Metal Lever Handle - Tub & Shower in Chrome

Hi, Maxine13! Thank you for your question. You can find the RP90845 handle kit at any local Lowe's store. If they do not have this readily available, they can help with a special order for you. If you would like to contact us for purchase, please call our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. Best Regards, Rosanna

Hi Amy J, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Metal Lever Handle MODEL#: RP90845 is can be found at the link below. https://media.deltafaucet.com/PartsDiagram/DPD-B-B112915_A.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP90845. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Erick, Thank you for your question about the Delta Faucet RP90845 Foundations® Metal Lever Handle - Tub & Shower In Chrome. Please accept our sincere apology for the inconvenience you are experiencing finding this information. We will be happy to assist you in resolving this issue as quickly as possible. Yes, this handle kit includes a set screw. https://media.deltafaucet.com/PartsDiagram/DPD-B-B112915_A.pdf Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello! Thank you for contacting Delta Faucet Company! The set screw for our RP90845 handle is RP79243, and it has a thread size of M5 x.5. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Jeb1968, Thank you for your question! I will be happy to assist you. There is an adjustment on your cartridge assembly. Once the handle has been removed, you will see a blue cap with an o-ring on top. a. Remove the handle(1) and handle adapter (2). b. Pull the O-Ring (3) to a position where it is possible to slide the Rotational Limit Stop (4) out enough to rotate. c. Rotate the Limit Stop. As you move the Limit Stop counterclockwise, you progressively add more and more hot water in the mix. Repeat as necessary. The indicator (5) on the limit stop represents the amount of hot water you are mixing with cold water. NOTE: Temperature change per tick mark could be 0°F- 15°F based on inlet water conditions. The last position counterclockwise will result in the greatest amount of hot water to the mix, and the greatest risk of scald injury if someone accidentally turns the valve handle all the way to the hot side while showering or filling a tub. d. After Rotational Limit Stop is in place, push O-Ring back into place. WARNING: Failure to re-install O-Ring after setting Rotational Limit Stop could result in scald injury. e. Reinstall handle adaptor and handle. Be sure to fasten securely Page. 7 on your Maintenance and Installation sheet you will find the same instructions but with a photo to show you how to do this. https://media.deltafaucet.com/MandI/101649%20Rev%20D.pdf Best Regards, Kyra