Name: Tub Spout - Pull-Up Diverter
Brand: Delta
SKU: RP61357
Price: 71.92 USD
Rating: 4.375 (8 reviews)

How long is this from mounting to end where water flows

Asked by: Jeanninne

Hi Jeanninne, Thanks so much for contacting Delta Faucet Company! I have included a link below to the RP61357 trim kit, with the measurements you are looking for. https://media.deltafaucet.com/SpecSheet/DSP-B-BT13010%20Rev%20I.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

RP12307 adapter is on my pipe from the wall. will this spout screw into that?

Asked by: jarhiker

Hello, Thank you for your question! No, the RP61357 tub spout threads directly onto a 1/2" pipe near the nose. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-15

My tub spout has 3/4 pipe threads with 1 1/4 stub out. Will this faucet work

Asked by: Curtis

Hello! Thank you for contacting Delta Faucet Company! Our RP61357 threads to a 1/2" inch pipe near the nose of the spout. The RP61357 requires the piping to be 3 7/8" inches to 4" inches from the finished wall. Our RP84412 and RP90158 will fit 1/4" inch to 1/2" inch stub out. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Answered by: Delta

Date published: 2025-11-04

How do I tell this is a delta faucet. Ordered from Amazon. No where does it say delta on it or the box. 

Asked by: Michele

Hi Michele, Thank you for your question! Amazon is one of our authorized sellers. Other sellers also use the Amazon site, but if the item shows Ships from and Sold by Amazon, it would be a genuine Delta product. The box should have the part number RP61357, but it may not say Delta on it. Please reach out for further assistance or with any additional questions! Best Regards, Bryan

Answered by: Delta

Date published: 2025-10-17

what is the length of this?

Asked by: Ashb

Hello! Thank you for your question about RP61357. I am happy to help you. This model is a 5-3/8" Diverter Tub Spout. Please contact us back if you have any questions or need further assistance. Best Regards, Natasha Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | .

Answered by: Delta7

Date published: 2024-03-28

What is the range of copper pipe length sticking out from the wall to install the IPS Delta RP61357 tub spout?

Asked by: Meli

Hi Meli, Thanks so much for contacting Delta Faucet Company! If you are threading on the tub spout adapter you will need between 5/8" and 1 5/8". If you are sweating it on you will need 2" to 4" from the wall. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

I want to replace my tub spout. On the copper pipe is an adapter which I think is this: Delta Faucet RP33794 would you be able to tell me what spouts are compatible with this type of adapter. 

Asked by: MScott6288

When I unscrewed my old spout, I noticed the brass adapter with 1” male threads attached to a 1/2” copper pipe. What shower/tub downspout will fit this? 

Asked by: Frog

Hi Frog! Thank you for your question and we are happy to help. The Delta RP61357 tub spout threads directly onto a 1/2" pipe near the nose, any tub spout that is 1/2". An adapter can not be sweated on. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Answered by: Customer Service

Date published: 2024-06-10

Does this have a 3/4 inch thread at the wall mount opening?

Asked by: Ron T

Hi Ron T, Thank you for your question about the Delta Faucet model RP61357. This tub spout threads directly onto a 1/2" pipe near the nose. The tub spout model U1075-PK can fit a 3/4" threaded connection. https://www.deltafaucet.com/bathroom/product/U1075-PK.html Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

My spout appears to be either a Delta or a Classic Do either of these have a set screw or other retainer or do they just unscrew to remove Trying to replace the diverter Thanks

Asked by: Dave

Hello! If there is not a screw on the underside of the spout then it will simply unthread counterclockwise from the wall. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Answered by: Digital Specialist

Date published: 2026-04-27

I need a tub spouts diverter in brush nickel that uses RP12307 and comes with the plastic adapter.

Asked by: R Pa

Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP61357. We offer RP78735SP that is compatible with the adapter. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Answered by: Themar

Date published: 2024-12-05

what are the specs on this? length etc.?

Asked by: Shan

Hi Shan, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. The Delta Faucet Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP61357 technical specifications can be found at the link below. https://media.deltafaucet.com/SpecSheet/DSP-B-142996%20Rev%20D.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Answered by: Customer Service

Date published: 2024-03-28

What is the maximum length 1/2" pipe from the wall that will be acceptable?

Asked by: Saltymermaid

Hi Saltymermaid, Thanks so much for contacting Delta Faucet Company! If you are threading on the RP61357 tub spout adapter, you will need between 5/8" and 1 5/8". If you are sweating it on, you will need 2" to 4" from the wall. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

Is this a universal fit spout? What thread size is required if soldering to a 1/2 inch copper pipe. What is the recommended distance from the wall to the end of the threaded copper pipe?

