Victorian®
Tub Spout - Pull-Up Diverter in Polished Brass
Model#:
RP34357PB
Image Thumbnail, click to view zoomed product image
null
PRODUCT FEATURES
Included with all applicable faucets, we know that sometimes little parts like this Delta Victorian Pull-Up Diverter Tub Spout in Chrome RP34357 get lost or misplaced. That's why Delta has made it available for the handy DIYer to order. Just another way Delta is more than a faucet.
- Pull up to divert
- 7 1/2" total length
- Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-1/8
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
SmokeyJoe from
All plastic and too scary to install
Very disappointed. I bought this to replace an old tub spout that had internal rusting. I have always had good luck with Delta products. I ignored the one star reviews that had issues with the internal plastic piece cracking, leaking and causing water damage. I recieved this today and immediately sent it back. The shell is also plastic and could easily be broken if someone bumped it hard with their leg. It is very nice looking and has a very nice machined brass adapter, other than the diverter knob and rod the rest is plastic. Too scary to install so I sent it back.
Date published: 2026-03-20
Rated 2 out of
5
by
jpeterb from
99 cent o-ring fails on a $100 faucet
Finish held up but the o-rings in the faucet failed causing water to spray behind the wall, down into the basement. There doesn't appear to be a way to replace the 99 cent o-ring. Now I have to buy a $100 replacement. This was installed several years ago by my plumber so of course I do not have the receipts.
Date published: 2026-01-05
Rated 5 out of
5
by
Ashleigh from
Great customer service and product
My tub spout was purchased 5 years ago. It was stripped when removing it for a remodel. Delta customer service replaced it free of charge. I am a Delta customer for life!! Great customer service. It is a quality piece. Very heavy and works well. We have had no issues with the entire tub/shower set.
Date published: 2025-04-24
Rated 2 out of
5
by
Roberto Guzman from
Faucets
I orders one payed priority mail have not got it yet
Date published: 2022-12-24
Rated 5 out of
5
by
Ernie75 from
Replacement as good as the Original
I bought it as a replacement and the installation was very easy, now it's working as good as new.
Date published: 2022-09-08
Rated 5 out of
5
by
10yrsold from
Easy to install
Just unscrew the old Delta faucet and screw on the new one.
Date published: 2022-06-05
Rated 5 out of
5
by
Butchy from
Great spout
I bought this a week ago and love it
Date published: 2022-02-28
Rated 3 out of
5
by
tkb1471 from
Just needed the guts.
Bought this for the plastic innards. Brushed nickel is discontinued so I was able to get the guts of this out and into the existing one. I think it ought to be sold as such, being plastic and prone to failure so easily.
Date published: 2021-11-30
Q&A
RP34357RB not wrkng, actually not able to divert water to shwer, pull up knob is stuck, ordred a replacmnt, however, when I remved the tub spout the white plstic remins in the tub, not sure how to remv white plastic part.
Thank you for your question, Sunny! The white plastic adapter can be removed by unscrewing this from the metal adapter on your outlet pipe.
Best regards, Edward
Date published: 2024-03-28
Hi. Is this tub spout compatible with the Delta shower trim set T17238-RB and the Delta R10000-UNBX multichoice universal tub and shower valve? Are there any other parts I need to buy to complete a new shower and tub install?
Hi there, Kitkat8!
Thank you for your question. Yes, the Victorian Tub Spout RP34357RB can be installed with the Delta Lahara Shower Trim T17238-RB and MultiChoice Universal Rough-In Valve R10000-UNBX for a complete tub and shower install. There would be no other parts needed for this install, beside the connection piping (not provided by us).
Best regards,
Tanya
Date published: 2024-03-28
how do I place the order on line ?
Hi, Jeff!
Thank you for your question. You can usually find Delta faucet parts at any dealer that sells Delta faucets. Some good places to check can be found on our website under Where To Buy.
http://www.deltafaucet.com/where-to-buy/index.html
To order parts directly from Delta, you may call the toll-free Delta Help Line at 1-800-345-3358. We accept Visa or MasterCard for parts orders over the telephone.
Best Regards, Rosanna
Date published: 2024-03-28
Material
Is this spout made of plastic or metal? If both, which parts are plastic and which are metal? I've read some bad reviews about the plastic diverter breaking and causing the water to back up into the wall.
Hi Mando, Thank you for your question. The RP34357CB tub spout is non-metallic. The tub spout threads onto a brass tub spout adapter RP12307 for added strength.
