Delta®
Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom in Oil Rubbed Bronze
Model#:
RP62472OB
Image Thumbnail, click to view zoomed product image
Documents & Specs
Installation Information
Overall Height (in.) :
5
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
EricNC from
Finish peeling off
Like everyone else here has already mentioned the finish is coming off. I thought I was buying quality product when I purchased. Very disappointing.
Date published: 2026-05-09
Rated 1 out of
5
by
DJC 1 from
Poor design
Horizontal rod is too short to work drain plug
Date published: 2025-03-31
Rated 2 out of
5
by
Mike from
Poor finish
Poor finish on drain plug. Finish came off after 2 years of use.
Date published: 2025-01-13
Rated 2 out of
5
by
JohnG from
Matte Black finish peeled off
The drain assembly has not held up. Like another customer, our matte black coating peeled off revealing the brass base less than 3 years after install. We will try another brand for replacement.
Date published: 2025-01-06
Rated 2 out of
5
by
Kasrobn from
Not the best
The bronze ring portion wore off within three years and became copper.
Date published: 2025-01-05
Rated 1 out of
5
by
Cv53 from
Cheap plastic brakes easy
Broke while installing very cheaply made.
Date published: 2024-11-11
Rated 2 out of
5
by
docbobbyk from
tailpiece outside diameter smaller than standard
the tailpiece is less than 1 1/4 inch. Closer to 1 1/8 inch. Which means that the standard gasket through which the tailpiece protrudes, which is made to fit over an 1 1/4 OD tailpiece, has a gap which admits draining water. I noticed this when foaming soap was used for hand washing. Bubbles flowed right up around the tailpiece.
Solution: Delta could provide a gasket with an 1 1/8 inch through-hole to slip over the tailpiece.
Note: the 1 1/8 inch gasket I referenced above is NOT a standard size. At least one plumbing supply house I contacted does not carry a gasket of that size (it makes up into an 1 1/2 p-trap with a coupling nut)
further note: the p-trap is PVC. Standard 1 1/2, nothing fancy. Was working fine with the old chrome 1 1/4 inch tailpiece coming off a Delta drain assembly.
Reality solution: old standby plumber's putty.
Date published: 2023-09-11
Q&A
Hello, I only need the top flange (oil rubbed colored) piece of the drain assembly. Is there a way to get only that piece and not the whole assembly?
Hi, Jeff.
Thank you for your question. The top flange part on the Delta RP62472OB Pop Up Drain assembly is not available on it's own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced.
Best Regards,
Rosanna
Date published: 2024-03-28
RP62472 bronze pop up assembly for Windemere faucet: I need to get a replacement pivot nut and hoping to get from local hardware store. What is size on that nut?
Hi, Barbara!
Thank you for your question. The pivot nut for the RP62472OB pop up drain assembly measures at 7/8"-18.
Best Regards,
Rosanna
Date published: 2024-03-28
Is it possible to just get the plastic replacement pop up plug - 4" long / oil rubbed bronze cap?
Hi Mike, Thank you for your question. The lavatory drain stopper in the RP62472OB drain assembly is not available as a separate item. We do offer the RP5648RB stopper that will work with your drain although there is a slight difference between the OB and RB finishes.
Thanks,
Dave
Date published: 2024-03-28
My grandson thought it would be cute to take the 4 stoppers out of the sinks, and place them behind my truck tires! I just installed the faucets in the last month. Can I purchase only the oil rubbed bronze stoppers on the 25713LF-RB faucet. Thank you.
Hello Mad Grandpa,
Thank you for your question. The lavatory drain stopper in the RP62472OB drain assembly is not available as a separate item. We do offer the RP5648RB stopper that will work with your drain although there is a slight difference between the OB and RB finishes.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP5648RB
Best regards,
Tanya
Date published: 2024-03-28
Is there a gasket or seal under the stopper flange? I have a leak between the flange and the bottom of the sink. Instructions call for a silicone bead
Hi scoop,
Thank you for your question. We do recommend to use silicone under the flange. Unfortunately, we do not provide a gasket to go between the flange and sink. Please be sure to allow the silicone to fully cure (usually 24 hrs) before running water from the faucet.
However, the included gasket should seal against the under side of the sink. If the sink is rough or uneven, you may need to use a thin bead of silicone. Please not that this pop up will only work with sinks with a depth of 1 5/8 - 2 3/8".
Best regards,
Jon
Date published: 2024-03-28
Can you order the rod for the drain lift?
The end of it rusted off .Tried a short one and its a problem
Hi Rusty, Thank you for your question. The lift rod that will work with the RP62472 drain assembly is the RP6146. If you need the horizontal rod then RP12517 should work.
Thanks,
Dave
Date published: 2024-03-28
Is there a part number for just the nut that hold the horizontal (ball) rod in?
Looking for the nut that holds the ball/rod in for the plastic pop-up assembly.
Hi buchanab,
Thank you for your question. The nut is not available separately.
Best regards,
Jon
Date published: 2024-03-28
How to order longer horizontal rod,one in the box is not long enough,need one with 10 inch long,installed undermount sink ,wide spread
Hi Temo,
Thank you for your question. Unfortunately, we do not manufacture a longer horizontal rod for the RP62472 Plastic Pop-Up assembly. However, we do manufacture a Metal Pop-Up assembly and Push Pop-Up assembly. We also do have longer horizontal rod options for the metal pop-up assembly.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533
https://www.deltafaucet.com/parts-product-detail?modelNumber=72173
Best regards,
Tanya
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.