Delta®
Tub Spout - Non-Diverter in Venetian Bronze
Model#:
RP43028RB
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
- 7 1/2" total length
- Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Resources
Installation Information
Single hole installation
Overall Height (in.) :
3-9/16
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
Tub Filler from
Good substitute for wall mount tub filler
[This review was collected as part of a promotion.] Coordinates with the Cassidy collection. Easy to install. We used this with the Delta converter as the wall mount tub filler was a little too large for our application.
Date published: 2025-07-21
Rated 1 out of
5
by
Anonymous from
Junk Plastic
Cheap Plastic If it wasn’t such a hassle I would send it back. I have seen children’s built better.
Date published: 2025-03-23
Rated 1 out of
5
by
BarbaraG from
sprays water sideways out of the spout
Looks nice but it sprays water sideways. It's cheap plastic but costs a lot of money. It has a plastic thing in the faucet that makes the water come out sideways.
Date published: 2022-02-20
Rated 1 out of
5
by
David from
RP 43028 Tub Spout Developed a Leak
My guest bathroom Delta tub spout (RP43028) developed a leak due to a crack in the inner plastic sleeve. Leak becomes a stream when the shower diverter is actuated. I caught this early, but it could have been a costly repair if the stream which exited at the backing plate had become bad enough that it got behind the tile.
Date published: 2019-03-14
Q&A
is this a diverter spout?
Hi Fendi,
Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you.
The Delta Faucet Tub Spout MODEL#: RP43028SS is a Non-Diverter spout.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Does anyone have a picture of area where water comes out? I have RP43028 and Delta sent me a replacement RP52153 and they look different inside. My RP43028 is only 2 years old, we don't even use that bathtub so there's no way it's a calcium build.
Hi Barbara,
Thank you for your question regarding our Delta Faucet Delta Tub Spout - Non-Diverter In Chrome MODEL#: RP43028. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
We have contacted you directly via email regarding this matter.
Thank you for being a loyal Delta customer. We appreciate your business and look forward to continuing to serve you. Please feel free to contact us directly if you have any further questions.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2024-03-28
I need to get a tub filler that has a much shorter filler. I purchased a T5759-WL and it is far too long. It would make the free standing tub sit in the middle of our small bathroom. I would like a 2 handle filled with a spout between 6 and 8 inches.
Hi Bill,
Thanks so much for contacting Delta Faucet Company about the RP43028!
We do not currently manufacture a wall mount tub filler with a shorter spout, and due to the specific installation you are not able to install a standard tub spout either. I am sorry for any inconvenience this may have caused.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
I have a tub spout part number RP43028 on order from Torrco in East Windsor, CT. Can you tell me the specs as far as how long the pipe nipple needs to extend from the finished wall to properly engage with the threads in the spout? Thanks, Don
Hello Delta Customer,
Thank you for contacting us. I am sorry this information is not readily available and I would be happy to help you.
The RP43028 takes the adapter RP12307 which would be brazed to a 1/2" copper pipe. Cut tubing with a tubing cutter at a distance of 2-4" from the finished wall.
Please contact us back if you have any questions or need further assistance.
Best Regards,
Nicole
Date published: 2024-03-28
What material is the spout?
Hello,
Thank you for your question!
Our tub spouts are made of materials that differ on the model. They can contain bronze, brass, zinc, stainless steel, copper and plastics.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-02-27
My wife (Nancy Hall) has been trying to get a replacement for a broken diverter tub spout and now has received two spouts, both non diverter .Just received bronze RP43028RB today, a non diverter. Is there a diverter version?
Hi Bob Hall,
Thanks so much for contacting Delta Faucet Company!
The Victorian® Tub Spout Pull-Up Diverter MODEL#: RP34357RB can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-07-23
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.