Spray Assembly - Pull-Down Kitchen in Stainless

Hello Bob rva, Thank you for your question. The Delta RP46751SS sprayer assembly simply twists/screws onto the hose assembly, once the old one has been removed/unscrewed. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi, Beandean! Thank you for your question. The Delta RP46751SS sprayer assembly simply twists at the wand base to change from stream to spray. Best Regards, Rosanna

Hi Mark, Thank you for your question. The aerator for the RP45751SS is not available as a separate item. The entire spray assembly would have to be ordered. If you feel mineral build up is the problem you can soak the assembly in a 50/50 solution of vinegar and water to clean the aerator. Thanks, Dave

Hi Matt, Thank you for your question. We do not recommend disassembling the RP46751SS wand. To clean the wand assembly we recommend soaking the wand in a 50/50 solution of vinegar and water to help break up any mineral deposits. Make sure you rinse the wand when done. Thanks, Dave

Hello pinballwzrdz, Thank you for your question. We do not recommend disassembling the Delta Sprayer/Wand RP46751SS assembly. To clean the wand assembly we recommend soaking the wand in a 50/50 solution of vinegar and water to help break up any mineral deposits. Make sure you rinse the wand when done. Please feel free to call, email, or message us on social if there is anything you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Hi, Chris! Thank you for your question. The Delta RP60734 sprayer assembly will be the part that will fit the Delta 978-DST faucet. The sprayer assembly does include the aerator. Best Regards, Rosanna

Hello pmiller189, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Spray Assembly - Pull-Down Kitchen In Chrome MODEL#: RP46751 does not have a separate aerator, If you are having and flow issues we would recommend soaking the wand in a 50/50 mixture of white vinegar and water. Also, flushing the unit can help dislodge any debris or blockage. Please see the flushing steps below. Please shut water supplies off before starting this process. You will need a 1/8” Allen wrench, needle nose pliers, a quarter, towel, and bucket. 1. We are going to flush the diverter first; to do this we will need to remove the spout. Please unthread the spout bonnet counterclockwise and pull the spout straight up to remove it. Inside you will see a black plastic piece. This is your diverter. 2. Please place your quarter in the slots on the diverter and take your needle nose pliers to twist it out counterclockwise. 3. Please remove your handle with the 1/8" Allen wrench. 4. Please pull the handle off of the cap. You may remove the cap and the spout at the time. 5. Please pull the handle off of the cap. You may remove the cap and the spout at the time. 6. You will now see the Cam & Packing and stem to the ball assemble. Please remove these. 7. If you look into the valve, you should see a seat and spring. Please pull these pieces out before we flush. 8. Place the bucket behind the spout and around one of the handles. Please turn both water supplies on. Please flush this out for about 30 seconds to a minute. 9. After this, shut the cold water off and move the bucket and towel to the hot side, and now flush this side out as well. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello jimib, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Spray Assembly - Pull-Down Kitchen MODEL#: RP46751SS can be updated by purchasing a couple of parts, RP54537, RP51480, and RP60923. These will replace the spout tube, wand, and friction spacer with the DST versions of these parts. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole