- Single hole installation
- Swivels to extend 24"
- Backed by Delta Faucet's Lifetime Limited Warranty
List Price*:
$677.05
You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
- Single hole installation
- Escutcheon
- ADA Compliant
- Dual handle design for easy operation
Special Features
-
Brilliance® Finish
-
ADA Compliant
Installation Information
singleholewallmountinstallation
- Flow Rate: 4.0 gpm @ 60 psi, 15.1 L/min @ 414 kPa
- Spout Height: 7-7/32"
- Spout Length: 23-5/8"
- Supply Lines: Not Included
- Valve Type: Ceramic valve
Rated 1 out of
5
by
Kylerh from
Multiple wall valve leaks
I would give this zero stars if I could. I had two of the identical pot filler’s in a row fail at the wall valve. Delta confirmed that either valve should be able to completely stop the flow of water, however after several days of very limited use, the wall valve when closed started allowing water through when the end valve was open. The problem then becomes if the end valve fails in a similar way, my stove, floor and basement will all get water damage. Delta sent me replacement valves which worked for a week, then failed. Build.com had amazing customer service and sent me a replacement filler, which started doing the same thing after 2 weeks. Delta only reimbursed labor from one of the service calls, And still are only offering more replacement valves with this second potfiller that’s leaking. I am sick of paying plumbing service calls for this filler so I will be returning it and going with a different brand.
Date published: 2019-08-23
Rated 2 out of
5
by
Jo from
meh
looks nice but the wall valve doesn't seal properly. meaning, when the valve at the wall is closed but the valve one the head is open, it trickles out water. luckily there are two valves to shut off the water, i suppose?
Date published: 2019-07-26
Rated 5 out of
5
by
LarBar89 from
So far so good!
So far this faucet works as advertised and no leaks! Looks great too!
Date published: 2019-06-29
Rated 5 out of
5
by
Zorgo69 from
exelent features
i added this for my wife on her new kitchen and she love it
Date published: 2018-12-12
Rated 5 out of
5
by
JoJo777 from
Functional addition to the kitchen
This faucet is a great addition to our kitchen remodel. It gets used almost daily. The faucet is sturdy and well made.
As do-it-yourselfers, we would have liked more detailed installation instructions. Example, in order to change the handle position; removed the handle from the valve cartridge, reposition the valve and replace the screw and cover. We also used plumber tape and a small of pipe thread sealant. We are very happy with the end results.
Date published: 2018-10-18
Rated 1 out of
5
by
NOLAgirl from
Water won't shut off
We just had our kitchen remodeled and we added this beautiful pot filler. Used it maybe 3 times and now the water won't shut off from the back shut off. So disappointed that this is happening.
Date published: 2018-09-09
Rated 5 out of
5
by
jd22 from
Great customer service
I bought this product for our new home and it looks really nice. However it leaked at the shutoff nearest the wall. I called Delta and the sent me TWO shutoffs without any hassle or question. Very impressed with the customer service. Will be a dedicated Delta customer.
Date published: 2018-06-05
Rated 5 out of
5
by
Danno from
Pot Filler Valve Cartridge
I experienced minor leakage from one of the two valve cartridges in my Delta pot filler. Delta sent a new valve assembly to me in clouding the exterior valve handle. More parts than I expected. Nice though.
Date published: 2018-06-03
I am installing a new kitchen and with a wolf cook top. I am in a Delta DL1177LF-CZ how high above the cook top do recommend installing the 1/2" supply.
Thank you for your inquiry, Jack! Yes, the Delta Traditional Pot Filler 1177LF-CZ is recommended to be connected to a 1/2" IPS supply line that extends 1/2" past the finished wall surface.
Best regards,
Tanya
Date published: 2019-01-10
What sink faucet system best matches the traditioinal wall mount pot filler?
Hi Catherine,
Thank you for your question! Since the Pot Filler is not part of a specific design collection, any of our Traditional style faucets will match some of the design aspects. Please click the link below to browse our selection of kitchen faucets with a Traditional design style.
http://www.deltafaucet.com/kitchen/faucets/filter-results.html?sort=pricehighlow&finish=ss&style=kitchen-traditional
Best regards,
Jon
Date published: 2016-06-28
Valve Orientation
I have installed this pot filler slightly right of the cook top so it is centered a little better when folded. When folded the top valve (closest to where the water is dispensed) points directly at the back wall when folded if it is in the "closed" position. This means that if I fold the pot filler back and leave it in the closed position the end would hit my wall. Can this be changed so the valve points forward instead of backward? Also, I though it was odd that a clockwise turn caused the water to turn on instead of off, like most faucets. Can this be changed/adjusted?
Thank you for your question, TY. While the direction of the handle rotation cannot be changed, you can change the position of the handle when it is off. To do this, turn off supplies, then remove the cap and screw. Pull off the handle, then reinstall it onto the spines where you would like it in the off position.
Best regards,
Jon
Date published: 2017-12-29
The arms on my pot filler are not parallel when in the closed position. The elbows are tight, with no play in them(as they should be). How can this be fixed? I haven’t installed it yet. Thanks
Hi, BobbyR!
Thank you for your question. The 1177LF pot filler should fold and arms should be parallel. The elbows should not be tight and fold smoothly. We do recommend to return back to the store if this one is not working correctly, as it should.
Best Regards,
Rosanna
Date published: 2018-02-23
Pot Filler
What are the sizes of each arm for the Filler?
Thx,
Gary
Thank you for your question. Included here is the spec sheet for Delta Faucet model # 1177LF-RB.
http://www.deltafaucet.com/customersupport/documentation/1177lf-rb.html?document=ts&documentIndex=0#flashWrapper
Date published: 2017-06-09
Does this pot filler fit stylistically with any other faucets in the kitchen collection?
Hi, Jason!
Thank you for your question. The Delta 1177LF pot filler fits our Traditional style faucets. Here is a link to these types of faucet:
https://www.deltafaucet.com/kitchen/sink-faucets?StyleIsTraditional=T&facetFinish=chrome
Best Regards,
Rosanna
Date published: 2019-01-22
Is there a recommended min - max height for install of this unit
Thank you for your question, Jb! We do not have a recommended or ideal height for the Delta Traditional Wall Mount Pot Filler 1177LF model. We leave it up to you, our customer/installer, to pick what height is best for you!
Best regards,
Tanya
Date published: 2017-12-09
What is the total width of this product when it is folded up?
Hi Chris,
Thank you for your question. The faucet body is 14" wide when parallel with the wall. When the handle is turned outward, the total width is 16".
Technical Specifications:
http://www.deltafaucet.com/customersupport/documentation/1177lf-rb.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper
Best regards,
Jon
Date published: 2016-03-15
