Universal Showering
Diverter Tub Spout in Polished Brass
Model#:
U1075-PB-PK
Image Thumbnail, click to view zoomed product image
null
PRODUCT FEATURES
This Pull-Up Diverter Tub Spout in Polished Brass is a quick and easy way to update your shower. You can count on Delta reliability throughout the home, including our accessories and repair parts. We back each and every item with our lifetime limited warranty.
- 5 1/4" diverter tub spout
- Slip fit 1/2" CWT
- Threaded 1/2" or 3/4" IPS
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-3/16
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
happyplumber from
Beware! This is chromed PLASTIC...very cheap.
We replaced our metal spout with this cheap plastic one. This faucet broke off after 11 months of normal use. It is advertised as being brass material. They have cheapened the material to the point that it will not hold up to any normal expectations.
Date published: 2016-03-15
Rated 5 out of
5
by
Kugrpa from
Wonderfull product
The faucet was easy to install and works exactly as described.
Date published: 2016-01-08
Rated 4 out of
5
by
jujui from
like it
We used it couple weeks. the shape and color looks nice, I like it ,
Date published: 2014-06-11
Rated 5 out of
5
by
Mikit8183 from
Just what I was looking for!
My existing tub spout was not operating properly. This replacement spout brought us back to when all was newly installed.
Date published: 2014-03-11
Q&A
Is there a tub spout diverter that will fit into a 2 1/2 inch length pipe and is threaded at the end.
My present 30 yr old delta polished brass spout is pitted and will only partially divert. The present tub spout I have is threaded at the rear also if that makes a difference.
Hi Joe,
Thank you for your question. Unfortunately, we do not have a spout that is designed to fit on a 2 1/2" pipe. This spout can thread to a 1/2" threaded pipe that is 1/2" to 11/16" or 2 15/16". Tub spouts that use the RP12307 adapter work with a 5/8" – 1 5/8” pipe.
Best regards,
Jon
Date published: 2021-06-18
Can I order this without the shower diverter?
Hi, Geri!
Thank you for your question. The Delta U1075-PB-PK Tub Spout Assembly is not available as a non-diverter tub spout assembly. We do apologize for any inconvenience this may cause.
Best Regards, Rosanna
Date published: 2024-03-28
What size allen wrench does the set screw require?
Thank you for your inquiry, Terry Z! You would need either an 1/8" or 3/32" Allen wrench for the screw in the Delta Diverter Tub Spout U1075-PK.
Best regards,
Tanya
Date published: 2024-03-28
Is this spout all metal, or is it chromed plastic?
Hi, HappyWithDelta!
Thank you for your question. The U1075-PK is metal.
Best Regards,
Rosanna
Date published: 2024-03-28
I am trying to replace a chrome tub diverter that screws on to a 1/2" threaded pipe that extends 3 1/2" from the wall. Do you make anything with that description?
Hi, Vince!
Thank you for your question. The Delta U1075-PK Tub Spout assembly can fit on a threaded pipe that extends 3 7/8"-4" (9.84cm-10.16cm").
Best Regards,
Rosanna
Date published: 2024-03-28
I'm looking for a diverter tub spout with 4-inch spout reach and screw-on. Do you have anything fitting that?
I like chrome.
Hi Brownie,
Thank you for your question! The RP61357 will fit on a 4" pipe with 1/2" threads.
http://www.deltafaucet.com/repairparts/details/rp61357.html
Best regards,
Jon
Date published: 2024-03-28
I need a spout that will screw on to a 3/4" diameter stub that extends 3/4" from the wall. Will spout u1075-pk screw on flush to the wall?
Most spouts seem made only to handle a stub that extends 1/2" from the wall, so I'm having trouble finding one that will screw on without leaving a 1/4" gap. Thanks for any help.
I might also be interested in spout u1011-pk, so I would have the same question about that one.
Hi Searcher, Thank you for your question. The distance that the pipe nipple extends from the finished wall for the U1075-PK and the U1011-PK tub spouts is a minimum of 1/2" and a maximum of 3/4". They should work with your distance.
Thanks,
Dave
Date published: 2024-03-28
Does this spout require caulking around its base?
Hi OlafTheBold,
Thank you for your question. You may use caulk around the base of the tub spout to ensure a water tight seal, especially if you have an uneven wall surface, but it is not required.
Best regards,
Jon
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.