Stryke®
View Full Stryke® Bathroom Collection

Diverter Tub Spout in Lumicoat® Champagne Bronze

Model#: RP93376CZPR
Add to Favorites
Find local Delta® installers.
Stryke®
View Full Stryke® Bathroom Collection
Diverter Tub Spout in Lumicoat® Champagne Bronze
Model#: RP93376CZPR
List Price: $42800
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
With subtly upturned spout and handles, the Stryke™ Bath Collection radiates confidence and composure with an assured stature and ascending contours. Designed to be integral to both your bathroom’s everyday use and personalized style, Stryke's robust design breathes intrigue into any space in your home. Pair this tub spout with any of the Stryke tub/shower faucets for a complete look in the bath. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
  • Lumicoat® Finishes are guaranteed to resist water spots and mineral buildup and easily wipe clean without chemicals or cleaners on the product’s most commonly touched areas
  • For use with Delta Stryke™ tub/shower faucets
  • Diverts the flow of water from the tub spout to the shower head
  • Sweat onto 1/2 in. C.W.T.
  • Thread onto 1/2 in. IPS
  • Durable metal construction
  • The eloquent warmth of Champagne Bronze™ takes the chill out of contemporary in your bath
  • This vibrant, gold finish provides a vivid splash of contrast to your space for a look that's simultaneously modern and nimble
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
MultiChoice® Universal Valve
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Maintenance & Installation Sheet
Register Product
Installation Information
Overall Height (in.) :
2-29/32
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 8ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Was wondering if there is an extension part to lengthen the spout, I am at least a 1/2 inch short and water drips over side of tub. I need a spout that has a diverter if only this had been a 9 in. Any recommendations?

Asked by: AnnH
Thank you for your review, AnnH! Unfortunately, we do not have a extension kit to make the tub spout longer extend further.
Answered by: DeltaFaucet7
Date published: 2024-03-28

What is the little 'door' on the top of the faucet for?

Asked by: 972w
Hi, 972w! Thank you for your question. The part on top of the Delta RP93376 tub spout assembly is the diverter. Once the diverter is pulled up, the water will divert from the tub spout to the shower head. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What is the length of this spout?

Asked by: Dc19
Hi, Dc19! Thank you for your question. The Delta RP93376 Tub Spout Assembly measures 8 5/16" in length. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

After using the shower head, and turning off the water, the diverter does not return to the tub filler position and has to be pushed back into place. How can I resolve this issue?

Asked by: TCB10
Hi TCB10, Thank you for your question about the Delta Faucet diverter tub spout. Using 50/50 white vinegar and water to soak the area can help remove buildup causing it to stick. If the issue remains, the tub spout may need to be replaced. Unfortunately, we don't carry replacement parts for the tub spout diverter. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-13

When filling the tub the water comes out in a thin horseshoe shaped pattern. It takes a really long time to fill the tub. Water preasure is good. How can i increase flow rate?

Asked by: Fw190
Hello Fw190, Thank you for your question! I am sorry to hear that you are experiencing reduced flow from your Delta Faucet Stryke® Diverter Tub Spout In Champagne Bronze MODEL#: RP93376CZ! We would be happy to help. The most common cause of a low flow rate is debris. The best way to clear any debris is to flush the supply lines. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute. Please make sure that you are getting good flow through both the hot and cold sides while flushing. You can also shake the cartridge back and forth to make sure the back half of the cartridge rattles. This means that the pressure-balancing spool is moving freely, as it should. If it does not work try soaking the cartridge in white vinegar for about 15-30 minutes. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

The diverter works very hard. It is extremely hard to lift. Is there a way to improve this situation without busting the faucet or installation? Reference case #11022730

Asked by: Martha
Hello Martha, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. We recommend wrapping a bag or towel mixed with a 50/50 solution of white vinegar and water around the Delta STRYKE Diverter Tub Spout. Allowing water to evaporate on the surface can lead to the build-up of mineral deposits. This can cause your diverter to be stiff. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

I have a pipe nipple comes out about 4' from the wall. Can I install the Delta RP93376SS threads directly onto a 1/2" pipe?

Asked by: zuizen
Hello, Thank you for your question! Yes, but it will require the use of the included RP12307 tub spout adapter. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-08-14

what is the bath spout and diverter made of?

Asked by: amyg
Hello Amy M.! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! This Delta Faucet RP93376RB Stryke diverter tub spout is made of metal. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28
  • y_2026, m_7, d_27, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_RP93376CZPR, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 94ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.