Asked by: Mario

Hi Valued Customer, Thank you for your question. The Delta RP61357OB Tub Spout Assembly threads directly onto a 1/2" pipe near the nose. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Answered by: Themar

Date published: 2025-03-20

Pipe is 4 inches from the wall with 3/4 tread type diverter to shower is like the picture at the elbow push up for shower...... Having a hard time with Lowes and Home Depot a.s.a.p. on this 35-year-plus-old part... There is no product description...

Asked by: brian

Hi brian, Thank you for your question about the Delta Faucet RP61357. This tub spout installs to 1/2" threads. Our tub spout U1011-PK fits 3/4" threads with the included 3/4" adapter installed flush to the wall. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

What adapter do I use for the rp61357a?

Asked by: Mark

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our RP61357 connects to a 1/2" inch pipe to the nose of the spout. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Answered by: Delta

Date published: 2025-08-23

Hi. I have a question regarding my original being designed with its pull stem being located at the back 1/4 of the spout rather than at the front.  Is the length of 1/2" threaded pipe the same 3+" as RP61357BN?  (All new ones have its stem at front.)

Asked by: Joel

Hi Joel, Thank you for your question about the Delta Faucet RP61357 tub spout. This spout threads to a 1/2" pipe in the nose of the spout. Other tub spouts may not install the same way. Tub spouts with the diverter in the back include RP100196, RP90158PCPR, and RP103401PCPR. Please reach out with any additional questions! Best Regards, Bryan

Answered by: Delta

Date published: 2025-08-29

I have a RP61357OB spout that I need to install over a copper pipe. After cleaning the pipe with emery cloth is there anything else I need to do before installing the spout? Is there a link to instructions?

Asked by: HTC408

Hi HTC408, thank you for your interest in the RP61357! This spout will thread onto a 1/2" copper pipe into the nose of the spout. Please see the tub spout installation instructions below, for the diagram (A). https://www.deltafaucet.com/files/live/sites/delta/files/customer- Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Answered by: Customer Service

Date published: 2023-06-16

Which tub spouts are metal?

Asked by: Bob27

Hi Bob27, Thanks so much for contacting Delta Faucet Company! The RP61357 is made of metal construction. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

I bought a Delta Foundations tub & shower kit. Can I remove the plastic slip on adapter from the spout & screw it on my pipe directly?

Asked by: Julie N

Hi Julie N, Thank you for contacting Delta Faucet Company! Our RP61357BN threads directly onto a 1/2" inch copper or iron galvanized pipe, near the nose of the spout. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-09-09

I have a Delta RP5834 Chrome and I want to replace it with brush nickel but cannot find a product that fits can you please help me

Asked by: Susan

Hello Susan! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The best replacement for the Delta Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP5834 would be the CLASSIC Classic Tub Spout - Pull Up Diverter In Stainless MODEL#: RP101727SS as we do not have a diverter in Brushed Nickel. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Answered by: Delta7

Date published: 2024-03-28

I have an old Masco 32192. I need a replacement in oil rubbed bronze. Is this a good choice?

Asked by: Tommylovesangel808

Hi Tommylovesangel808, Thanks so much for contacting Delta Faucet Company! The Tub Spout MODEL#: RP61357OB sweats onto 1/2 in. CWT or threads onto 1/2 in. IPS. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Answered by: Customer Service

Date published: 2023-03-20

I need a tub spout in brushed nickel that uses the RP12307 adapter that has been sweated to 1/2" copper. I want to unscrew the old spout and just screw on the new one. Do you have this spout in brushed nickel?

Asked by: johnbj

Hi johnbj! Thank you for your question! Unfortunately the RP61357 is the only tub spout we manufacture in the brushed nickel finish at this time. Best Regards, Tim

Answered by: Delta

Date published: 2024-03-28

Will this tub spout screw on to 1 3/4 inch long stub out that is only threaded on the tip

Asked by: Pmaten

Hello! The maximum distance from the wall is 1 5/8". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Answered by: Digital Specialist

Date published: 2026-07-01

Is this a metal tub spout or a plastic tub spout or is the only part of the spout that is metal is the pull up diverter ?

Asked by: Steve

Hi Steve, Thank you for your question. The Delta model RP61357OB is of metallic construction. Best Regards, Simone

Answered by: Simone

Date published: 2024-03-28

Does this come with the thread?

