Delta®

Traditional Wall Mount Pot Filler in Champagne Bronze

Model#: 1177LF-CZ
Add to Favorites
Find local Delta® installers.
Delta®
Traditional Wall Mount Pot Filler in Champagne Bronze
Model#: 1177LF-CZ
List Price: $1,12800
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Filling pots on the stove has never been easier or more affordable, thanks to the new Delta Pot Filler faucet. Very competitively priced, the ADA compliant Pot Filler features a wall-mount, dual swing joint design with dual shut off valves and a 4 gpm flow rate to fill large pots in no time. A pot filler makes it easy to fill large cooking vessels quickly and without the walk from sink to stove.
  • Single hole installation
  • Escutcheon
  • ADA Compliant
  • Dual handle design for easy operation
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Installation Information
Single hole wall mount installation
Flow Rate :
4.0 gpm @ 60 psi, 15.1 L/min @ 414 kPa
Overall Height (in.) :
8-17/32
Valve Type:
Ceramic valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Love the way it swings so freely and perfect for our needs
Date published: 2026-03-30
Rated 5 out of 5 by from Pot filler I. I am enjoying the pot filler. Easy to use. Water pressure is steady.
Date published: 2025-12-01
Rated 5 out of 5 by from Repair leaking swivel. Pot filler repair. Leaking at the swivel. Three, #80 rubber O-rings. Use allen key to remove two screws on the wall plate. Turn potfiller counter clock wise to remove from wall. On the bottom of the swivel, there is a decorative plate that can be removed. Once removed, there is an allen bolt. I think it’s 1/4” allen wrench. It’s very tight. I had to use a vice to turn the bolt. Once loosened, you can pop out the stem and there are 3 rubber o-rings. Replace those with #80 size o-ring. Make sure to use pipe tape on the wall plate when installing back.
Date published: 2025-10-05
Rated 5 out of 5 by from Replacement o-ring size for swing arm in review. Love my pot filler 1177LF ! Delta however does not offer replacement o-rings when it started leaking but I found what I needed and repaired it. I disassembled my leaky pot filler and measured the o-rings in the arm joints where it was leaking with a micrometer. There are three o-rings per swivel joint. Based on my measurements I ordered Rubber O-Rings size 20mm OD - 14mm ID and 3mm Width from AMZ. You need six but order extra if you damage one during install. The replacement was easy. Turn off the water at the valve closest to the wall. Open the valve at the end to drain any water. Pop off the decretive caps and using a proper size allen (hex) wrench unscrew the connection at the wall valve first. Remove the pot filler. Unscrew the second joint. Remove the old o-ring that is closest to the threads on the brass insert first. Then remove / unscrew the insert completely. You may need to gently push it out with a wooden dowel and rubber mallet. Remove the last two o-rings from each insert. Clean any mineral buildup from ALL parts. I used white vinegar. Dry then lube ALL parts with a small amount food grade silicone grease before and after installing the o-rings to assist with assembly and o-ring wear. Replace just the first two o-rings farthest away from the threads first. Install the inserts back into the pot filler arms. It will be a tight fit. This is where the silicone lube and rubber mallet if needed come in handy. Use a wooden block or socket so you do not damage the brass threads when pushing the inserts through and out the other side. I also slowly twisted the insert with the hex wrench while pushing back in to prevent o-ring damage. Once they are all the way through add the last o-ring. If you try to put all three o-rings on first you will damage the o-ring closest to the threads while pushing the insert back in. Re attach the filler swivel arms pieces first and then the filler back to the wall valve. Tighten securely but do not over tighten. Check for leaks by shutting off the outer valve and turning on the wall valve. Retighten with hex wrench as needed. No leaks? Replace the beauty caps and run the water in a large pot to flush out any excess grease. After replacing the o-rings my pot filler was a bit stiff to move but no longer leaks! :)
Date published: 2025-07-08
Rated 5 out of 5 by from My Customer Was Thrilled My customer was thrilled with the look, feel and performance of this pot filler.
Date published: 2024-07-30
Rated 1 out of 5 by from Leaks We have only had this pot filler for a few years and it leaks from multiple spots.
Date published: 2024-04-14
Rated 5 out of 5 by from Gorgeous and functional Very heavy and works well. Love the dual turn on off to protect from leaks
Date published: 2024-03-17
Rated 1 out of 5 by from Leaking After 2 years, this product started leaking at the middle joint. Was charged $350 by plumber for repairing.
Date published: 2024-02-08
  • y_2026, m_8, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_114
  • loc_en_US, sid_1177LF-CZ, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Q&A

Just like many others have asked. What is the part number for the O-ring that goes into the arm joint. Mine is leaking and needs to be replaced.

