Universal Showering

Premium 3-Setting Shower Head in Champagne Bronze

Model#: RP34355CZ
Universal Showering
Premium 3-Setting Shower Head in Champagne Bronze
Model#: RP34355CZ
List Price: $22845
PRODUCT FEATURES
Replacing your shower head is one of the quickest, simplest upgrades you can make to your shower. Our shower heads feature a wide range of styles and innovations, and install in less than 20 minutes - no special tools required. Designed to look like new for life, Brilliance® finishes are developed using a proprietary process that creates a durable, long-lasting finish that is guaranteed not to corrode, tarnish or discolor. While other products may gather unsightly mineral build-up over time, Delta soft rubber Touch-Clean® spray holes allow any mineral residue to simply be wiped away for an instantly refreshed look – with no need for soaking or the aid of chemical cleaners.
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your shower head and hand shower with the touch of a finger
  • Installs in minutes
  • Spray settings include: Full Body spray, Massaging spray, Drenching spray
  • 4.3" Shower Head length
Technology and Special Features
Touch-Clean®
Brilliance® Finish
Documents & Specs
Installation Information
Flow Rate :
2.50 gpm @ 80 psi, 9.5 L/min @ 552 kPa
Overall Height (in.) :
5-3/5
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Up Your Shower Game Great product=better showers.
Date published: 2026-03-02
Rated 5 out of 5 by from Nice upgrade! Great! Best shower head ever!
Date published: 2026-01-11
Rated 4 out of 5 by from Shower 🚿 Went as expected. No surprises.
Date published: 2025-10-16
Rated 2 out of 5 by from Water leak through adjustment ring As others have reported, our 2 shower heads of this model developed significant cascading leaks around the shroud/adjustment ring. It seems likely this is due to an O-ring failure and it is unfortunate that a simple refurbishment kit is not readily available to fix the problem. Prior to failure, the heads were wonderful.
Date published: 2025-08-21
Rated 1 out of 5 by from Terrible shower head I had 3 of these showers heads and they all leaked around the swivel to adjust the spray after 6 months of use. Total garbage shower head. Replaced it with a Moen of similar design. It’s been over 14 years now and the Moen shower head still works great.
Date published: 2025-07-04
Rated 1 out of 5 by from Leaking all over Same as others have posted. Leaking and spraying water all over due to failed o-ring.
Date published: 2025-04-03
Rated 5 out of 5 by from New Delta Shower Head I thought my old shower head was fine. I guess I’d forgotten what “a full head of steam” felt like!
Date published: 2024-11-27
Rated 5 out of 5 by from Love shopping with them Love shopping with them. Products in stock and delivered in a few days if not the next day.
Date published: 2024-09-05
  • y_2026, m_6, d_10, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_117
  • loc_en_US, sid_RP34355CZ, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

What is body material made of?  Brass?

Asked by: Roger1
Thank you for your question, Roger1! Our shower heads and hand showers use either a metal and plastic combination or a proprietary mixture of components to ensure a long lasting, high quality product, while maintaining safety control for the various temperatures of water that go through the product. This shower head is non metallic. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

How do I clean debris out of head? I had to install a new hot water tank & after startup the water slowed down to a trickle

Asked by: Sixpack
Hi Sixpack, Thank you for your question! We do not recommend the shower head to be completely taken apart for cleaning. Our recommendation is soaking the entire shower head in a 50/50 solution of water and white vinegar for approximately 10-15 minutes to dissolve any minerals. You can also remove the debris screen in the back of the shower head to rinse it. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2018-02-13

Can a handheld attachment be added to this shower head?

Asked by: Vaedra
Hello Vaedra, Thanks for your question. Unfortunately, you could not add a hand shower to this particular shower head. However, you could get a separate wall mounted hand shower and install a 3 function diverter into the wall which would allow you to operate both the shower head and hand shower at the same time. Alternatively, you could use the U4920-PK as a handshower mount and diverter. You could hook the diverter to the shower arm and thread the shower head to the front of it. This will allow you to switch between the hand shower and shower head. I hope this helps! Best Regards, Justin
Answered by: DeltaFaucet9
Date published: 2024-03-28

