Compel®
Tub Spout - Pull-Up Diverter
Model#: RP73372
Tub Spout - Pull-Up Diverter
Compel®
Tub Spout - Pull-Up Diverter
Model#: RP73372
Finish: Chrome
List Price: $71.10
Free Shipping on All Orders $49+
Availability: Out of stock
PRODUCT FEATURES
California Prop 65 WARNING
SUPPORT
Installation Information
Over All Height :
2-1/2
Connection Type :
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 8ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Back mount? Trajectory of water?

Want to know mounting specs on this item - hopefully back mount. Also wanted to know angle of water spray - hopefully 45 degrees giving me an additional trajectory towards outward and not directly down. I need additional clearance from overflow and angle wall of a Jacuzzi deck mount tub.
Asked by: Ann (name only)
Hi Ann, Thank you for your question. the RP73372 tub spout does mount from the back. I have attached an installation manual for a faucet trim that uses the spout. The water will traject out at an angle but the household water pressure will determine the distance. Thanks, Dave http://www.deltafaucet.com/customersupport/documentation/t14461.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Answered by: DeltaFaucet2
Date published: 2014-05-12

Installation Manuel for RP73372

Please send me the installation Manuel for rp73372. Thanks Alan
Asked by: Alan
Hi Alan, Thank you for your question. I have attached the manual for the complete Compel tub/shower installtion. On page 5, step C-3 covers installing the spout on galvanized pipe. Step C-4 covers the tub spout installation sweating onto copper pipe. Thanks, Dave http://www.deltafaucet.com/customersupport/documentation/t17461.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Answered by: DeltaFaucet2
Date published: 2014-06-30

Is the spout metalic or non-metalic?

Customer is wanting to be sure it is metal before purchasing.
Asked by: martha
Hello Martha, Thank you for your question. Delta tub spout RP73372 is made of non-metallic materials. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-09-23

What's the over all length of the spout. I"m looking for one that will come out further than normal as the tub has wider lip.

Asked by: John77
Hello John77, Thank you for your question. The Delta Compel Pull-Up Diverter Tub Spout RP73372SS model has a length of 7" (178 mm). Please see the below technical specifications for it. https://media.deltafaucet.com/SpecSheet/DSP-B-T14061%20Rev%20J.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2020-01-15

Does the aerator (plastic end piece) come off? What is the part #? What is the thread size?

Thanks
Asked by: Gavin
Dear Gavin, Thank you for your question. The plastic end of the Delta Tub spout RP73372SS, is not a removable part, it is the design of the spout. Best regards, Tanya
Answered by: Tanya
Date published: 2017-02-06

Diverted assembly photo or diagram

Can the diverted assembly be replaced in the future ?
Asked by: Edward
Hi Edward, Thank you for your question! The diverter assembly is not a part that can be ordered separately. The entire RP73372SS tub spout will have to be ordered. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-06-22

Can you please send the install instructions for RP73372SS?

Asked by: Left327
Hi Left327! Thank you for your question! I have reached out to you via email with installation instructions at this time. Best Regards, Tim
Answered by: Delta
Date published: 2020-08-01

The adapter that comes with the Compel spout, does it require MAP gas or is propane sufficient? Can the fitting take direct torch flame or does it need to be heated indirectly ? brass or copper fitting ? Water soluable flux & regular solder or special 

Asked by: John
Hello John, Thank you for your question! I would be more than happy to assist today. We do recommend soldering the fitting. We do recommend contacting a professional for any questions regarding the soldering itself. Please contact us back for any further questions. Best Regards, Kayla
Answered by: Delta7
Date published: 2021-01-19
  • y_2021, m_1, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_RP73372, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 7ms
  • questions, product