Asked by: Luke
Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! The swivel points on our pot fillers do not have a replaceable part. We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-01-21

My 1177LF-SS has worked seamlessly for the last 10 yeras. now it seems to leak from the joints but i cannot see any listed parts to replace within.. can you please advice? thanks a lot from a lifetime customer

Asked by: Adrian
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-09-26

Is this Stainless the same color as Spot Shield stainless?

Asked by: Tampamommin
Hi Tampamommin, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Faucet Delta® Traditional Wall Mount Pot Filler In Stainless MODEL#: 1177LF-SS finish is described as a neutral, low-gloss finish and the Spotshield Stainless is described as a spot-resistant neutral, low-gloss finish. The finishes would match in color, but the Spotshield has an extra coating to resist spots. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

 I have the Cassidy Pot Filler (DEL1177LFCZ) that was installed a few years ago and it is leaking exactly where others have mentioned (right at the swivel arm). I too have tried to replace the washer, and it still leaks. Where can I find a fix?  

Asked by: Jessbecause
Hello Jessbecause, Thanks so much for contacting Delta Faucet Company! We apologize for the leak you're experiencing and are happy to help. Please respond to the email we have sent for further assistance. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-04-24

I have a 1177LF-RB pot filler. I am needing the parts for the swivel on arm of the filler. it is a brass bolt with 3 o-rings, 2 plastic bushings that connect the two arms.

Asked by: P Jones
Hi P Jones, Thank you for reaching out to Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

1177LF-SS pencil size stream leak w/ wall valve closed, end valve open. I need new seal/oring for that cartridge.

Asked by: Tjlm
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-01-22

I am removing and replacing the cartridge. Does it simply unscrew counterclockwise. It seems tight and don’t want to break it. 

Asked by: Brian
Hello! Thank you for contacting Delta Faucet Company! Please make sure to turn the water off before removing the handle. There is a button on the top of the handle that is covering a phillips head screw. After removing the button and the screw, the handle will come off. The cartridge is threaded into the valve and can be removed using an adjustable wrench counterclockwise. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-10-01

Can you tell me what the expected flow rate is for this faucet? Assume 60psi supply line. I can't seem to find that in the specs.

Asked by: jbsf
Hi JBSF, Thank you for your question about the Delta Faucet model 1177LF-SS Traditional Wall Mount Pot Filler In Stainless. We will be happy to assist you as quickly as possible. This faucet should have a flow rate of 4.0 GPM at 60 psi. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My delta Wall Mount Pot filler model 1177LF-SS Keeps dripping water eventhough the water is turned off

Asked by: Delta Faucet

What is the part number for the cartridges that are in the pot filler model 1177LF-SS. The parts breakdown indicates that we have to purchase the handle with the cartridge. We only need the cartridges.

Asked by: Julie
Hello Julie, Thank you for reaching out to Delta Faucet Company! The cartridges are included with the handles and cannot be ordered separately. We apologize for any inconvenience this may cause. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

Hi, My pot filler Model#: 1177LF-SS has developed a leak at the swing joint closes to the wall are there replacement parts available?

Asked by: Mike
Hi Mike, Thank you for your question! Unfortunately, we don't carry replacement parts for the pot filler swing joints. The pot filler may need to be replaced. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-07

My pot filler is leaking when I turn it on at the bend connection Is it fixable and how do I do it. I have the Traditional Wall Mount Pot Filler model 

Asked by: Moman
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Does this faucet come with any type of water filtering system or can it be connected to a water filter?

Asked by: JackieW
Dear JackieW, Thank you for your response, Model 1177LF does not come with any type of water filtering system. We do not recommend installing a filtration system on the pot-filler as it is not needed for this installation, it is made for filling up large pots. Your feedback is important to us, as it helps us refine our products and services. Feel free to contact us directly, if you have further questions. Best Regards, Kyra
Answered by: Delta7
Date published: 2024-03-28

My 1177LF pot filler doesn’t close at the wall, what can I do to shut off water at the wall. 

Asked by: Johnny

What is the part number for the replacement valve cartridge for the 1177LF pot filler

Asked by: Jeffe1

my pot filler is leaking half way down the arm does it need a washer if yes how can i install it

Asked by: louis
Hi louis, Thanks so much for contacting Delta Faucet Company! If the Traditional Wall Mount Pot Filler MODEL#: 1177LF leaks out of spout or handle replace the Metal Lever Handle W/ Cartridge MODEL#: RP74972. To do this, remove the handle, ring, screw and base. Then unscrew and replace the valve cartridge. Reassemble in reverse order. Be sure to line up the handle with the valve in the closed position before pushing handle into place. Please refer to page 6 of the Maintenance and Installation guide for more details. I have attached the link below. https://media.deltafaucet.com/MandI/86363%20Rev%20C.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is this pot filler compatible with reverse osmosis-filtered water?

