Tub Spout - Pull-Up Diverter in Champagne Bronze
Model#:
RP73371CZ
Image Thumbnail, click to view zoomed product image
null
PRODUCT FEATURES
This Trinsic 6-1/8 in. Pull-Up Diverter Tub Spout perfectly complements the Trinsic bathroom collection. You can count on Delta reliability throughout the home, including our accessories and repair parts. We back each and every item with our lifetime limited warranty.
- Coordinates with Trinsic bathroom collection (sold separately)
- Pull up to divert
- 6-1/8 in. total length
- Slip-on spout for ½ in. C.W.T.
- Durable non-metallic construction
- RP33794 adapter assembly included
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
Overall Height (in.) :
3-7/32
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
GigB from
Looks great... works not so great
I'm writing this on behalf of my girlfriend who actually owns the Delta tub & shower unit, but I'm the one who removed the tub spout from the wall to find out why it suddenly stopped diverting. I actually sold Delta hardware years ago, so I told her I'd take a look for her. It turns out that the sealing gasket for the diverter gate was shot, only two years after installation. Although it's been a lot of years since selling Delta fixtures, Ii absolutely remember the quality of the builds being much better back then, with parts rarely wearing out under anything but extreme usage. As a previous reviewer mentioned, "Delta, do better".
Date published: 2026-06-06
Rated 1 out of
5
by
Lauren from
They don't make em like they used to!
This stopped diverting properly after two years. I needed to replace it.
Date published: 2025-12-17
Rated 5 out of
5
by
LRick from
Great Tub Spout
[This review was collected as part of a promotion.] We needed a tub spout to coordinate with a shower trim our clients purchased on their own. It matched perfectly and was easy to install.
Date published: 2025-10-16
Rated 5 out of
5
by
Jd from
Updated 80’s Bath
[This review was collected as part of a promotion.] Replaced and updated all the fixtures in our 80’s upstairs bath in this matte black. It now looks like a new bathroom. I really like the look and they don’t show water spots and haven’t chipped so far.
Date published: 2025-10-10
Rated 5 out of
5
by
JS from
Good Product but opt for built in diverter on shower valve if possible!
[This review was collected as part of a promotion.] The product is nice and the plating looks to be well done. Not a fan of the pull tab type spouts but that is all that would work with this shower set up.
Date published: 2025-10-10
Rated 5 out of
5
by
Les from
Bathroom fixtures
All Delta products I have ordered are well made, do not scratch , easily installed and performance & design is superior.
Date published: 2025-09-13
Rated 5 out of
5
by
drew from
look/works great
[This review was collected as part of a promotion.] works as it should, pairs with the the other delta trims we got with it
Date published: 2025-07-18
Rated 5 out of
5
by
1 from
Always a good option
[This review was collected as part of a promotion.] Just had the spout installed by my contractor & it seems to be great quality!
Date published: 2025-07-18
Q&A
Specifically the dimension of the neck. I'm trying to make sure this will be long enough to be on the wall and reach past the deck of a my tub
Hi KR,
Thank you for your inquiry! The Delta Trinsic Diverter Tub Spout RP73371BL is 6 3/16" (157 mm) long.
https://media.deltafaucet.com/SpecSheet/DSP-B-T17059%20Rev%20G.pdf
Best regards,
Tanya
Date published: 2024-03-28
Is RP73371RB still available or is it being discontinued?
Hi, Ashley!
Thank you for your question. The Delta RP73371RB tub spout assembly is still being manufactured and can still be ordered. It is not being discontinued at this time.
Best Regards,
Rosanna
Date published: 2024-03-28
Does this tub spout need to be soldered to a copper pipe? Or is the O-rings and set screw enough?
Thank you for your question, Chris. This tub spout is designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw only.
Best regards,
Jon
Date published: 2024-03-28
I have purchased the above item but it doesn’t look like there is an internal O-ring to utilize the slide on method as described. I see only 2 tiny o-rings....one at the diverter end and one the same size immediately next to it. Am I missing an o-ring!
Hi, RJCwake!