Asked by: Lanae

Hi Lanae, Thank you so much for contacting Delta Faucet Company! The Delta RP61357BN threads directly onto a 1/2" pipe near the nose and does not use any adapter for the install. Please reach out with further questions! Best Regards, Skyler Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

Do you have RP61357BN with the RP5834 adaptor? The brass adaptor has been welded to the water pipe coming from the wall and cannot be removed without causing other issues. Do you sell the adaptor separately?

Asked by: RP5834 adaptor issues

Does this come with FIP threads?

Asked by: Jen7

Hi Jen7, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Tub Spout - Pull-Up Diverter In Oil Rubbed Bronze MODEL#: RP61357OB has female threads in the nose of the spout and will thread onto a male 1/2" iron pipe. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Answered by: Customer Service

Date published: 2024-03-28

Hi im have order this part from lowes and they only sent me outside of the spout. Where can I find the inside piece of the spout the plastic pipe which connects to the main water pipe and the rings which hold the pipe.

Asked by: Kaka G

Hi Kaka G, Thanks so much for contacting Delta Faucet Company! The RP61357OB threads directly onto the 1/2" pipe, there are no extra internal parts needed for installation. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

What about the inside parts? This piece is hollow

Asked by: Lizz

Hello Lizz, Thank you for contacting us, I am happy to help you. The Delta RP77091OB tub spout threads directly onto a 1/2" pipe near the nose. Please contact us back for any further questions. Best Regards, Nicole

Answered by: Delta7

Date published: 2024-03-28

Browse Bathroom Collections

Tub Spout - Pull-Up Diverter in Chrome

Installation Information

How long is this from mounting to end where water flows

RP12307 adapter is on my pipe from the wall. will this spout screw into that?

My tub spout has 3/4 pipe threads with 1 1/4 stub out. Will this faucet work

How do I tell this is a delta faucet. Ordered from Amazon. No where does it say delta on it or the box.

what is the length of this?

What is the range of copper pipe length sticking out from the wall to install the IPS Delta RP61357 tub spout?

I want to replace my tub spout. On the copper pipe is an adapter which I think is this: Delta Faucet RP33794 would you be able to tell me what spouts are compatible with this type of adapter.

When I unscrewed my old spout, I noticed the brass adapter with 1” male threads attached to a 1/2” copper pipe. What shower/tub downspout will fit this?

Does this have a 3/4 inch thread at the wall mount opening?

My spout appears to be either a Delta or a Classic Do either of these have a set screw or other retainer or do they just unscrew to remove Trying to replace the diverter Thanks

I need a tub spouts diverter in brush nickel that uses RP12307 and comes with the plastic adapter.

what are the specs on this? length etc.?

What is the maximum length 1/2" pipe from the wall that will be acceptable?

Is this a universal fit spout? What thread size is required if soldering to a 1/2 inch copper pipe. What is the recommended distance from the wall to the end of the threaded copper pipe?

Pipe is 4 inches from the wall with 3/4 tread type diverter to shower is like the picture at the elbow push up for shower...... Having a hard time with Lowes and Home Depot a.s.a.p. on this 35-year-plus-old part... There is no product description...

What adapter do I use for the rp61357a?

Hi. I have a question regarding my original being designed with its pull stem being located at the back 1/4 of the spout rather than at the front.  Is the length of 1/2" threaded pipe the same 3+" as RP61357BN?  (All new ones have its stem at front.)

I have a RP61357OB spout that I need to install over a copper pipe. After cleaning the pipe with emery cloth is there anything else I need to do before installing the spout? Is there a link to instructions?

Which tub spouts are metal?

I bought a Delta Foundations tub & shower kit. Can I remove the plastic slip on adapter from the spout & screw it on my pipe directly?

I have a Delta RP5834 Chrome and I want to replace it with brush nickel but cannot find a product that fits can you please help me

I have an old Masco 32192. I need a replacement in oil rubbed bronze. Is this a good choice?

I need a tub spout in brushed nickel that uses the RP12307 adapter that has been sweated to 1/2" copper. I want to unscrew the old spout and just screw on the new one. Do you have this spout in brushed nickel?

Will this tub spout screw on to 1 3/4 inch long stub out that is only threaded on the tip

Is this a metal tub spout or a plastic tub spout or is the only part of the spout that is metal is the pull up diverter ?

Does this come with the thread?

Do you have RP61357BN with the RP5834 adaptor? The brass adaptor has been welded to the water pipe coming from the wall and cannot be removed without causing other issues. Do you sell the adaptor separately?

Does this come with FIP threads?

