Victorian®
Tub Spout - Pull-Up Diverter in Champagne Bronze
Model#:
RP34357CZ
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Included with all applicable faucets, we know that sometimes little parts like this Delta Victorian Pull-Up Diverter Tub Spout in Chrome RP34357 get lost or misplaced. That's why Delta has made it available for the handy DIYer to order. Just another way Delta is more than a faucet.
- Pull up to divert
- 7 1/2" total length
- Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-1/8
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
SmokeyJoe from
All plastic and too scary to install
Very disappointed. I bought this to replace an old tub spout that had internal rusting. I have always had good luck with Delta products. I ignored the one star reviews that had issues with the internal plastic piece cracking, leaking and causing water damage. I recieved this today and immediately sent it back. The shell is also plastic and could easily be broken if someone bumped it hard with their leg. It is very nice looking and has a very nice machined brass adapter, other than the diverter knob and rod the rest is plastic. Too scary to install so I sent it back.
Date published: 2026-03-20
Rated 2 out of
5
by
jpeterb from
99 cent o-ring fails on a $100 faucet
Finish held up but the o-rings in the faucet failed causing water to spray behind the wall, down into the basement. There doesn't appear to be a way to replace the 99 cent o-ring. Now I have to buy a $100 replacement. This was installed several years ago by my plumber so of course I do not have the receipts.
Date published: 2026-01-05
Rated 5 out of
5
by
Ashleigh from
Great customer service and product
My tub spout was purchased 5 years ago. It was stripped when removing it for a remodel. Delta customer service replaced it free of charge. I am a Delta customer for life!! Great customer service. It is a quality piece. Very heavy and works well. We have had no issues with the entire tub/shower set.
Date published: 2025-04-24
Rated 2 out of
5
by
Roberto Guzman from
Faucets
I orders one payed priority mail have not got it yet
Date published: 2022-12-24
Rated 5 out of
5
by
Ernie75 from
Replacement as good as the Original
I bought it as a replacement and the installation was very easy, now it's working as good as new.
Date published: 2022-09-08
Rated 5 out of
5
by
10yrsold from
Easy to install
Just unscrew the old Delta faucet and screw on the new one.
Date published: 2022-06-05
Rated 5 out of
5
by
Butchy from
Great spout
I bought this a week ago and love it
Date published: 2022-02-28
Rated 3 out of
5
by
tkb1471 from
Just needed the guts.
Bought this for the plastic innards. Brushed nickel is discontinued so I was able to get the guts of this out and into the existing one. I think it ought to be sold as such, being plastic and prone to failure so easily.
Date published: 2021-11-30
Q&A
will go onto a 1" connector..the previous one was 1" and was connected behind the wall so in order to change it to the universal size I would need to take the wall out which I don't want to do so I need a tub spout that connects to 1" connector..thanks
Hi, Casey!
Thank you for your question. Unfortunately, we do not make 1" tub spout connections. All of our tub spouts are 1/2". I do apologize for any inconvenience this may cause.
Best Regards,
Rosanna
Date published: 2024-03-28
I need to replace my Delta 1400 tub spout. I unscrewed it and there is a an adapter soldered onto the 1/2 pipe. Will this thread onto an existing adap
Hi TH,
Thank you for your question. This tub spout will thread onto the RP12307 adapter (also included with the spout).
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP12307
Best regards,
Jon
Date published: 2017-06-08
From reading previous questions and answers. How do you sweat onto a half inch pipe? Are there instructions with the replacement piece on sweating? The installer left about 2" of copper pipe in front of the 1" adapter.
Thank you for your question, Dean! This tub spout does install either by sweating onto 1/2" C.W.T. or threading onto 1/2" IPS. The adapter itself will not come with instructions on sweating or soldering as we recommend a professional for this type of installation. Tubing should be cut with a tubing cutter 2-4" from the finished wall. When brazing on the adapter, you will need to remove the external o-ring first and let the brass cool down prior to restoring this ring. If you need further assistance, please feel free to contact us directly.
Best regards, Edward
Date published: 2024-03-28
I need the ring for the spout adapter MODEL#: RP34357
Hi, Jesse!
Thank you for your question. The O-ring for the Delta RP12307 Adapter Assembly is RP1745. Here is a link to this part:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP1745
Best Regards, Rosanna
Date published: 2024-03-28
Tub Spout
Hello
I recently purchased a trim kit BT14496-OB to convert an older 1400 series from chrome to bronze. Everything fits great except the tub spout. I believe the chrome one to be RP38450 from the original literature when I installed some years ago. So do you have a Bronze spout that will just screw on to the old fitting in place of the RP38450? I see model RP34357RB which looks the same as RB38450 but cannot find any specs on the threads to see if it will fit the same?
Thanks
Paul
Hi Pawpie,
Thank you for your question. The RP34357RB will work on the existing tub spout adapter (RP12307).
Thanks,
Jon
Date published: 2024-03-28
Does the RP34357RB come longer than 7 1/2?
Thank you for your question, Tone. Unfortunately, we do not have a longer version of the spout. The longest diverter tub spout that we currently have is 7 2/3", part number RP72565.
Best regards, Jon
Date published: 2024-03-28
Is there a similar spout that is metal and not plastic. I need the rubbed oil bronze color.
Hi, Peggy.
Thank you for your question. Unfortunately, we do not have similar Traditional-Style tub spout assemblies in the Oil Rubbed Bronze finish that are metallic. We do have the RP81273OB, RP61357OB, and RP64721OB tub spouts that are Oil Rubbed Bronze.
Best Regards,
Rosanna
Date published: 2024-03-28
RP34357RB not wrkng, actually not able to divert water to shwer, pull up knob is stuck, ordred a replacmnt, however, when I remved the tub spout the white plstic remins in the tub, not sure how to remv white plastic part.
Thank you for your question, Sunny! The white plastic adapter can be removed by unscrewing this from the metal adapter on your outlet pipe.
Best regards, Edward
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.