Tub Spout - Pull-Up Diverter in Champagne Bronze
Model#:
RP73371CZ
Image Thumbnail, click to view zoomed product image
null
PRODUCT FEATURES
This Trinsic 6-1/8 in. Pull-Up Diverter Tub Spout perfectly complements the Trinsic bathroom collection. You can count on Delta reliability throughout the home, including our accessories and repair parts. We back each and every item with our lifetime limited warranty.
- Coordinates with Trinsic bathroom collection (sold separately)
- Pull up to divert
- 6-1/8 in. total length
- Slip-on spout for ½ in. C.W.T.
- Durable non-metallic construction
- RP33794 adapter assembly included
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
Overall Height (in.) :
3-7/32
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
GigB from
Looks great... works not so great
I'm writing this on behalf of my girlfriend who actually owns the Delta tub & shower unit, but I'm the one who removed the tub spout from the wall to find out why it suddenly stopped diverting. I actually sold Delta hardware years ago, so I told her I'd take a look for her. It turns out that the sealing gasket for the diverter gate was shot, only two years after installation. Although it's been a lot of years since selling Delta fixtures, Ii absolutely remember the quality of the builds being much better back then, with parts rarely wearing out under anything but extreme usage. As a previous reviewer mentioned, "Delta, do better".
Date published: 2026-06-06
Rated 1 out of
5
by
Lauren from
They don't make em like they used to!
This stopped diverting properly after two years. I needed to replace it.
Date published: 2025-12-17
Rated 5 out of
5
by
LRick from
Great Tub Spout
[This review was collected as part of a promotion.] We needed a tub spout to coordinate with a shower trim our clients purchased on their own. It matched perfectly and was easy to install.
Date published: 2025-10-16
Rated 5 out of
5
by
Jd from
Updated 80’s Bath
[This review was collected as part of a promotion.] Replaced and updated all the fixtures in our 80’s upstairs bath in this matte black. It now looks like a new bathroom. I really like the look and they don’t show water spots and haven’t chipped so far.
Date published: 2025-10-10
Rated 5 out of
5
by
JS from
Good Product but opt for built in diverter on shower valve if possible!
[This review was collected as part of a promotion.] The product is nice and the plating looks to be well done. Not a fan of the pull tab type spouts but that is all that would work with this shower set up.
Date published: 2025-10-10
Rated 5 out of
5
by
Les from
Bathroom fixtures
All Delta products I have ordered are well made, do not scratch , easily installed and performance & design is superior.
Date published: 2025-09-13
Rated 5 out of
5
by
drew from
look/works great
[This review was collected as part of a promotion.] works as it should, pairs with the the other delta trims we got with it
Date published: 2025-07-18
Rated 5 out of
5
by
1 from
Always a good option
[This review was collected as part of a promotion.] Just had the spout installed by my contractor & it seems to be great quality!
Date published: 2025-07-18
Q&A
I bought a delta tub spout 00125-773502. It came with a copper sweat valve but I am wondering if this is required or is it a slip on installation?
Hello Dank,
Thank you for your question! I am happy to assist you!
The Delta Faucet model RP73371BL tub spout has a 1/2" slip on installation. The brass adapter included with it is required for proper installation.
Please contact us back with any further questions.
Best Regards,
Skyler
Date published: 2024-03-28
Is this tub spout compatible with the Delta Vesna shower threads and trim? Our tub spout diverter is not working properly with the seal. Looking for a new spout that will work with our threads and trim.
Hi Campsarah,
Thank you for your question about the Delta Faucet model RP73371. This tub spout includes a sweat/slip on adapter.
It will also fit the sweat/thread on adapter used by the Vesna tub spout RP78735.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Date published: 2025-08-20
What is the connection
Hi mveivia,
Thanks so much for contacting Delta Faucet Company about, RP73371!
The tub spout includes the RP33794 adapter, which allows for a 1/2" slip on connection.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-02-10
We have RP73371 spout. Adapter RP33794 included. Instructions Pg 5, C-1 do not indicate using the adapter for slip on install. White insert in spout does not have set screw. Adapter appears to only screw on spout with o-ring toward wall. Is this correct?
