Is there a recommended min - max height for install of this unit
Thank you for your question, Jb! We do not have a recommended or ideal height for the Delta Traditional Wall Mount Pot Filler 1177LF model. We leave it up to you, our customer/installer, to pick what height is best for you!
Date published: 2017-12-09
If this faucet lead free?
Thank you for your question, TC. Yes, all of our faucets intended to dispense drinking water (kitchen, specialty, and lavatory faucets) have lead free waterways.
Date published: 2017-11-06
Is this pot filler compatible with reverse osmosis-filtered water?
Thank you for your question. Unfortunately, this faucet has not been tested with a reverse osmosis system. The faucet can be used, but low PH water provided by the R/O system may affect the internal o-rings over time.
Date published: 2017-01-19
I have installed this pot filler slightly right of the cook top so it is centered a little better when folded. When folded the top valve (closest to where the water is dispensed) points directly at the back wall when folded if it is in the "closed" position. This means that if I fold the pot filler back and leave it in the closed position the end would hit my wall. Can this be changed so the valve points forward instead of backward? Also, I though it was odd that a clockwise turn caused the water to turn on instead of off, like most faucets. Can this be changed/adjusted?
Thank you for your question, TY. While the direction of the handle rotation cannot be changed, you can change the position of the handle when it is off. To do this, turn off supplies, then remove the cap and screw. Pull off the handle, then reinstall it onto the spines where you would like it in the off position.
Date published: 2017-12-29
pot filler leaks at the center pivot. how do I repair ?
Thank you for your question. I am sorry to hear about your leak. We would recommend a new valve cartridge, RP74972, to fix this leak at the pivot.
Date published: 2017-01-05
Why is this product not available in and not shipped to CA?
I can't buy it here in CA and nobody will ship it here - why?
Hello Phil W,
Thank you for your question. Due to recent California mandates, faucets installed in the kitchen and lavatory are required to have a flow rate of 1.2 GPM or less. Delta model 1177LF-SS has a flow rate of 4.0 GPM.
Date published: 2016-11-21
is it possible to unscrew the nipple the areator is on so it points down when the valve on the wall is installed opposite of what is shown.
the rough in is to tall for the configuration of the faucet. I want ti flip it
Thank you for your question. The faucet must be installed right-side up.
Date published: 2016-06-20