Thanks,
Dave
Date published: 2024-03-28
I broke the plastic part that holds the chromed end onto my RP34357 (too aggressive w/ cleaning). Now the diverter doesn't close completely and sprays when diverted for shower use. Can I replace just the plastic connection parts? Have photo if needed.
Thank you for your question, BenW! The diverter is not a separate repair part unfortunately and new tub spout will be needed.
Best regards, Edward
Date published: 2024-03-28
My shower/bath diverter has become ineffective. RP34357
can I just install a spout with the pull up diverter by screwing off the old broken spout and screwing the new one onto the existing threaded copper pipe. Or is some actual plumbing skill needed.
When the diverter is pulled up, only about 25% of the flow is diverted to the shower.
Hi Bruce, Thank you for your question. The RP34357 tub spout threads directly onto a 1/2" threaded pipe or fitting at the back of the spout. You should be able to unscrew the spout and replace.
Thanks,
Dave
Date published: 2024-03-28
I have a 4 1/8 pipe length out of wall. The end is a 1/2 IPS. Will this product fit snugly against the wall?
Hi, Rubes3030!
Thank you for your question. The Delta RP34357RB Tub Spout Assembly can sweat onto 1/2" C.W.T. or thread onto 1/2" IPS. Here is a link to the tub spout installation guide:
https://www.deltafaucet.com/files/live/sites/delta/files/customer-service/FAQs/Tub%20spout%20install.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
is this faucet metal or plastic?
Hello kenp550,
Thank you for your question. The tub spout is non-metallic.
Best regards, Jon
Date published: 2024-03-28
I recently talked with and email one customer service rep, and Delta is sending me a replacement tub diverter. The problem is the pipe coming from the wall has and modification that means the RP34357RB spout needs a 1" thread. Is there away to do this?
Thank you for your question, Dean! This tub spout will include an adapter that will install either by sweating onto 1/2" C.W.T. or threading onto 1/2" IPS making this 1". If you already have this adapter installed, then the replacement tub spout will simply thread onto this part. Please feel free to contact us directly if you have questions or need further assistance.
Best regards, Edward
Date published: 2024-03-28
I understand the white plastic insert for part number RP34357RB is not available as a seperate part. If I buy a new RP34357RB does it come with it ?
Thank you for your question. Delta Faucet model # RP34357RB does come with the adapter assembly.
Date published: 2024-03-28
Delta just sent me the RP34357RB to replace a broken, no longer available T1455RB. The T1455RB threads onto a 1" connection. When I looked at the description, it appears the RP34357RB threads onto a 1/2" connection. Is this correct?
Hi, ShaneH!
Thank you for your question. The RP34357RB is the correct tub spout assembly for the T1455-RB shower trim kit. The tub spout does include the RP127307 adapter assembly and can sweat on a 1/2" c.w.t or thread onto 1/2" IPS nipple.
Best Regards,
Rosanna
Date published: 2024-03-28
Can I get installation instructions for this tub spout, please
I have this spout, and during a remodel the outer (chrome) part of the spout was taken off, leaving the plastic inner spout connected, coming through the tub wall. Now, I cannot figure how to reconnect the outer spout. I lost the installation instructions during the remodel, can you provide them?
Thank you for your question. Delta Faucet model # RP34357 can either be sweat onto a copper pipe or threaded onto an iron pipe. Included here is a link to the instructions for installing your tub spout. The instructions are on page 12 of the booklet.
http://www.deltafaucet.com/customersupport/documentation/t17455.html?document=mi&documentIndex=0#flashWrapper
Date published: 2024-03-28
Does DELTA sell the plastic adapter piece on the inside separately? I would rather not purchase an entire faucet to replace the white plastic reducer/adapter that was already installed that is now cracked.
Thank you for your question, BigStew95! The plastic diverter insert of the Delta Victorian Diverter Tub Spout RP34357RB is not sold as a separate repair part. Unfortunately, a new tub spout will be needed.
Best regards,
Tanya
Date published: 2024-10-27
Extension Nipple
I am looking for the extension nippe that fits inside the model # RP34357RB tub faucet.
Thank you for your post. Delta Faucet does offer an adapter assembly with part #RP12307.
Date published: 2024-03-28
Does this spout have a flow restrictor in it? Customer is complaining about flow rate at tub spout is slow
Dear Billy,
Thank you for your question. At 60 PSI, the RP34357 Victorian tub faucet will run at 5.6 gallons per minute. This spout does not have a flow restrictor in it. We would advised flushing the unit, if your getting a low or slow flow.
