Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
With subtly upturned spout and handles, the Stryke™ Bath Collection radiates confidence and composure with an assured stature and ascending contours. Designed to be integral to both your bathroom’s everyday use and personalized style, Stryke's robust design breathes intrigue into any space in your home. Pair this tub spout with any of the Stryke tub/shower faucets for a complete look in the bath. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
- For use with Delta Stryke™ tub/shower faucets
- Diverts the flow of water from the tub spout to the shower head
- Sweat onto 1/2 in. C.W.T.
- Thread onto 1/2 in. IPS
- Durable metal construction
- Matte Black cultivates a sophisticated air and coordinates flawlessly with most other fixtures and accents
- Matte Black's bright tones are undeniably modern with a strong contrast
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
2-29/32
Valve Type:
NA
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 1 out of
5
by
Alex from
Diverter Fails
Diverter failed. The reviews weren't up when I bought it. Scrambling now to replace
Date published: 2026-05-02
Rated 1 out of
5
by
Anonymous from
Diverter problems just like everyone else
I would steer clear of this faucet the water flows wonky and the diverter is a pain in the buttj
Date published: 2026-03-19
Rated 3 out of
5
by
niwire from
Poor and flimsy diverter
Same issue as everyone else, it does not do a good job of diverting with a chunk leaking back from the spout. Sadly, after 5 years of difficult use and living with it, few months ago the top cap of the diverter broke. Now, we have to use a plier to lift up the diverter pin to be able to use the shower. For something as expensive very disappointed with the design and quality.
Date published: 2025-09-25
Rated 5 out of
5
by
Satisfied customer from
Sleek yet excellent quality
If spigots can be pretty, this one qualifies! It’s heavy metal - modern yet not trendy. We are very pleased.
Date published: 2025-02-22
Rated 1 out of
5
by
Disappointed from
Bad quality/function
Looks good. Terrible function. I've only had this for a couple months and facing the same challenges as everyone else. The diverter is difficult to pull up, and the water splits between the faucet and shower. I bought this for a kids bathroom so need something easy for their baths and showers. Interested in an alternative that will match.
Date published: 2025-01-26
Rated 1 out of
5
by
Carl from
Diverter is awful
Yet another unhappy Delta Stryke tub spout owner. We updated all of our bathrooms with Delta Stryke products. Everything has worked well except for this tub spout, which does not divert. This is a replacement for another (same model) that had the same issue... worked well for a week then just didn't. We're in communication to get ANOTHER replacement, this time opting for another model/brand that goes with the rest of the system.
Date published: 2023-11-21
Rated 4 out of
5
by
Lp25 from
Delta Stryke diverter
I found the same issues as everyone else as far as the diverter piece, being hard to lift and water spitting out from the spout. What we did find is that if we lifted the diverter all the way up and held it up before turning on the water, it
worked perfectly. I’m glad that we solve this issue before buying a new one.
Date published: 2023-11-03
Rated 1 out of
5
by
TBone 911 from
Terrible diverter function.
I just bought a house with two of these tub spouts. The previous homeowner did not maintain the home or water softener so I believed hard water scale was the culprit on why the diverters did not work well. I disassembled and cleaned with white vinegar and much to my dismay, it didn't solve the problem. Then I come to find out they use dissolving bushings in the screws that hold in the aerator. Total garbage now. And the diverters still don't work.
Date published: 2023-10-01
Q&A
Was wondering if there is an extension part to lengthen the spout, I am at least a 1/2 inch short and water drips over side of tub. I need a spout that has a diverter if only this had been a 9 in. Any recommendations?
Thank you for your review, AnnH! Unfortunately, we do not have a extension kit to make the tub spout longer extend further.
Date published: 2024-03-28
What is the little 'door' on the top of the faucet for?
Hi, 972w!
Thank you for your question. The part on top of the Delta RP93376 tub spout assembly is the diverter. Once the diverter is pulled up, the water will divert from the tub spout to the shower head.
Best Regards,
Rosanna
Date published: 2024-03-28
What is the length of this spout?
Hi, Dc19!
Thank you for your question. The Delta RP93376 Tub Spout Assembly measures 8 5/16" in length.
Best Regards,
Rosanna
Date published: 2024-03-28
I have followed instructions and the Diverter is so/so. Water still comes out of spout. there is the 18" clearance and all spacing is correct. There is on 90 degree for each spout but still the operation is not sound. Is the Diverter adjustable. 0 instruc
Hello Xosupra!
Thank you for your question and we are happy to help! There is no adjustment for the Delta Diverter Tub Spout MODEL#: RP93376BL.
You may be experiencing shower rise. There can be one of several reasons for shower rise:
The valve could be upside down.
The length from the valve to the tub spout is outside of the 8" to 18" rule.
There is more than one 90-degree angle elbow.
Something other than ½" smooth copper or galvanized pipe was used going to the spout. No push fittings. No "shark-bite" fittings. No cast or drop ear elbows.
Something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage.
With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer.
Best Regards,
Carrie
Date published: 2024-03-28
When filling the tub the water comes out in a thin horseshoe shaped pattern. It takes a really long time to fill the tub. Water preasure is good. How can i increase flow rate?
Hello Fw190,
Thank you for your question! I am sorry to hear that you are experiencing reduced flow from your Delta Faucet Stryke® Diverter Tub Spout In Champagne Bronze MODEL#: RP93376CZ! We would be happy to help.
The most common cause of a low flow rate is debris. The best way to clear any debris is to flush the supply lines. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute.
Please make sure that you are getting good flow through both the hot and cold sides while flushing. You can also shake the cartridge back and forth to make sure the back half of the cartridge rattles. This means that the pressure-balancing spool is moving freely, as it should. If it does not work try soaking the cartridge in white vinegar for about 15-30 minutes.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
The diverter works very hard. It is extremely hard to lift. Is there a way to improve this situation without busting the faucet or installation? Reference case #11022730
Hello Martha,
Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you.
We recommend wrapping a bag or towel mixed with a 50/50 solution of white vinegar and water around the Delta STRYKE Diverter Tub Spout. Allowing water to evaporate on the surface can lead to the build-up of mineral deposits. This can cause your diverter to be stiff.
Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
I have a pipe nipple comes out about 4' from the wall. Can I install the Delta RP93376SS threads directly onto a 1/2" pipe?
Hello,
Thank you for your question!
Yes, but it will require the use of the included RP12307 tub spout adapter.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-08-14
what is the bath spout and diverter made of?
Hello Amy M.!
Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help!
This Delta Faucet RP93376RB Stryke diverter tub spout is made of metal.
Please contact us directly if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.