Tub Spout - Pull-Up Diverter in Venetian Bronze

Model#: RP52153RB
Tub Spout - Pull-Up Diverter in Venetian Bronze
Model#: RP52153RB
List Price: $189.00
Online Price: $151.20
Free Ground Shipping All Orders $49+
Documents & Specs
Installation Information
Overall Height (in.) :
3-5/32
Valve Type:
NA
REVIEWS
Rated 1 out of 5 by from Learning a tough lesson We have two of these Linden sets in our house built in 2017. Both have been leaking through the diverter and we cannot find any parts to fix them from Delta. Now one of the diverters has completely fallen apart where the plastic knob has come off and we’ve lost parts down the drain. These are nice fixtures for looks but they are not made to the quality we expect from Delta at all.
Date published: 2026-07-18
Rated 1 out of 5 by from Fell apart Unfortunately it fell apart and came down from the shower wall. Pretty much same problem like the other owners of this product.
Date published: 2025-12-05
Rated 1 out of 5 by from Looks can be deceiving Me too. MODEL#: RP52153RB Venetian Bronze tub spout is a good looking product; however, it simply fell off when I turned the water on. A few years back we put Delta throughout our new house based on several decades of great past experiences with Delta products. The RP52153RB is an absolute disappointment. It’s only redeeming quality is that it came with a lifetime warranty.
Date published: 2025-08-20
Rated 2 out of 5 by from HOT MESS This part is hot garbage. We had an internal crack in our's 1 yr after installation. It slowing was leaking running acrossed the face of the shower surrounded.Down to the floor. This was after gutting a closet to find it was even related to any pipes or joint connections. Look it up online for replacement. the part is half of what a whole Delta system cost?
Date published: 2025-02-16
Rated 3 out of 5 by from Diverters broken I seem to have the same problem as the other reviewers. I have this shower/faucet set in 4 of my bathrooms. New construction in 2013. 3 out of 4 of the diverters are broken. One that still functions was moved to a bathroom that is more frequently used. The other 3 can only be used for baths and not showers. This is a huge inconvenience as I have a large family. Anyways I would love to be able to either replace the diverters if possible or be advised if I need to change out the whole spout. I ordered a spout at one point from Amazon but it was too short for this model.
Date published: 2025-02-01
Rated 4 out of 5 by from Love the style I've had this faucet for about 18 years. Finally got it installed 3 years ago after getting the bathroom remodeling completed. Love the style but the diverter is not fully engaging allowing most of the water flow to continue from the faucet instead of the shower head. How hard is it to replace the orings or check to see if the plastic piece inside is broken? I want to keep the faucet. I don't want to change it if I can fix it.
Date published: 2024-12-31
Rated 1 out of 5 by from my problem is related to all the others, except My problem is related to all the others, except I have all the pieces. Mine just came apart and fell in the tub. I have collected all the parts and think I have figured out how it works, but can't figure exactly where the o ring goes and how to get the diverter rod with a point on it to go into it's proper place. All I am asking for is a diagram to show me how to reinstall these parts. I do not believe anything is broken, it just came unscrewed and fell apart. Please help me re-install these parts. If you cannot help me put this back together, please send me a new one complete. Mine is chrome
Date published: 2024-09-07
Rated 3 out of 5 by from Beautiful Tub Spout but Busted Diverter!! First must acknowledge the beautiful aesthetic of the tub spout! Regarding design, I have had this tub spout for 5+ years and it generally has worked pretty well until recently the diverter broke (rubber washer failed and plastic pieces in diverter are cracking) - just from general use. It has been impossible to find a replacement diverter for this tub spout. As a band-aid fix I replaced the rubber washer with one from a generic diverter kit and that worked OK for awhile but the diverter has regressed to failing again. Please Delta - if this exists (a diverter replacement kit) please let me know how I can purchase it! Thanks!!
Date published: 2024-08-12
  • y_2026, m_7, d_27, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_en_US, sid_RP52153RB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 46ms
  • reviews, product
Q&A

