull down diverter" style tub spout?
Thanks!
Dear Allen,
Thank you for your inquiry! This Delta Pull-Down Diverter Tub Spout RP17453 is designed to sweat onto a smooth copper pipe extending 2 - 4" from the finished wall, or thread onto a 1/2" IPS nipple extending 5/8 - 1 5/8" from the finished wall.
https://www.deltafaucet.com/files/live/sites/delta/files/customer-service/FAQs/Tub%20spout%20install.pdf
Best regards,
Tanya
Date published: 2017-06-11
What are my conversion options for RP17453?
I have the 600 series valve and RP17453 spot. I am using the renovation kit (RP54870SS), but want to know which other SS spouts are compatible with this stem,
Hi Willie,
Thank you for your question! This tub spout is available in the Stainless Steel finish, part number RP17453SS. It uses the RP12307 adapter, so any spout that uses this adapter will also work.
http://www.deltafaucet.com/bath/details/rp17453ss.html
Thanks,
Jon
Date published: 2024-03-28
I need to replace just the diverter valve chrome piece
Does that piece have a threaded hole about 1-1/4 inches in diameter so I can install it in the existing copper part?
Hi Fred, Thank you for your question. The RP17453 tub spout will come with a new RP12307 adapter included, but you should be able to thread the spout onto your existing piece if you are replacing the same item.
Thanks,
Dave
Date published: 2024-03-28
The divergent on my spout RP17453 gets stuck in both positions and doesn’t pop back up when water is off - can it be fixed or does it need to be replaced - the diverted can forceably be pulled or pushed into both positions
Hi, Matt.
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta diverter tub spout assembly. If the diverter is stuck, we would recommend to replace the whole tub spout assembly.
Best Regards,
Rosanna
Date published: 2024-03-28
I have a Delta #RP17463 chrome tub spout with diverter on my tub now. It is 20!years old but rarely used. I want to change it to stainless. There is no need for a diverter since there is no shower. What non-diverter tub spout would you recommend?
Thank you for your question, Rodwil! The RP17453 tub spout is a sweat onto 1/2" C.W.T. or thread onto 1/2" IPS installation, however, I will include a link below to all of our non-diverting tub spouts for reference.
https://www.deltafaucet.com/search-results?searchTerm=non-diverter
Best regards, Edward
Date published: 2024-03-28
Delta RP17454 Nipple Length?
The instructions say the pipe should extend from 1/2 to 1 1/4 from the finished wall. My pipe is about 1 5/8 from the wall. It appears to work fine and I can see no leaks. There was plenty of length inside the spout for the o-ring to still seat.
Is this acceptable or could there be issues that I am not seeing?
Thanks
Dear Elgato,
Thank you for your inquiry! This Delta Pull-Down Diverter Tub Spout RP17453 is designed to sweat onto a smooth copper pipe extending 2 - 4" from the finished wall, or thread onto a 1/2" IPS nipple extending 5/8 - 1 5/8" from the finished wall. There should be no issues with your install.
https://www.deltafaucet.com/files/live/sites/delta/files/customer-service/FAQs/Tub%20spout%20install.pdf
Best regards,
Tanya
Date published: 2024-03-28
Pull down diverter spout
I have a pull down diverter spout similar to delta models RP17453 and RP17454. Its lendth is 6 1/8". The threads are at the base of spout (the end that goes against the wall) and the thread opening is 1 1/4". The iron pipe pertudes 2 3/16" from the wall. The threads are at the base of the pipe.
Are these the right models for my needs?
Thanks.
George
Thank you for your question. The only difference between Delta Faucet model # RP17453 and RP17454 is that RP17453 is non-metallic and RP17454 is metal. You will need a 1/2 inch pipe for installation of either one of these models.
Date published: 2024-03-28
what is the lowest psi that the faucet will work with?
Dear James,
Thank you for your question. The Delta RP17453 Pull-Down Diverter tub spout has a flow rate of about 2.6-2.8 gpm at 10PSI. Please view flow chart on the Technical Specification document below.
https://media.deltafaucet.com/SpecSheet/DSP-B-T13022_Rev_D.pdf
Best regards,
Tanya
Date published: 2017-02-08
I already have the threaded adapter on my pipe. I assume it has been sweated on as it will not turn. Will this fit with the adapter that is threaded at the back with an o ring in the front?
Hello Jeff,
Thank you for your question! This tub spout comes with the RP12307 adapter. If you already have this adapter installed, simply unscrew the included adapter and screw on the spout.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP12307
Best regards,
Tanya
Date published: 2024-03-28
What is the size of the o-ring on the part that is sweated on the 1/2" copper pipe? I need to replace it.
Hi, Flip!
Thank you for your question. The o-ring that comes with/on the tub spout adapter RP12307 is available as a separate part, part number RP1745. The o-ring is 15/16" ID x 1-1/8" OD x 3/32" thick.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP1745
Best Regards, Rosanna
Date published: 2024-03-28
We are replacing another Delta spout that broke. We have the adapter for this one from the previous that is soldered on. The adapter starts (threaded end) approximately 1.25” from the finished wall. Will this spout work and reach the wall?
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
The spout sweat onto 1/2" C.W.T. or thread onto 1/2" IPS.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-01-08
If I already have a wall mounted tub spout with a diverter, is it as simple as removing the one there and installing the new one. Or is it more to it than a screw off and screw on?
Hi Phillyboy,
Thank you for your question about the Delta Faucet tub spout model RP17453SS.
This is installed with the RP12307 adapter. If you already have a Delta tub spout with a similar adapter, you can install the new tub spout without changing the adapter. Or, the adapter fits 1/2" threads or sweat to 1/2" copper pipe.
See the INSTALLATION WITH SWEAT/THREAD ON ADAPTER section here for more information:
https://media.deltafaucet.com/MandI/107700%20Rev%20J.pdf
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-08-09
Is RP17453SS plastic or metal?
Hi Rickfischer51,
Thanks so much for contacting Delta Faucet Company!
The Tub Spout MODEL#: RP17453SS is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.