Thank you for your question. This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen on page 5 module 2 C-1 of the maintenance and installation manual (link below). The o-ring inside the tub spout will provide a proper seal.
https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf
Best Regards, Rosanna
Date published: 2024-03-28
Where are the documents and installation instructions? Come on...
It is 2017, get your website in order.
Dear Brad,
Thank you for your inquiry! The RP73371SS is the tub spout that comes with the Trinsic 14 Series Tub and Shower T14459-SS model. The tub spout will include a brass slip-on adapter (RP33794) that you can remove from the tub spout. The 1/2" copper pipe should extend 2" to 4" from the finished wall. Install the adapter so that there is a 1/4" to 1/2" between the adapter and the finished wall. Tighten the set screw, then thread the tub spout onto the adapter. Please page 5 of the below Maintenance/Installation document link, for these directions.
https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf
Best regards,
Tanya
Date published: 2024-03-28
Is this rear threaded and not require a nipple extender?
Hi, Luke! Thank you for your question. Delta part number RP73371RB tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw.
Best regards,
Themar
Date published: 2024-03-28
What is the diameter of the back round piece that sits against the wall?
Thank you for your inquiry, Stephanie! The back flange of the Delta Trinsic Tub Spout RP73371BL has a diameter of 3 3/16" (81 mm).
Best regards,
Tanya
Date published: 2024-03-28
Can I install this unit on plastic tubing, (PEX)?
Hi Johnny,
Thank you for your question. This spout will only work with 1/2" copper tubing.
Best regards,
Jon
Date published: 2024-03-28
installation instructions?
Thank you for your inquiry, David! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen on page 5 module 2 C-1 of the maintenance and installation manual (link below). The o-ring inside the tub spout will provide a proper seal.
https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf
Best regards,
Tanya
Date published: 2024-03-28
What material is this made of?
Is it metal?
Hi Noplastic, Thank you for your question. The RP73371 is not a metal tub spout.
Thanks,
Dave
Date published: 2024-03-28
Tub spout I purchased, marked 00125-773502 L-2-3, came with adaptor. Manual page 5, C-4, suggests soldering adaptor to copper. But it has an inner O-ring, therefore can't solder. Or is it a slip-on as in C-1? Is that O-ring is enough of a seal?
Thank you for your question, Wayne! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen in C-1 of the maintenance and installation manual. The o-ring inside the tub spout will provide a proper seal.
https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf
Best regards, Edward
Date published: 2024-03-28
is this metal or plastic construction? thanks.
Hi sherysweetie,
Thank you for your question. This tub spout is non-metallic.
Best regards,
Jon
Date published: 2017-04-04
I purchased the Trinsic Thermostatic Shower System with Shower Head, Shower Arm, Hand Shower, Slide Bar, Hose, Valve Trim and MultiChoice Rough-In from Ferguson Builder. I want to add a tub faucet. Do i need any other components or can i just buy this?
Hi Chand!
Thank you for contacting us at Delta Faucet! I will be happy to help. You can purchase the tub spout but keep in mind you will need a diverter trim kit installed so as to divert water between the shower head and hand shower. Please contact us directly if further assistance is needed at this time.
Best Regards,
Tim
Date published: 2024-03-28
Hello, is there an aerator in this spout that I can remove/clean to improve flow? The shower has not been used for an extended time and the flow is very low.
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP73371CZ. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
The tub spout does not have an aerator.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-02-21
IS THIS TUB SPOUT MADE OF METAL OR PLASTIC?
Hi RGG82,
Thank you for your question about the Delta Faucet RP73371CZ.
The tub spout is plastic for a durable non-metallic construction.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-04-17
Could you tell me delivery date for Trinsic Tub Spout with diverter in champagne bronze?
Hi tub spout delta site,
Thanks so much for contacting Delta Faucet Company about RP73371CZ! Our standard delivery is 8-10 business days.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-01-31
After about 5 years, the diverter pull doesn't catch the shower without holding it up for a while, adjusting pressure until the water is fully diverted to the shower. Is the pull broken? Or is there a way to replace the part?
Water is coming out between the wall and escutcheon . Adapter is tight but the escutcheon is not flush to the wall
Hi Helpme,
Thanks so much for contacting Delta Faucet Company about, RP73371!
