Tub Spout - Pull-Up Diverter in Chrome
Model#:
RP42915
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
This Leland 6-1/2 in. Non-Metallic Pull-Up Diverter Tub Spout in Chrome gracefully reinterprets the time-honored teapot design with decorative, traditional detailing. Getting ready in the morning is far from routine when you are surrounded by a bath that reflects your personal style. Our faucets and their parts are guaranteed for a lifetime, but just in case you'd like to make some repairs on your own we've made this tub spout available for you to order.
- Coordinates with Leland bath collection
- 6 1/2" total length
- Pulls up to divert
- Sweat onto a 1/2 in. CWT connection or thread onto 1/2 in. IPS nipple
- Durable finish guaranteed not to tarnish or corrode
- Non-metallic construction
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-11/16
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
bummedout from
Only lasted 3 years
We installed a new tub and shower faucet and spout 3 years ago. The diverter on the spout is stuck and wont work and the chrome finish is peeling. Very disappointed in this product.
Date published: 2018-01-26
Rated 2 out of
5
by
DickH from
Not cheap to buy but not well made.
Outside is metal, inside is plastic. Spout broke off and sprayed water all over when diverter knob was pulled.
Date published: 2017-08-31
Rated 1 out of
5
by
LizG from
Horrible quality
I purchased two of these faucets as part of a home remodel less than three years ago, and already both of them have failed. The entire unit is made of plastic -- it is chrome colored, NOT actual chrome -- and the interior plastic has broken off on both of my original faucets already! I replaced the first one a year ago, and the second one simply fell off this morning during a shower. These have not been used in any unusual ways. They are simply terribly made!
Date published: 2017-03-31
Rated 4 out of
5
by
FrankM3 from
Leaking internal RP42915 diverter
Have an RP42915 Chrome diverter in one bath room leaking and was wondering if the internal plastic parts that hooks onto the water outlet pipe are available separately. The plastic parts have cracked and are allowing water to leak out the chrome spout cover square drain hole! Looks like several plastic parts and Orings are needed. From reading other reviews I understand the assembly as a whole comes with the plastic parts. Again I was just wondering if the complete set of plastic parts and Orings are available separately? Thank you!
Date published: 2016-08-16
Rated 1 out of
5
by
Charlie2016 from
Diverter breaks upon using
We remodeled our bathroom 3 years ago and had Model RP42915SS Delta Tub Spout installed in our tub. One year later the diverter was not closing properly and not giving us use of our shower. I ordered a replacement in January of 2016. I received a broken diverter as a replacement. I called and was shipped out another on March 4, 2016. I opened box and take out of package and diverter assembly came apart. Haven't been able to install 2 replacements. I am being sent another today June 24,2016. NOT HAPPY. if 3rd spout doesn't work I will ask for refund and never recommend DELTA products..Please fix this issue. Love the look but hate the performance. Seems other RP42915SS customer reviews share my issue.
Date published: 2016-06-25
Rated 2 out of
5
by
WyoDon from
Diverter faulty
During a 2013 bathroom remodel, I had the T17478 tub/shower assembly professionally installed in the tub. The dual function flow control-temp control valve has worked flawlessly but recently the pull up diverter spout started leaking water when in the pulled up position. It leaks so badly that the water flow control has to be turned on all the way to keep the diverter in the shower position. This wastes water, not to mention the energy to heat the water.
Date published: 2016-04-02
Rated 3 out of
5
by
Bendon from
Same story, different verse.
I remodeled my master bath in February 2011. The diverter on the spout lasted 3 1/2 years before it broke. The replacement diverter just broke. I will be ordering my 3rd spout in 5 years! Delta- what's going on? Cheap internal plastic parts, I suspect.
Date published: 2016-03-24
Rated 1 out of
5
by
Jaw2004shs from
Diverter does not work
The finish on this spout looks nice. My wife and I bought our house about 18 months ago with this hardware installed in the newly remodeled guest bath.
We never used that tub or shower until our child was born 6 weeks ago. The spout continuously leaks water when the diverter is pulled up as far as it can go. Also, there is minimal to no water pressure from the shower head.
It looks nice, but the functionality and workmanship is poor. As I am not the original owner, I have no warranty information.
Very disappointed!
Date published: 2016-01-12
Rated 1 out of
5
by
Susan9 from
Disappointed...
I love the look of the product, but not happy with having to replace the tub spout after a little over a year. I have been having trouble with the pull-up diverter for quite a while. Not working correctly. Yesterday the whole unit fell apart. Now I have to replace the entire tub spout and hope the new unit will not fail, I will order it later today.
Date published: 2015-10-31
Rated 3 out of
5
by
bpugmire from
spout broke off wall
We recently purchased a home and all of the faucets are very nice. About three months later, my son stepped into his tub and turned on the water to take a shower and the entire spout shot off the wall. The plastic inside had broken. Because we aren't the original home owners, the warranty does not apply!
The faucet itself is fine, it's just the pvc pipe fitting that screws in to the faucet that broke. I called Delta and they don't sell just that part. You have to purchase the entire faucet for $90 to fix a $1.00 piece.
Date published: 2015-09-02
Rated 1 out of
5
by
brooktondal from
Diverter broke
We installed a new tub & shower in January, 2014, in our winter condo. We used the shower for three months then and for about three months in 2015.
The diverter never worked well; there was almost always less pressure at the shower head than in the tub. In fact, we began to jiggle the diverter to get more pressure to the shower.
