Foundations®
Tub Spout - Non-Diverter in Stainless
Model#:
RP64722SS
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
The sculpted curves of this Foundations Non-Diverter Tub Spout bring a whimsical touch to the bath. Getting ready in the morning is far from routine when you are surrounded by a bath that reflects your personal style. You can count on Delta reliability throughout the home, including our accessories and repair parts. We back each and every item with our lifetime limited warranty.
- Perfectly coordinates with the Foundations bathroom collection (sold separately)
- Non-diverting
- 7 in. total length
- Slip onto 1/2 in. C.W.T.
- Removable threaded adapter for 1/2 in. IPS
- Metallic construction
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Resources
Installation Information
Overall Height (in.) :
2-1/2
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
OG Bob from
Added length was bonus
[This review was collected as part of a promotion.] The stock split that arrived was too short and also had the diverter built in. To correct this issue we ordered and installed the Delta spout. It fit and worked perfectly.
Date published: 2026-03-15
Rated 5 out of
5
by
DMBK from
Delta Tub Filler - Wall Mounted
[This review was collected as part of a promotion.] classic tub filler, perfect for what we needed
Date published: 2025-12-12
Rated 5 out of
5
by
LKendrick from
Good quality at a reasonable price
Good simple quality tub spout at a reasonable price.
Date published: 2025-06-30
Rated 1 out of
5
by
Miaxara from
Nice products, lousy customer service
We ordered this faucet for our bathroom remodel, and decided we wanted a different style. Their reply to my request for a return was just a request to post a review and share my thoughts, so here it is: Their customer service sucks.
Date published: 2022-09-21
Q&A
What material are these made of? Will they corrode over time?
Hi, John R!
Thank you for your question. The Delta RP64722SS tub spout assembly is metallic. Please know that all of our products are tested to ensure long-lasting use and have a Lifetime Limited Warranty.
Best Regards,
Rosanna
Date published: 2024-03-28
Whar decorative flange/escutcheon would go with this?
Purchase this tub spout in oil-rubbed bronze. Looking for a flange, escutcheon or decorative ring to add some flare to it. SuAny suggestions?
Thank you for your question, Rick. Unfortunately, we do not make a flange or escutcheon for the tub spout.
Best regards,
Jon
Date published: 2024-03-28
Where are the threads?
My pipe extends 7 1/4 inches from the wall. Are the threads near where the water comes out or near the wall end?
Thank you for your question, Mike. The threads are in the nose of the spout. It will thread onto a 1/2" IPS nipple that extends 3 7/8" – 4” from the wall.
Best regards,
Jon
Date published: 2016-09-08
Will this tub spout screw on to a 3/4" steel pipe appx 4 inches past the wall?
Hi, Neil!
Thank you for your question. The Delta RP64722 tub spout assembly will thread onto a 1/2" IPS nipple that extends 3 7/8" – 4” from the wall.
Best Regards,
Rosanna
Date published: 2024-03-28
total reach of this spout?
how far from the wall does this spout reach? and does the .5" nipple screw in at the front of the spout?
Hi Sandy, Thank you for your question. The RP64722 spout measures 7" total length. The spout has a removeable adapter that will leave you with a 1/2" IPS connection at the front of the spout.
Thanks,
Dave
Date published: 2024-03-28
Lenght from wall to thread
Looking for a Stainless Steel non diverter tub spout. From the wall to the thread needs to be 3-1/4 inches. Will this work?
Hi Colton, Thank you for your question. The RP64722 tub spout can slide onto 1/2" copper pipe, or with the adapter removed thread onto 1/2" threaded pipe. The recommended pipe length from the finished wall to the end of the threads is 3-7/8" to 4". We do not offer a spout that would work with your existing pipe length.
Thanks,
Dave
Date published: 2024-03-28
where can i find an installation manual for installing the spout on copper pipe?
Hello!
The Delta RP64722 tub spout assembly will thread onto a 1/2" IPS nipple that extends 3 7/8" – 4” from the wall.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-05-02
What is the diameter of the spout at the wall?
Hello Chas,
Thanks for the question. The diameter of the RP64722SS tub spout at the wall is 2 1/2".
Best Regards,
Yvette
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.