Tub Spout - Non-Diverter in Champagne Bronze
Model#:
RP100747CZ
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Resources
Installation Information
Overall Height (in.) :
3-5/8
Valve Type:
NA
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
DZ from
Good product for the price
[This review was collected as part of a promotion.] Arrived as described. Works as intended. Good quality.
Date published: 2025-06-16
Q&A
Is this spout NON diverter? Looks like it has a diverter lift knob?
Hi Sanders,
Thank you for contacting Delta Faucet Company!
Our RP100747CZ tub spout does not have a diverter, however, it does have the finial on the end for design purposes only.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-06-14
What’s the overall length from the wall for this
If the diverter stops working (fails to stay upright), does the whole faucet need to be replaced or can I just replace the actual diverter? If the diverter can replaced, what is the part number?
How long is this bath tub spout? What are the dimensions? Is this one made of plastic?
Hello labchaser!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Dryden™ Tub Spout - Non-Diverter In Chrome MODEL#: RP100747 is 6 1/4" (159 mm) long. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
My Dryden Tub Spout will not stop dripping water. I had a plumber look at the issue and seemed to solve. Is there recommendations for me to consider? Do I buy a new one or is there a way to fix the leak?
Hi Steve,
Thanks so much for contacting Delta Faucet Company!
It is possible that flushing the product could resolve this issue. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute.
Please make sure that you are getting good flow through both the hot and cold sides while flushing. You can also shake the cartridge back and forth to make sure the back half of the cartridge rattles. This means that the pressure-balancing spool is moving freely, as it should.
If you would like installation help, you may contact our residential warranty line directly at 800-345-3358 (prompt 2, then 4). We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. We also have how-to videos on our website and on our YouTube channel.
https://www.deltafaucet.com/service-parts/how-to-videos
If that doesn't resolve the issue a new spout would need to be ordered.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-04-12
How far out from the wall do my pipe threads need to be for the adapter for this spout?
Hi Travis, thank you for your interest in the RP101849SS!
Here is the Installation sheet for our tubs spouts in the link below.
https://media.deltafaucet.com/MandI/107700%20Rev%20E.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
Is this made of plastic?
No, this tub spout of metal.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-02-08
Does this spout have a 3/4 in opening in the back? The delta tub spout I removed looks like it has a fitting soldered onto the 1/2 copper pipe so I need a spout with approx. a 3/4 in opening.
Hello JoeP!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. Unfortunately, we do not have the technical specifications for the opening in the back of the Delta Faucet Dryden™ Tub Spout - Non-Diverter In Venetian Bronze MODEL#: RP100747RB. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.