Thank you for your question, Melody! The RP33794 adapter would need to be installed, with the o ring on the front, and the set screw and threads on the back side of the RP73371 tub spout.
Best Regards, Benjamin
Date published: 2024-03-28
I just installed the trinsic tub spout with shower diverter. But when the bath is on, the pressure causes the shower to turn on a bit. it appears there is a black plastic obstruction preventing the tub spout water to flow freely. Can I cut that out?
Good afternoon Mitchellized,
Thank you for your question. We are happy to help!
The shower rise, or stacking, you are describing with your Delta Faucet RP73371BL tub spout can be caused by several reasons. The tub spout should not be restricting the water and we would not recommend cutting the tub spout.
1) The valve could be upside down.
2) The length from the valve to the tub spout is outside of the 8" to 18" distance.
3) Something other than ½" smooth copper or galvanized pipe was used going to the spout. No push fittings. No "shark-bite" fittings. No cast or drop ear elbows.
4) Something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage.
Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you!
Best regards,
Bryan
Date published: 2024-03-28
Hi, We Just purchased a T14459-RB Del Trinsic Tub & Shower trim Mon 14 from an authorized dealer, not arrived yet. Will the matching tub drain & overflow plate come with this purchase? If not how can I order these both to match my purchase? Thanks, Judy
Hello Judy,
Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer.
The Delta Faucet model T14459-RB Monitor® 14 Series H2Okinetic® Tub & Shower Trim does not include a drain assembly and overflow plate. The Delta Faucet part RP693RB Bath Waste Assembly is recommended for a tub drain with the overflow and can be ordered separately.
Please contact us back directly via email with any further questions.
Best Regards,
Skyler
Date published: 2024-03-28
Does this part replace 00125-773502 L-1-3? If not, what does?
Hi Rick,
Thank you for your question about the Delta Faucet RP73371SS tub spout.
Unfortunately, we will need more information to assist you. 00125-773502 L-1-3 is not a Delta model or part number.
This tub spout includes the RP33794 adapter for a 1/2" copper pipe with a slip-on or sweat connection.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2025-05-19
I purchased model RP73371BL. It came with a brass slip on adaptor for 1/2 inch copper pipe. The instructions do NOT include details for this adaptor. I know how to attach the adaptor and spout, but need to know how long the copper pipe needs to be.
Thank you for your question, David! I have included a link to a maintenance and installation sheet, that covers several tub spouts we manufacture. For installation instructions on model RP73371, please refer to page 5, diagram C1. If you need further assistance, feel free to contact us directly.
https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf
Best Regards,
Frank
Date published: 2024-03-28
Is there a part number for just the screw on pull up diverter in venetian bronze for model RP73371RB?
Hello Kyle,
Thank you for your question, I am happy to help you.
The diverter parts are not available by themselves, the whole tub spout would have to be replaced.
Please contact us back for any further questions or concerns.
Best Regards, Nicole
Date published: 2024-03-28
Hello, I purchased the RP73371 Tub Spout Diverter about a year ago. The diverter now struggles to hold water pressure when changing from tub to shower flow. Can I order replacement replacement parts for this diverter? I believe the cup washer is bad.
Hello Customer!
Thank you for your question and we are happy to help. Unfortunately, there are no available parts to repair the Delta RP73371. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2025-04-23
What size allen wrench and is it the same size screw for the piece that is flush against the shower wall?
Hi Valued Customer,
Thank you for your question.
The Delta Faucet part RP33794 Adapter - Tub Spout - Slip-On Diverter included with the Delta Faucet part RP73371BL Trinsic® Tub Spout - Pull-Up Diverter In Matte Black has a set screw that measures #1/4-28 x .250".
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2025-10-31
I’m having an issue with diverting water to the shower head. Is there a way to get to the O-ring on the pull up? I can’t find a way to “get up in there” since there’s a plastic piece blocking the spout that seems immovable and the stem is deep.
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.