Victorian®
Tub Spout - Pull-Up Diverter in Chrome
Model#:
RP34357
Image Thumbnail, click to view zoomed product image
null
PRODUCT FEATURES
Included with all applicable faucets, we know that sometimes little parts like this Delta Victorian Pull-Up Diverter Tub Spout in Chrome RP34357 get lost or misplaced. That's why Delta has made it available for the handy DIYer to order. Just another way Delta is more than a faucet.
- Pull up to divert
- 7 1/2" total length
- Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-1/8
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
SmokeyJoe from
All plastic and too scary to install
Very disappointed. I bought this to replace an old tub spout that had internal rusting. I have always had good luck with Delta products. I ignored the one star reviews that had issues with the internal plastic piece cracking, leaking and causing water damage. I recieved this today and immediately sent it back. The shell is also plastic and could easily be broken if someone bumped it hard with their leg. It is very nice looking and has a very nice machined brass adapter, other than the diverter knob and rod the rest is plastic. Too scary to install so I sent it back.
Date published: 2026-03-20
Rated 2 out of
5
by
jpeterb from
99 cent o-ring fails on a $100 faucet
Finish held up but the o-rings in the faucet failed causing water to spray behind the wall, down into the basement. There doesn't appear to be a way to replace the 99 cent o-ring. Now I have to buy a $100 replacement. This was installed several years ago by my plumber so of course I do not have the receipts.
Date published: 2026-01-05
Rated 5 out of
5
by
Ashleigh from
Great customer service and product
My tub spout was purchased 5 years ago. It was stripped when removing it for a remodel. Delta customer service replaced it free of charge. I am a Delta customer for life!! Great customer service. It is a quality piece. Very heavy and works well. We have had no issues with the entire tub/shower set.
Date published: 2025-04-24
Rated 2 out of
5
by
Roberto Guzman from
Faucets
I orders one payed priority mail have not got it yet
Date published: 2022-12-24
Rated 5 out of
5
by
Ernie75 from
Replacement as good as the Original
I bought it as a replacement and the installation was very easy, now it's working as good as new.
Date published: 2022-09-08
Rated 5 out of
5
by
10yrsold from
Easy to install
Just unscrew the old Delta faucet and screw on the new one.
Date published: 2022-06-05
Rated 5 out of
5
by
Butchy from
Great spout
I bought this a week ago and love it
Date published: 2022-02-28
Rated 3 out of
5
by
tkb1471 from
Just needed the guts.
Bought this for the plastic innards. Brushed nickel is discontinued so I was able to get the guts of this out and into the existing one. I think it ought to be sold as such, being plastic and prone to failure so easily.
Date published: 2021-11-30
Q&A
I need the ring for the spout adapter MODEL#: RP34357
Hi, Jesse!
Thank you for your question. The O-ring for the Delta RP12307 Adapter Assembly is RP1745. Here is a link to this part:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP1745
Best Regards, Rosanna
Date published: 2024-03-28
Is there a similar spout that is metal and not plastic. I need the rubbed oil bronze color.
Hi, Peggy.
Thank you for your question. Unfortunately, we do not have similar Traditional-Style tub spout assemblies in the Oil Rubbed Bronze finish that are metallic. We do have the RP81273OB, RP61357OB, and RP64721OB tub spouts that are Oil Rubbed Bronze.
Best Regards,
Rosanna
Date published: 2024-03-28
I broke the plastic part that holds the chromed end onto my RP34357 (too aggressive w/ cleaning). Now the diverter doesn't close completely and sprays when diverted for shower use. Can I replace just the plastic connection parts? Have photo if needed.
Thank you for your question, BenW! The diverter is not a separate repair part unfortunately and new tub spout will be needed.
Best regards, Edward
Date published: 2024-03-28
My shower/bath diverter has become ineffective. RP34357
can I just install a spout with the pull up diverter by screwing off the old broken spout and screwing the new one onto the existing threaded copper pipe. Or is some actual plumbing skill needed.
When the diverter is pulled up, only about 25% of the flow is diverted to the shower.
Hi Bruce, Thank you for your question. The RP34357 tub spout threads directly onto a 1/2" threaded pipe or fitting at the back of the spout. You should be able to unscrew the spout and replace.
Thanks,
Dave
Date published: 2024-03-28
Can I get installation instructions for this tub spout, please
I have this spout, and during a remodel the outer (chrome) part of the spout was taken off, leaving the plastic inner spout connected, coming through the tub wall. Now, I cannot figure how to reconnect the outer spout. I lost the installation instructions during the remodel, can you provide them?
Thank you for your question. Delta Faucet model # RP34357 can either be sweat onto a copper pipe or threaded onto an iron pipe. Included here is a link to the instructions for installing your tub spout. The instructions are on page 12 of the booklet.
http://www.deltafaucet.com/customersupport/documentation/t17455.html?document=mi&documentIndex=0#flashWrapper
Date published: 2024-03-28
Does this spout have a flow restrictor in it? Customer is complaining about flow rate at tub spout is slow
Dear Billy,
Thank you for your question. At 60 PSI, the RP34357 Victorian tub faucet will run at 5.6 gallons per minute. This spout does not have a flow restrictor in it. We would advised flushing the unit, if your getting a low or slow flow.
Best regards,
Tanya
Date published: 2024-03-28
How do I remove pull up diverter?
Hi, JW!
Thank you for your question. The RP34357 unscrews off of the copper tube counterclockwise.
Best Regards,
Rosanna
Date published: 2024-03-28
will go onto a 1" connector..the previous one was 1" and was connected behind the wall so in order to change it to the universal size I would need to take the wall out which I don't want to do so I need a tub spout that connects to 1" connector..thanks
Hi, Casey!
Thank you for your question. Unfortunately, we do not make 1" tub spout connections. All of our tub spouts are 1/2". I do apologize for any inconvenience this may cause.
Best Regards,
Rosanna
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.