Delta Touch-Clean 3-Setting Shower Head

I have the Delta Touch-Clean 3-Setting Shower Head, Model #: RP34355RB in the Venetian Bronze finish. I would like to be able to attach a metal hose to it in the same finish so I can make it hand held. If this is possible, what parts will I need? If this is not possible, what would be the closest hand held shower head that looks similar to my current shower head? I would prefer a hand held shower head without the bar attachment. Thanks, John Drohan
Asked by: John
Hi John, Thank you for your question. The parts needed to turn you model RP34355RB showerhead into a hand held are not available in the venetian bronze finish. You could add a 3 way shower arm diverter U4929-RB-PK, keep your existing fixed showerhead, and add a wall mount handshower like model 55021-RB. Another option would be to replace your current showerhead with the model 54613-RB shower mount hand shower. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I need replacement gaskets for my RP34355 shower head, searching thru your parts links lead to zero results

Asked by: Robb
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-03-25

I need replacement gaskets/ O rings for my RP34355RB shower head due to leaking.

Asked by: Jim C
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-05-01

How do you change functions on shower head, model RP34355

Asked by: skip
Hi Skip, Thank you for your question! You can change the spray setting by rotating the face of the shower head. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

what is the degree of swivel for this shower head?

Asked by: Beck77
Hello Beck77, Thank you for your question. Delta model RP34355PB swivels about 30 Degrees in all directions. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-11-01

Does part RP34355 come in a nickel finish?

Asked by: Bill5555
Hello, Bill5555! Thank you for your question. The Stainless Steel finish will match brushed nickel. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

What is the diameter?

What is the diameter at the widest point? What is the length from the point that it connects to the arm to the farthest point out? Thank you.
Asked by: Missman
Thank you for your question, Missman. It is 5 1/2" in diameter and 4 1/4" front to back. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-07-27

How do you adjust to each setting, spray, massage & drench?

Asked by: Delta1
Dear Delta1, Thank you for your inquiry! You can change the spray setting by rotating the lever around the face of the shower head. Best regards, Tanya
Answered by: Tanya
Date published: 2020-07-06

How do I 'clean' my Victorian shower head. It's 12 years old and the water pressure has decreased. The one in our guest room has twice the water pressure as ours in the master bathroom. Ours has been used constantly for the 12 years and it needs cleaning.

Asked by: jerry46
Hello, jerry46. Thank you for your question! Please try removing the shower head from the arm and check the debris screen. You can also soak the head in a 50/50 white vinegar and water solution for an hour or so to help dissolve mineral buildup. Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Can you order a shower head filter screen replacement for this product?

Asked by: JoeT
The plumber said we have to replace the whole shower head. Is it under warranty, or do we have to pay full price for it.
Answered by: Doris
Date published: 2024-03-28

I need replacement parts for my shower head 34355rb. I need the green flow restrictor and the gray debris screen. I have 2 shower heads that need the parts and I would rather not replace 2 shower heads. 

Asked by: Cjh928
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2026-02-19

I need a replacement "large-formed o-ring" gasket for my RP34355 shower head. It has the following markings on the gasket: K & M 89152 KTW NBR80

Asked by: JJF1
Hello JJF1, Thank you for your question regarding the Delta Premium 3-Setting Shower Head and I am happy to assist you today. Unfortunately at this time, we do not carry a replacement gasket for this shower head and I apologize for the inconvenience. If you could please refer to the email I sent to you regarding this matter, I will be more than happy to help you with resolving this issue. If you would rather discuss this issue further over the phone with us, please do not hesitate to give us a call on our warranty line at 800-345-3358. Thank you, Brandy
Answered by: Brandy
Date published: 2024-03-28

There is a rubber washer or o ring inside this shower head. How can I get a replacement?

My shower head leaks out the side. An o-ring from the hardware store doesn't fix the problem.
Asked by: Frank
Hi, Frank! Thank you for your question. The shower head o-ring is not a replaceable part. If the shower head o-ring needs to be replaced, you would have to replace the whole shower head. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2024-03-20

I need a 3 spray position shower head o ring repair kit. It says tge email I have used for 25 years is invalid so I supplied gmail

Asked by: Rowdy
Hi Rowdy, Thanks so much for contacting Delta Faucet Company about, RP34355CZ! I am sorry for any inconvenience this has caused, unfortunately we do not have a repair kit for the shower head. If the unit is leaking when off, then a repair kit for your cartridge is needed; However, it would depend on the series you currently have installed. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-04-24

Did you ever make one that is like a satin finish but lighter than champagne bronze. My house is 16 years old and I’d be love to replace the shower head with the original color. 