What is the bathtub drain kit that goes with this

We are purchasing the full tub and faucet trim kit that includes this spout but we can't locate the drain kit that should be used with this.
Asked by: Remodel2015
Hi Remodel2015, Thank you for your question. The bathtub drain assembly that we offer in the champagne bronze finish is the model 693CZ. http://www.deltafaucet.com/bath/details/rp693cz.html?showPhotoGallery=false Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

RP52153

Can I get the inside parts for the Tub spout /pull up diverter ? My spout is still good ,just broke the inside plastic diverter part
Asked by: Marv
Hi Marv, Thank you for your question. The internal parts to the RP52153SS tub spout are not available as separate items. The entire tub spout will need to be ordered. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

What is the material of Delta Tub Spout - Pull-Up Diverter in chrome? Is it metal or pvc?

Asked by: Charlie
Hi Charlie, Thank you for your question. The RP52153SS tub spout is made with engineered plastics that are designed to meet and exceed industry standards. The product is guaranteed with a lifetime warranty. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

What is the difference in RP52153RB and RP83676RB besides $20.00?

Asked by: John44west
Hello John44west, Thank you for your question. We are happy to help! The Delta RP52153SS Tub Spout Assembly includes the RP12307 adapter assembly and installs by sweating onto 1/2" C.W.T or thread onto 1/2" IPS. The RP83676SS Tub Spout Assembly RP83676SS is a slip-on install. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Does the tub spout a RP52153RB have a warranty? It is 2 years old and can't direct water to shower head.

Asked by: Bill
Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2024-12-04

Is this a screw on assembly

Asked by: Jay1078
Hello, Thank you for your question! Yes, it will thread onto the copper supply line. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-25

The replacement part RP52153RB what size is the part that screws on to the line. I have the part number 6015-1-001 for my old faucet i'm trying to replace.

Asked by: walter
Hi walter, Thank you for your question about the Delta Faucet RP52153RB. This tub spout is installed to 1/2" thread iron pipe or 1/2" copper pipe. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Hello. I trying to figure out if this spout has the larger 1" thread that fits onto the adaptor. My adaptor is already sweated on to 1/2" pipe and I just need to replace the spout cause the divertor had broken inside.

Asked by: Daddyrepair
Hi Customer! Thank you for your question and we are happy to help. The Delta LINDEN™ Tub Spout - Pull-Up Diverter In Venetian Bronze MODEL#: RP52153RB does not have a larger 1" thread. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

Does RP52153 comes with an adaptor or I need to buy one? Could you share installation instructions please?

Asked by: SamZ
Hi SamZ, Thank you for your question regarding our Delta Faucet RP52153. The Delta RP52153SS Tub Spout Assembly includes the RP12307 adapter assembly and installs by sweating onto 1/2" C.W.T or thread onto 1/2" IPS. The RP83676SS Tub Spout Assembly RP83676SS is a slip-on install. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-04-02

How far out from the wall of the shower?

Asked by: Bill
Hi Bill, Thanks so much for contacting Delta Faucet Company about, RP52153SS! The tub spout has a total length of 6 1/4". Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-08

I have the Linden faucet and tub spout that leaks. The plumber that installed the spout said it would be expensive to replace. The spout leaked causing the finished basement ceiling to fall. is there a replacement for this spout?

Asked by: Gman1
Hello Gman1, Thank you for contacting us. I apologize for the leak you are experiencing with your Delta Faucet part RP52153SS Linden™ Tub Spout - Pull-Up Diverter In Stainless. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet part RP52153SS Linden™ Tub Spout - Pull-Up Diverter In Stainless can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please contact us back directly via email with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

Linden/monitor 14 series installed by new home builder is squealing when running the shower.I’m being told that the tub spout diverter is causing the sound. I believe the part number is RP52153 in brushed nickel. Is this part covered by warranty?

Asked by: Nancy
Hi Nancy, Thank you for your question regarding our Delta Faucet RP52153SS. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. We have reached out to you directly by email to further assist you. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

How long is the spout?