Best regards,
Tanya
Date published: 2024-03-28
Does RP34357 come with the Finial installed on the diverter?
Hi, Ron!
Thank you for your question. The RP34357 diverter tub spout will have the finial on the diverter.
Best Regards,
Rosanna
Date published: 2024-03-28
How do I remove pull up diverter?
Hi, JW!
Thank you for your question. The RP34357 unscrews off of the copper tube counterclockwise.
Best Regards,
Rosanna
Date published: 2024-03-28
When will the brass finish be available for RP34357
Hello JohnC,
Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you.
You can purchase the polished brass Delta Faucet VICTORIAN Tub Spout - Pull-Up Diverter MODEL# RP34357PB online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
When will Brass finish be available for Tub Spout, Part Number RP34357?
Hello JohnC,
Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you.
You can purchase the Delta Faucet VICTORIAN Tub Spout - Pull-Up Diverter MODEL# RP34357PB online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Our Delta tub spout, a Victorian design, has recently started to leak. I have spent time changing the o-rings as I thought this could be the problem. After this did not work, I looked more closely and found the internal white molded part is cracked.
Hi Sheldon,
Thanks so much for contacting Delta Faucet Company about RP34357!
We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-04-01
I just installed this faucet not only a few months ago and realize this faucet was leaking unscrewed it back off the wall just to find out the plastic piece on the inside is broke after looking all the reviews this is an issue with your design
Hi valued Customer,
Thank you for your question regarding our Delta Faucet RP34357. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
We have reached out to you directly by email to further assist you.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-02-21
Is this tub faucet plastic or metal?
Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! The total makeup of our products is considered proprietary. But in general, the faucet or product may contain any or all of the following: Bronze, Brass, Zinc, Stainless Steel, Copper, Aluminum, PEX-C, Silicone, Synthetic rubber - EDPM, Santoprene, Vinyl, Nylon, Plastics, and Ceramics. Please reach out directly with further questions. Best Regards, Kayla
Date published: 2024-01-31
I have a Delta RP34357 tub spout which is attached to the pipe via an old Delta universal adapter. The spout started leaking. The white plastic adapter (inside the spout) is broken. Do you sell this internal adapter?
Does this part come with the internal plastic treaded spout that screws onto the Delta spout adapter?
Hi Joesto,
Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you.
Our Delta Faucet Victorian® Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP34357 does included the plastic diverter insert.
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Kelley
Date published: 2024-03-28
I need to replace our shower spout with diverted. The inside guts of the previous delta spout were white plastic. I need the ability to simply twist the new spout on to the wall. Can you help me? I ordered a faucet last week it had no plastic guts.
Hello Valued Customer,
Thanks so much for contacting Delta Faucet Company about RP34357! The white adapter would need to be removed to install the new tub spout. This tub spout will include an adapter that will install either by sweating onto 1/2" C.W.T. or threading onto 1/2" IPS.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-01-31
In my bathtub, we have delta tub spout with bronze color. it is leaking pretty badly even after replacing new gascket. i need a replacement. can you guys send it? i am not able to find the same color which matches to rest of the stuff.
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
We have reached out to you directly.
Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2026-01-23
More of a statement than a ?.It seams more difficult to obtain warranty parts than ever,I am an NYCLMP with more than 80 employees with in the company,Requested a replacement part pull up spout RP34357RB that should not have been made from plastic .
Hello Greg LMP,
Thank you for your question! I am happy to assist you!
As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance.
Please contact us back with any further questions.
Best Regards,
Skyler
Date published: 2024-03-28
Is this piece covered under warranty?
Delta products purchased from authorized sellers have a limited warranty. See this link for more information. https://www.deltafaucet.com/service-parts/warranty
Best regards, Bryan
Date published: 2024-03-28
I want to replace this model of faucet/diverter here - https://www.deltafaucet.com/bathroom/product/RP17454WH.html - I want to use existing cartridge. will this model work? if not which ones will?
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP34357.
This tub spout sweat onto 1/2" C.W.T. or thread onto 1/2" IPS.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Date published: 2024-06-27
With a proper adaptor, can RP34357 be connected to a garden hose?
Hi Sue88,
Thank you so much for contacting Delta Faucet Company!
The Victorian RP34357 is not recommended to be installed with a garden hose attached as this can lead to shower rise where water leaks from the showerhead when the tub spout is in use.
Please reach out with further questions!
Best Regards,
Skyler
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.