The diverter fell apart and proved impossible to fix after a couple of days attempting and going to our very helpful local hardware store for assistance.
The saving grace is that Delta quickly offered to send a new spout/diverter assembly under the warranty. No questions asked.
The problem is that it took almost a week for the replacement part to even ship.
We hope the replacement will last for more than 6 months of use.
Date published: 2015-03-20
Rated 2 out of
5
by
RMetzler from
Diverter fails
I've had the faucet for less than 2 years and the diverter gave out. Beautiful design, but the mechanics a suspect.
Date published: 2015-03-02
Rated 1 out of
5
by
KevinK from
Diverter stopped working
I have had this installed for a few months now, and the pull up diverter has stopped working completely. It is a nicely designed set, but the workmanship is questionable. Very disappointed.
Date published: 2014-12-29
Rated 3 out of
5
by
Susan66 from
Loved the product while it was working properly
Similar problem to the previous reviewer, the pull up diverter is no longer allowing full pressure to the shower head. I would have expected a Delta product to last longer than it did.
Date published: 2013-12-19
Rated 3 out of
5
by
ASTRONAUGHT555 from
pull-up diverter doesn't work right when pulled up
WHEN THE PULL-UP DIVERTER IS PULLED UP FOR REDIRECTING WATER TO SHOWER HEAD, THERE IS STILL TOO MUCH WATER BYPASSING THE PULL-UP DIVERTER GATE VALVE FLOWING BACH DOWN THROUGH THE TUB SPOUT, WHEN THE PULL-UP DIVERTER IS PULLED UP, IT SHOULD SEAL ALL THE WATER GOING THROUGH THE TUB SPOUT AND IT DOESN'T DO THE JOB IT IS SUPPOSE TO DO, THERE IS ALWAYS A STREAK OF WATER GOING DOWN THE SPOUT WHEN THE PULL-UP DIVERTER IS UP.
Date published: 2013-04-01
Rated 1 out of
5
by
girlfriday from
Plastic-not chrome
Not worth the money.
Date published: 2011-02-01
Q&A
I have a Leland series tub/shower set with a chrome finish. I would like to change the look to a brushed nickel finish. Do you have parts available to do this?
Thank you for your question, Steve! The RP42915 tub spout is available in our Stainless Steel finish, which is often referred to as "Brushed Nickel". Other trim pieces from the Leland collection are also available in this finish, even some parts from discontinued models.
https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?collections=Leland%C2%AE&facetFinish=stainless
Best regards, Edward
Date published: 2024-03-28
I purchased shower package T17478-rb. The tub spout is plastic. The part no is x00061469rb Did I get the correct piece?
I have a Leland stainless bathtub unit only in another bathroom and the spout is metal. I purchased another Delta Leland product because I was happy with my first purchase. This plastic spout seems very cheap for a Delta product.
Thank you for your question. Delta Faucet model # T17478-RB does contain a non-metallic tub spout. We do not have the metal tub spout available separately but we do have other metal tub spouts available.
Date published: 2024-03-28
I’ve removed spout RP5834 and want to replace it with this spout. The brass adapter cannot be removed. Does this spout have the white plastic insert and if so, will it twist on over what appears to be the RP12307 adapter that is not able to be removed?
Hello DIYgrl,
Thank you for your inquiry! This Leland Tub Spout RP42915RB does include the plastic insert with the RP12307 brass adapter assembly screwed in the middle. You can remove the adapter from the new spout and just screw the spout onto your already installed adapter/pipe.
Best regards,
Tanya
Date published: 2024-03-28
Need to know if this part includes the plastic adaptor?
Replacing existing spout. It has white plastic adaptor inside that is broken. Wall side of adaptor needs to fit outside of copper pipe with threads at 1+1/4". The spout end of adapter should fit into 1/2" threads (by pull up diverter).
Hi A, Thank you for your question. The RP42915RB diverter tub spout will include the internal white plastic adapter that threads overtop of the brass tub spout adapter.
Thanks,
Dave
Date published: 2024-03-28
I will be updating my bathroom fixtures with the following kit ; RP54870 what is the order number for a chrome replacement spout that will work ? I need 5 inch reach with diverter . thank you
Hello Valued Customer,
Thanks so much for contacting Delta Faucet Company!
The Leland® Tub Spout Model#: RP42915 can be used with your Renovation Kit Model#: RP54870.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-10-24
The PULL KNOB came unscrewed from the rod that diverts the water from the spout to the shower and the rod is too hard to pull up without the knob on it! Can I get just the KNOB in BRUSHED NICKLE OR STAINLESS and just screw it on the threaded pull rod?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-04-23
Does sweat-on adapter and O-ring (12307) come with a replacement Leland diverter spout (42915)? . The adapter is still intact but I do want a new O-ring. Threaded end of adapter is 3/8" from wall. Is this OK for this combination?
Hi BobC,
Thank you for your question about the Delta Faucet RP42915.
This tub spout includes the RP12307 adapter. The adapter should be between 3/8" and 1/2" from the wall. See the installation instructions for more information:
https://media.deltafaucet.com/MandI/107700%20Rev%20J.pdf
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-10-16
I have a Leland (RP42915) tub spout with a diverter. The diverter is redundant as the wall valve control the flow to the shower. I want to replace it with a similar chrome spout that will fit the wall adapter (RP 12307).
Hello MMCCAR53,
Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you.
The Delta Faucet Adapter W/ O-Ring - Tub Spout RP12307 adapter works with tub spouts that thread onto 1/2" iron pipe or brazed onto 1/2" smooth copper.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.