Asked by: Travis
Hi Travis, Thank you for your question about the Delta Faucet RP52153SS. The spout length is 6 1/2". From the finished wall to the center of where the water comes out. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-10-02

The plastic cap broke in the diverter for the Linden Tub Spout - Pull-Up Diverter (Model#: RP52153). Do you sell replacement parts for this? If so, how can I order them? Thank you.

Asked by: Help Please
Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP52153. The entire tub spout would need to be replaced. Feel free to contact us directly, so we can further assist you with this matter. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-06-24

Want to order RP52153RB and need to know the dimensions. Also need to know if it includes spout adapter and if so witch type (model number it is)

Asked by: Johnny A
Hello! Thank you for contacting Delta Faucet Company! Our RP52153 includes the RP12307 adapter. It is 6 1/4" inches long. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-11-04

My elderly parents have an RP52153SS spout that been leaking out the back for some time. We tried to find a replacement inner tube and o-rings at our local Lowe’s. We were told to go to you for a warranty replacement. How do I start this process for them?

Asked by: Brad

Can the pull up knob for the shower on the faucet be replaced? This is an older style tub/shower faucet. I would guess over 20 years.

Asked by: Mo Jo
Hi Mo Jo, Thank you for your questions. The pull up diverter on a tub spout can not be replaced. You will need a whole new tub spout. If you have further questions please contact us. Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet Best Regards - Beverly
Answered by: Beverly
Date published: 2024-03-28

I have a tub spout that the plastic insert has broken. The delta spout I have has a 1" connection to supply and all I can find has 1/2 connections. Are 1" still available?

Asked by: jackie
Hi jackie, Thanks so much for contacting Delta Faucet Company! The LINDEN™ Tub Spout MODEL#: RP52153 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have this spout in brushed nickel. The spout leaks and I have been unable to stop the leak. Since this spout is discontinued what would be an alternative replacement spout?

Asked by: sp70
Hello sp70, Thank you for contacting Delta Faucet Company. I am sorry to hear that your Linden™ Tub Spout - Pull-Up Diverter In Polished Nickel MODEL#: RP52153PN is leaking and discontinued, which can be very frustrating. I am so glad that you contacted us, so we can get this taken care of for you! The recommended replacement for the tub spout in PN is RP51303PN, please see the link below. https://www.deltafaucet.com/parts/product/RP51303PN.html Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

I loved this product until today.  My issue is the same as reviewer “areacode270”.  The diverter broke apart as I was trying to use it.  Instructions on how to get it the inside back together would be appreciated. 

Asked by: Emdyer
Hello! Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-10-27

Where can I get the PVC fitting from the spout to the in wall water line? Fittings I am finding does not go all the way in

Asked by: Helpme
Hello Helpme, Thank you for reaching out to Delta Faucet Company! To avoid backflow, we recommend installing our tub spouts to copper or iron galvanized piping if you are installing a shower head and other components. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

Bonjour , l’intérieur du bec de baignoire s’est Cassé : Besoin d’un nouveau Bec au complet , Guaranties à Vie . Model:RP52153   Venetian Bronze : : Benoît Quirion 1830 Embassy dr. Unit 115 :zip :33401,West Palm Beach .Floride .

Asked by: Benoit Quirion
Hi Benoît Quirion, Thanks so much for contacting Delta Faucet Company about RP52153SS! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist
Answered by: DeltaFaucet
Date published: 2024-02-20

I have a tub filler Spout that is leaking. I believe it is the RP52153SS. What is the warranty on this please?

Asked by: Big Al
Hi Big Al! Thank you for your question and we are happy to help. Our warranty is linked below: https://www.deltafaucet.com/warranty With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-11-12

What is the length of this tub spout?

Asked by: vcc66
Hello vcc66, Thank you for your question regarding the Delta Faucet Tub Spout with Pull-Up Diverter, model RP52153SS! Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you as quickly as possible. This tub spout model measures approximately 6 1/4" from the back to the center of the end of the spout. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_7, d_27, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_RP52153RB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 99ms
  • questions, product