Tub Spout - Pull-Up Diverter in Matte Black
Model#:
RP90158BL
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
The confident slant of the Pivotal® Bath Collection makes it a striking addition to a bathroom’s contemporary geometry for a look that makes a statement. Complete the look of your bath with this Pivotal Tub Spout - Non-Diverter. Matte Black makes a statement in your space, cultivating a sophisticated air and coordinating flawlessly with most other fixtures and accents. With bright tones, Matte Black is undeniably modern with a strong contrast, but it can complement traditional or transitional spaces just as well when paired against warm neutrals for a rustic feel akin to cast iron.
- Perfectly coordinates with the Pivotal bath collection
- Extends 9 in. from wall
- 7-1/2 in. from wall to center of water outlet
- Pull up to divert water from tub spout to shower head
- Tub spout uses 1/2 in. -14 NPT with 3/8 in. stub out
- Metal construction
- Lifetime limited warranty
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
Single hole installation
Overall Height (in.) :
3-1/4
Valve Type:
NA
REVIEWS
Q&A
Is there an adapter for this spout that would connect to 1/2” copper pipe or 1/2” pex
Hi, Ribelin81!
Thank you for your question. At this time, we do not make an adapter to change from 1/2" copper pipe to 1/2" PEX connection for the Delta RP90158BL. We do apologize for any inconvenience this may cause.
Best Regards, Rosanna
Date published: 2024-03-28
Could you pair this with a shower trim and divert to a hand shower instead of a shower head? I haven’t been able to find a wall mounted tub filler and hand shower combination.
Hello Annabelled,
Thank you for your question. The Delta Pivotal Pull-Up Diverter Tub Spout RP90158BL can be installed with the Delta Shower Trim, MultiChoice Universal Rough-In Valve R10000-UNBX, Diverter Rough-In R11000 and matching 3-setting diverter trim kit for a complete tub and shower install. The pull-up diverter tub spout would divert the water to the diverter assembly for choosing the shower head or hand shower. Please feel free to call, email, or message us on social if there is anything else you.
Best regards,
Tanya
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-03-28
How far does the nipple for rough plump have to extend? Your previous answer to Layth can not be correct as the threads don’t even start till 3/8 past edge.
Not true. The treading on the spout does not start until 3/8 in. inset from the base. Also 3/8-1/2 in. would mean it only has 1/8 in to thread which would never give a seal.
Date published: 2024-03-28
Can this tub spout be used with the Delta RP33794 adapter?
Thank you for your question, Ronald! The RP90158 Pull Up diverter tub spout threads directly onto 1/2"-14 NPT nipple that extends 3/8"-1/2" from the finished wall. This will not work with an adapter.
Best regards, Edward
Date published: 2024-03-28
Is there a way I can purchase this spout with dryden components for the valve trim and shower head all in polished nickel?
Don’t buy this tub spout. It restricts flow rate and causes siphoning effect to make water run out of shower head when diverter is not being used.
Date published: 2024-03-28
is the 1/2" ips connection in the base of the spout ?
Hi, Greg!
Thank you for your question. The Delta RP90158 Tub Spout Assembly connects to a 1/2" IPS through back of spout.
Best Regards, Rosanna
Date published: 2024-03-28
If I currently have a Delta Ara Model RP75435SS Tub Spout and want to replace it with the PIVOTAL® Tub Spout - Pull-Up Diverter MODEL#: RP90158KS. Would I have to do anything special or would it be a simple swap?
Thank you for your question, Michelle!
At this time, we do not make an adapter to change from 1/2" copper pipe to 1/2" PEX connection for the Delta RP90158KS. We do apologize for any inconvenience this may cause.
Best Regards,
Christina
Date published: 2024-03-28
what kind of stub out does this require? How far out from the finished wall, thread size, copper or galvanized? Thanks, Tom
Hi, Layth!
Thank you for your question. The RP90158 Pull Up diverter tub spout - threads on to 1/2"-14 NPT nipple extending 3/8"-1/2" from finished wall.
Best Regards,
Rosanna
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.