Hi im have order this part from lowes and they only sent me outside of the spout. Where can I find the inside piece of the spout the plastic pipe which connects to the main water pipe and the rings which hold the pipe.

What about the inside parts? This piece is hollow

Browse Bathroom Collections

Tub Spout - Pull-Up Diverter in Chrome

Installation Information

How long is this from mounting to end where water flows

RP12307 adapter is on my pipe from the wall. will this spout screw into that?

My tub spout has 3/4 pipe threads with 1 1/4 stub out. Will this faucet work

How do I tell this is a delta faucet. Ordered from Amazon. No where does it say delta on it or the box.&nbsp;

what is the length of this?

What is the range of copper pipe length sticking out from the wall to install the IPS Delta RP61357 tub spout?

I want to replace my tub spout. On the copper pipe is an adapter which I think is this: Delta Faucet RP33794 would you be able to tell me what spouts are compatible with this type of adapter.&nbsp;

When I unscrewed my old spout, I noticed the brass adapter with 1&rdquo; male threads attached to a 1/2&rdquo; copper pipe. What shower/tub downspout will fit this?&nbsp;

Does this have a 3/4 inch thread at the wall mount opening?

My spout appears to be either a Delta or a Classic Do either of these have a set screw or other retainer or do they just unscrew to remove Trying to replace the diverter Thanks

I need a tub spouts diverter in brush nickel that uses RP12307 and comes with the plastic adapter.

what are the specs on this? length etc.?

What is the maximum length 1/2&quot; pipe from the wall that will be acceptable?

Is this a universal fit spout? What thread size is required if soldering to a 1/2 inch copper pipe. What is the recommended distance from the wall to the end of the threaded copper pipe?

Pipe is 4 inches from the wall with 3/4 tread type diverter to shower is like the picture at the elbow push up for shower...... Having a hard time with Lowes and Home Depot a.s.a.p. on this 35-year-plus-old part... There is no product description...

What adapter do I use for the rp61357a?

Hi. I have a question regarding my original being designed with its pull stem being located at the back 1/4 of the spout rather than at the front. &nbsp;Is the length of 1/2&quot; threaded pipe the same 3+&quot; as RP61357BN? &nbsp;(All new ones have its stem at front.)

I have a RP61357OB spout that I need to install over a copper pipe. After cleaning the pipe with emery cloth is there anything else I need to do before installing the spout? Is there a link to instructions?

Which tub spouts are metal?

I bought a Delta Foundations tub &amp; shower kit. Can I remove the plastic slip on adapter from the spout &amp; screw it on my pipe directly?

I have a Delta RP5834 Chrome and I want to replace it with brush nickel but cannot find a product that fits can you please help me

I have an old Masco 32192. I need a replacement in oil rubbed bronze. Is this a good choice?

I need a tub spout in brushed nickel that uses the RP12307 adapter that has been sweated to 1/2&quot; copper. I want to unscrew the old spout and just screw on the new one. Do you have this spout in brushed nickel?

Will this tub spout screw on to 1 3/4 inch long stub out that is only threaded on the tip

Is this a metal tub spout or a plastic tub spout or is the only part of the spout that is metal is the pull up diverter ?

Does this come with the thread?

Do you have RP61357BN with the RP5834 adaptor? The brass adaptor has been welded to the water pipe coming from the wall and cannot be removed without causing other issues. Do you sell the adaptor separately?

Does this come with FIP threads?

Hi im have order this part from lowes and they only sent me outside of the spout. Where can I find the inside piece of the spout the plastic pipe which connects to the main water pipe and the rings which hold the pipe.

What about the inside parts? This piece is hollow

How do I tell this is a delta faucet. Ordered from Amazon. No where does it say delta on it or the box.

I want to replace my tub spout. On the copper pipe is an adapter which I think is this: Delta Faucet RP33794 would you be able to tell me what spouts are compatible with this type of adapter.

When I unscrewed my old spout, I noticed the brass adapter with 1” male threads attached to a 1/2” copper pipe. What shower/tub downspout will fit this?

What is the maximum length 1/2" pipe from the wall that will be acceptable?

Hi. I have a question regarding my original being designed with its pull stem being located at the back 1/4 of the spout rather than at the front. Is the length of 1/2" threaded pipe the same 3+" as RP61357BN? (All new ones have its stem at front.)

I bought a Delta Foundations tub & shower kit. Can I remove the plastic slip on adapter from the spout & screw it on my pipe directly?

I need a tub spout in brushed nickel that uses the RP12307 adapter that has been sweated to 1/2" copper. I want to unscrew the old spout and just screw on the new one. Do you have this spout in brushed nickel?