Diverter Tub Spout in Matte Black

Hello Jerry, Thank you for your question! I am happy to help you! All of our Delta tub spout have specific installation requirements. Any of our tub spout that come with the RP12307 adapter will fit on a total copper length of 2"-4", I have attached the link to a couple models below and the RP51303BL is the same install as well. https://www.deltafaucet.com/bathroom/product/RP77091BL https://www.deltafaucet.com/parts-product-detail?modelNumber=RP75435BL Please contact us back for any further questions. Best Regards, Nicole

Hi RussB62, Thank you for your question! This tub spout can sweat onto 1/2" C.W.T. or thread onto 1/2" IPS. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi SaraS, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Lahara® Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP51303 does not have a flow restrictor, the flow rate of our tub spout would depend on the PSI in your home and would produce approximately 8-10 GPM. We would recommend a flush to remove any debris or blockage causing a lower than normal flow. Please see the step-by-step instructions below. To flush the open valve without the cartridge, please follow the directions below. 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either a 1/8" or 3/32" Allen screw. So you will need to use the appropriate size Allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. * Note. If there is calcium build-up at the base of the handle, it may be necessary to soak it in a 50/50 solution of vinegar and water. Simply saturate the rag with the 50/50 solution, wrap it around the handle base and place a plastic bag over it. I would recommend doing this the night before removing the handle. 2) After removing the handle, remove the trim sleeve. 3) Then you will need to remove the bonnet nut. The bonnet nut is the threaded ring at the valve opening. It unscrews counterclockwise. You will need a pipe wrench or a pair of channel locks. 4) After removing the bonnet nut, you will need to pull the cartridge straight out. You may need a small, skinny bladed screwdriver to wedge in between the lip of the cartridge and the valve to help start it out. 5) Once the cartridge is removed, you will have an open valve body. 6) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out, much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 7) Re-install the cartridge and re-assemble in reverse of how it was disassembled. The Tub/Shower should then have a good flow. If it does not, the cartridge will need to be replaced. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Price! Thank you for contacting us at Delta Faucet! I will be happy to help! This Delta Faucet Lahara tub spout is plastic. Please contact us directly if further assistance is needed at this time. Best Regards, Tim

Hello J Stephens! Thanks for your question. The tub spout does not have a repair kit. The spout will need to be replaced. Please contact us directly with any further questions or concerns. Best regards, Paul

Hi Jling, Thank you for your question about the Delta Faucet RP51303 Tub Spout. I am sorry this information was not readily available, and I am happy to help! This spout is installed using the included adapter that is sweat onto 1/2" C.W.T. or threaded onto 1/2" IPS. It can replace a 6" spout when installed according to the instructions. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello, Eileen! Thank you for contacting Delta Faucet Company! I know a leak can be frustrating, and I am happy to help you! Our Delta Faucet DELTA® Lahara® Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP51303 o ring is part number RP1745. Here is the link to the part. https://www.deltafaucet.com/parts/product/RP1745.html#undefined Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar

Hi Larry, Thanks for your question regarding RP51303SS! Yes, this is the correct Pull-Up Diverter Tub Spout for model T14438-SS. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our RP5103RB has a plastic insert to attach the RP12307 adapter to the copper tubing. If the white insert if defective, the tub spout will need to be replaced. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Mark, Thank you for your question about the Delta Faucet RP51303 Lahara® Tub Spout - Pull-Up Diverter In Chrome. We will be happy to assist you as quickly as possible. This replacement part is currently available for orders. As a made-to-order company, we do not keep a large stock of many parts. You can purchase Delta Faucet products at many local dealers and internet sites. If a dealer does not carry a specific item in stock, they should still be able to place an order for you. I recommend using the store locator on our Delta website. https://www.deltafaucet.com/where-to-buy Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP51303. The o ring is part number RP1745. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Rick, Thank you for contacting Delta Faucet Company! The RP51303 can be removed by threading counterclockwise. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Laura R, thank you for contacting Delta Faucet Company! The dome insert in the tub spout is designed to allow water to flow around it, to have a laminar type of flow. Removing this piece will result in the water going in different directions and will void any warranties that are available on the product. Our tub spouts allow about 5 to 9 GPM depending on PSI to the home. If you are experiencing a low flow from the tub spout, please remove the tub spout and flush the pipe for about a minute. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta RP51303RB may need the seats and springs replaced in the cartridge. Please contact us directly for further assistance. Best Regards, Carrie

Hello, Dave! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Lahara® Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP51303 sweats onto 1/2" C.W.T. or thread onto 1/2" IPS. The diameter of the back of the spout is 2 3/4". Please see the specification sheet in the link below. https://media.deltafaucet.com/SpecSheet/DSP-B-144938-I%20Rev%20A.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please refer to the link below that specifies which straightener you need. https://media.deltafaucet.com/MandI/107700%20Rev%20M.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Tony71, Thanks so much for contacting Delta Faucet Company about RP51303SS! Yes, the tub spout includes the plastic insert within that is not removed. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Richard, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. Our Delta Faucet Lahara® Tub Spout - Pull-Up Diverter In Champagne Bronze MODEL#: RP51303CZ can be purchased parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Kelley

Hi Basia, Thanks for your question regarding RP51303CZ! The faucet body, spout, and handle are metal. Unfortunately, we do not have a complete breakdown of the materials used; however, metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Quality is of high importance to us, and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Please feel free to contact us directly if you have any questions or need additional assistance. Best Regards, Emma Digital Communications Specialist

Hi Brad5713, Thanks so much for contacting Delta Faucet Company! We currently offer the following tub spouts in the Venetian bronze finish that work with the RP12307 tub spout adapter: RP93376RB, RP42915RB, RP77091RB, RP73371RB, RP72565RB, RP563419RB and RP34357RB. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Jack, thank you for your interest in the RP51303CZ! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Gail, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Lahara® Tub Spout - Pull-Up Diverter In Polished Nickel MODEL#: RP51303PN is not available to purchase online, I have attached a link below to the Where To Buy section on our website. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Gail, Thank you for your question about the Delta Faucet model RP51303 Lahara® Tub Spout - Pull-Up Diverter In Chrome. I apologize for any difficulty finding a brushed nickel spout. I know that can be frustrating. We are happy to help! Yes, the spout model RP51303SS stainless finish will be very similar to brushed nickel. https://www.deltafaucet.com/parts/product/RP51303SS.html Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Jayr2021, Thank you for your question! I am happy to assist you! The Delta Faucet repair part RP51303PN does not include a set screw as it does not have a slip-on connection type. Please contact us back directly with any further questions. Best Regards, Skyler

Hi Mnop, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Our Delta Faucet DELTA® Lahara® Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP51303 is a mixture of metallic and non-metallic material. Quality is important to us, and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Hodgson, Thanks so much for contacting Delta Faucet Company about RP51303CZ! The tub spout should screw back onto the plastic adapter, if the threads are not there, the whole tub spout would need replaced. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi 63140 spout, Thanks so much for contacting Delta Faucet Company! The LAHARA® Tub Spout MODEL#: RP51303PN can sweat onto 1/2" C.W.T. or thread onto 1/2" IPS. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Alllen, Thanks so much for contacting Delta Faucet Company about RP51303SS! The flow rate is not adjustable, the tub spout will provide approx 8-10 GPM depending on the PSI in the home. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Valued Customer, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet part RP51303 Lahara® Tub Spout - Pull-Up Diverter In Chrome includes the plastic insert within to allow the water coming through to shape for aesthetic purposes. Please contact us back directly via email with any further questions. Best Regards, Skyler