This tub spout is designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw. Verify the proper installation on page 5.
https://media.deltafaucet.com/MandI/107700%20Rev%20H.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-04-04
I need a replacement set screw for the Delta Delta Delta Trinsic 6-1/8" Diverter Wall Mounted Tub Spout Model: RP73371 6-1/8" Diverter Wall Mounted Tub Spout Model: RP73371 What size is it? I might be able to get one from Ace Hardware quickly.
Regarding the RP73371s Pull-Up Diverter. The diverter seal, and rubber is defective. Can you please provide me a part number for a diverter spout replacement with rubber only? Thank you,
Hi Palko,
Thank you for your question about the Delta Faucet RP73371.
Unfortunately, we don't carry replacement parts for the pull-up diverter. The tub spout may need to be replaced.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-05-27
Hi, What is the warranty on this item?
Hi Valued Customer,
Thank you for contacting us, I would be happy to help you.
Our warranty is, All parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. I have included a link below for the warranty information.
https://www.deltafaucet.com/service-parts/warranty
Please contact us back if you have any questions or need further assistance.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
Date published: 2025-09-25
Are all of your tub spouts and the 2 in 1 shower heads plastic?? I was fully expecting that they would be metal, but recently bought a set where the majority of the pieces are plastic.
Hello jlt1992!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. Delta tub faucets are made of several materials which may include but are not limited to Bronze, Brass, Zinc, Stainless Steel, Copper, PEX-C, Silicon, Synthetic rubber, Vinyl, Nylon, and, Plastics. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
Does this faucet have a flow restrictor?
Hi TBird,
Thank you for contacting us at Delta Faucet!
This Delta Faucet RP73371BL does not feature a flow restrictor.
Please contact us directly if further assistance is needed at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
I am looking for a matching delta tub drain and overflow in matte black to match the rest of the delta pieces in my bathroom, but have so far been unsuccessful. Can someone please let me know how to obtain these items? Thank you.
Hi ejpilot,
Thanks so much for contacting Delta Faucet Company about RP73371BL!
We do not currently manufacture a bath waste in Matte Black, and we do not have any recommendations for 3rd party drains. I am sorry for any inconvenience this may have caused.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
The instructions that came in the box for T14459-BLLHD say I need to use the adapter. the instructions on this website say I don’t and can just slip it on to copper tubing. Please advise which is correct.
Hi Matt,
Thank you for your question about the Delta Faucet RP73371BL Trinsic® Tub Spout - Pull-Up Diverter In Matte Black. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help!
This spout should include the RP33794 slip-on adapter. First, install the adapter and tighten the set screw, then screw the spout onto the adapter.
Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Can the flow rate be increased on this model?
Hi Dave,
Thanks so much for contacting Delta Faucet Company!
No, there isn't a way to increase the flow rate of the TRINSIC® Tub Spout MODEL#: RP73371BL.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
Hello, is it possible to use this tub spout for a bath with no shower? In other words, I do not need a diverter but don't see a chrome trinsic spout without the diverter.
Hi Lorri,
Thanks so much for contacting Delta Faucet Company!
This tub spout can be used for a tub-only application but please see the following link for the Trinsic non-diverting tub spout.
https://www.deltafaucet.com/bathroom/product/RP77350.html?utm=delta
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
I was given the part number RP93273 for this tub spout will this one work RP33794?
Dear Deanna,
Thank you for your question! I will be happy to assist.
The tub spout RP93273 uses a tri-universal adapter. The RP73371 uses RP33794 which is a slip-on adapter.
Please contact us back if you need further assistance.
Best regards,
Kyra
Date published: 2024-03-28
Can I buy a replacement set screw? What is the part number and what size dimensions do I need?
Hello!
Thank you for contacting Delta Faucet Company!
The RP73371 set screw is available with the adapter, RP33794. The set screw is a #1/4-28 x .250" screw.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2025-11-03
I have a Delta Trinsic 6-1/8" Diverter Wall Mounted Tub Spout, Model: RP73371. It is very loose, meaning that I can move the spout side to side and up and down at least 1/8 of an inch and maybe more. I tried caulking it, but there is too much play.
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.