Asked by: Tim clare
Hello Tim Clare, Thank you for your question regarding the Delta Faucet Premium 3-Setting Shower Head, model RP34355CZ! Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you as quickly as possible. Unfortunately, we do not currently have any showerheads in the Satin finish; however, Brushed Nickel would be the closest finish to match. I apologize for any inconvenience that this may cause. You can also go to your local wholesaler, and request finish sample rings to see which finish would best match your current showerhead. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialists
Answered by: Customer Service
Date published: 2024-03-28

Does this shower head come apart for cleaning? We have well water.

Asked by: Ray D
Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize this information was not readily available to you and we are happy to help! No, our showerheads are not designed to come apart. Please refer to the list of our cleaning and care below. Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to build-up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean microfiber cloth should help keep your product looking beautiful. To remove water spots, use warm water and a damp microfiber cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward. If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All Purpose Cleaner, Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturer's instructions for use. Avoid using the following which can damage your finish: · Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy-duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. Avoid bleach-based cleaners. · Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric, and/or phosphoric acids and caustic agents. · Avoid harsh abrasives or polishes We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-09

I just purchased a replacement Delta shower head. It is a replacement for the same, Model RP34355. How do I remove the water saver feature located in the inlet? Is there a drawing available and instructions available for cleaning water outlet holes?

Asked by: bob625
Hello bob625, Thank you for contacting us! I am happy to help you! The flow regulators in our Delta Faucet shower heads cannot be removed, or the warranty will be void on that item. Please contact us with any questions or for further assistance. Best Regards, Emma
Answered by: Delta7
Date published: 2024-03-28

Does this shower head come in a smaller size? In brass & chrome?

Asked by: Barb
Hello Barb, Thank you for your question! I am happy to assist you! The Delta RP34355CB is the only chrome and polished brass dual-finish shower head available to order. It is not available in a smaller size. Please contact us back with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

I need to replace the gasket (slip ring?) in this showerhead. I measure the item as approximately OD 35.5mm, ID34mm, thickness 1mm, the profle is a 'one step'. What would be the Delta part number for this item?

Asked by: CRHJ

Helllo, I have a RP34355 rubbed bronze shower head and water is leaking badly out of the seam above the lever. I have soaked it in a vinegar solution, but I really think it needs new o-rings. Please advise. Thanks 

Asked by: John
Hi John! Thank you for your question and we are happy to help. Please contact us directly for further assistance. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-25

My shower head is leaking. It is Premium 3-Setting Shower Head in Venetian Bronze MODEL#: RP34355RB. Is it fixable or do I need a replacement? Really love Delta products. Thank you

Asked by: Ray P
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-01-07

Does the lifetime limited warranty cover leaks from the shower head while the shower is on?  Love the remaining pressure and spray but the leaking has to go.  I have a discontinued RP34355SS I think as it was installed in the home I just purchased. 

Asked by: Osurudy
Hello Osurudy, I am sorry to hear that your shower head is leaking. I have sent you an email for further assistance with this issue. Best Regards Violet
Answered by: Delta
Date published: 2024-03-28

Where can I view a page of parts for model #RP34355RB bathroom shower head

Asked by: Artl

My shower head leaks around the housing where the rotating ring attaches to the main housing. This leak is not around the nozzles or face of the shower head. I tried cleaning the nozzles in case back pressure was causing the leak but that didn't help.

Asked by: Davidfn
Hi Davidfn, thank you for your interest in the RP34355RB! We are happy to assist you! We have reached out to you directly via email in regards to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

WHERE CAN I GET THE O-RING ON TOP OF THE SHOWER HEAD RP34355? Water is gushing out on the rim above the shower head and guess the O-ring has worn out over the years

Asked by: KanM
Hi KanM, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! Please reach out to us directly so we can assist you further with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

looking for the replacement o-rings on 1755-716 shower head. both small and large o-rings.

Asked by: dwap
Hi dwap, Thanks so much for contacting Delta Faucet Company! Unfortunately, there are no replacement parts for the Premium 3-Setting Shower Head MODEL#: RP34355SS. Our products have a Limited Lifetime Warranty that covers parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. I have included a link below for the warranty information. https://www.deltafaucet.com/service-parts/warranty Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

how to change the spray pattern, which are 3 selections?

Asked by: paul
Hello paul, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! The settings on our Delta Faucet UNIVERSAL SHOWERING Premium 3-Setting Shower Head MODEL#: RP34355RB can be adjusted by rotating the perimeter of the spray face using the tab, the spray settings include: Full Body, Massaging, Soft Drench. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28
  • y_2026, m_6, d_11, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_75
  • loc_en_US, sid_RP34355CZ, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 9ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.