Asked by: Ben
Hi Ben, Thank you for your question. The pot filler faucet is not designed for reverse osmosis systems. RO water’s pH and total dissolved solids concentration may cause corrosion to the internal components. Best Regards, Delta Faucet
Answered by: DeltaFaucet
Date published: 2023-05-25

Hello, What would be the companion single hole sink faucet to this pot filler?

Asked by: KVN1
Hello KVN1! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! There is not a particular faucet exclusive to any Delta Faucet collection that is styled the same as this Delta Faucet 1177LF potfiller. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

The cap/cover for the screw on the handle is missing.  Is this available as a replacement part. 

Asked by: Kim P
Hello Kim P! Thank you for your question! I am happy to help The Delta 1177LF-RB handle cap is not available on its own. However, it is included with the handle assembly RP74972 . Please reach out to us directly if you need further assistance. Best Regards,
Answered by: Delta7
Date published: 2021-02-01

Our pot filler is leaking at the swivel joint. Is there a replacement kit or repair instructions available?

Asked by: Clay
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-11-28

My 1177LF is leaking at the middle swivel joint. I assume there is an o-ring there but I don't see it in the parts list or an exploded view or disassembly procedure. How do I fix this?

Asked by: mkerlin

Our pot filler, Traditional stainless finish is leaking at the joint nearest the wall. What do I need to replace to stop the leak?

Asked by: Emil

My traditional wall mount pot filler is also leaking at middle joint. Please help.

Asked by: Keith
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-06-19

Hello, can you please send me instruction or a video on how to replace valve cartridge on pot filler 1177LF. I have received my replacement part already but need assistance in how to replace

Asked by: R Taft
Hello Valued Customer, Thank you for contacting Delta Faucet Company! Please gather a screw driver, towels, a large bowl, and possibly a wrench. 1. Turn the water off to the unit. 2. Place a bucket under the spout and turn the handles on to release the residual water. 3. Remove the handle button on the top of the handle. 4. Use a philips screw driver to remove the screw. 5. Once you remove the handle and the adapter under it, the cartridge will also thread out. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-06-30

We have a Traditional Wall Mount Pot Filler delta 1177LF  and it is dripping from the wall handle sometimes and from the other end at the tip. Could you please help me to send me some guides trying to Identify the possible problem ? Thank you in advance 

Asked by: Willy
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-14

I have this pot filler and it looks like it's been installed for about 4 years by the previous owner. The joints are leaking like crazy and I was wondering if this can be taken apart to fix or do I need to replace the whole unit.

Asked by: mushu315
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 1177LF. Please reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-07-09

Same problem as the very first question listed: drip at the swivel arm. Is there a parts package to buy that includes washers etc.?

Asked by: darrell
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-20

My pot filler, Model#: 1177LF-RB, has developed a drip at the swivel arm joint. How can this be repaired?

Asked by: KARC
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-03-24

Are the screw covers for 1177LF-CZ available for purchase?

Asked by: Chris h
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 1177LF-RB. The screw covers are not available to purchase separate. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-07-08

Can water filters be attached to the pot filler’s? If so what kind is recommended?

Asked by: Jules
Hello Jules, Thank you for your question about the Delta Faucet model 1177LF Traditional Wall Mount Pot Filler. I apologize for any difficulty finding this information. We are happy to help! This faucet is designed to attach directly to a cold water supply pipe. We do not have a recommended water filter. I recommend consulting the filter manufacturer for installation questions. Installing a water filter is likely to reduce the flow rate from this pot filler faucet. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2026, m_8, d_14, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_6, bvpage2n
  • co_hasquestionsanswers, tq_180
  • loc_en_US, sid_1177LF-CZ, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 68ms
  • questions, product
PART LIST

PART LIST

Image-RP61824 Secondary Image-RP61824

Addison®

Addison® Cartridge Fluehs - Cold

List Price: $87.35
Online Price: $69.88
Free Ground Shipping All Orders $49+

RP61824

5.00 3
Image-Master-RP74972

Delta®

Delta® Metal Lever Handle w/ Cartridge - Pot Filler

List Price: $98.40 - $133.20
Free Ground Shipping All Orders $49+

RP74972

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.