Delta®
Traditional Wall Mount Pot Filler in Venetian Bronze
Model#:
1177LF-RB
PRODUCT FEATURES
Filling pots on the stove has never been easier or more affordable, thanks to the new Delta Pot Filler faucet. Very competitively priced, the ADA compliant Pot Filler features a wall-mount, dual swing joint design with dual shut off valves and a 4 gpm flow rate to fill large pots in no time. A pot filler makes it easy to fill large cooking vessels quickly and without the walk from sink to stove.
- Dual shut off on the Delta Pot Filler faucet allows the user to turn the water off at either the wall or the spout, controlling the water flow at the point of use
- 24 in. dual swing joints allow the pot filler to easily fold away when not in use
- Simple on and off with a quarter turn of the handle
- Simple on and off with a quarter turn of the handle
- Meets standards set by Americans with Disabilities Act (ADA)
- Single hole installation
- Assembled dimensions: 8-17/32 in. H x 26-31/32 in. D x 2-3/8 in. W
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Single hole wall mount installation
Connection Type :
1/2" IPS connection
Flow Rate :
4.0 gpm @ 60 psi, 15.1 L/min @ 414 kPa
Overall Height (in.) :
8-17/32
Valve Type:
Ceramic valve
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
BigT59 from
Love the way it swings so freely and perfect for our needs
Date published: 2026-03-30
Rated 5 out of
5
by
Sylvia R from
Pot filler
I. I am enjoying the pot filler. Easy to use. Water pressure is steady.
Date published: 2025-12-01
Rated 5 out of
5
by
Deltapotfillerrepair from
Repair leaking swivel.
Pot filler repair. Leaking at the swivel. Three, #80 rubber O-rings. Use allen key to remove two screws on the wall plate. Turn potfiller counter clock wise to remove from wall. On the bottom of the swivel, there is a decorative plate that can be removed. Once removed, there is an allen bolt. I think it’s 1/4” allen wrench. It’s very tight. I had to use a vice to turn the bolt. Once loosened, you can pop out the stem and there are 3 rubber o-rings. Replace those with #80 size o-ring. Make sure to use pipe tape on the wall plate when installing back.
Date published: 2025-10-05
Rated 5 out of
5
by
Frustrated from
Replacement o-ring size for swing arm in review.
Love my pot filler 1177LF ! Delta however does not offer replacement o-rings when it started leaking but I found what I needed and repaired it. I disassembled my leaky pot filler and measured the o-rings in the arm joints where it was leaking with a micrometer. There are three o-rings per swivel joint. Based on my measurements I ordered Rubber O-Rings size 20mm OD - 14mm ID and 3mm Width from AMZ. You need six but order extra if you damage one during install. The replacement was easy. Turn off the water at the valve closest to the wall. Open the valve at the end to drain any water. Pop off the decretive caps and using a proper size allen (hex) wrench unscrew the connection at the wall valve first. Remove the pot filler. Unscrew the second joint. Remove the old o-ring that is closest to the threads on the brass insert first. Then remove / unscrew the insert completely. You may need to gently push it out with a wooden dowel and rubber mallet. Remove the last two o-rings from each insert. Clean any mineral buildup from ALL parts. I used white vinegar. Dry then lube ALL parts with a small amount food grade silicone grease before and after installing the o-rings to assist with assembly and o-ring wear. Replace just the first two o-rings farthest away from the threads first. Install the inserts back into the pot filler arms. It will be a tight fit. This is where the silicone lube and rubber mallet if needed come in handy. Use a wooden block or socket so you do not damage the brass threads when pushing the inserts through and out the other side. I also slowly twisted the insert with the hex wrench while pushing back in to prevent o-ring damage. Once they are all the way through add the last o-ring. If you try to put all three o-rings on first you will damage the o-ring closest to the threads while pushing the insert back in. Re attach the filler swivel arms pieces first and then the filler back to the wall valve. Tighten securely but do not over tighten. Check for leaks by shutting off the outer valve and turning on the wall valve. Retighten with hex wrench as needed. No leaks? Replace the beauty caps and run the water in a large pot to flush out any excess grease. After replacing the o-rings my pot filler was a bit stiff to move but no longer leaks! :)
Date published: 2025-07-08
Rated 5 out of
5
by
JP Fix It LLC from
My Customer Was Thrilled
My customer was thrilled with the look, feel and performance of this pot filler.
Date published: 2024-07-30
Rated 1 out of
5
by
Danny from
Leaks
We have only had this pot filler for a few years and it leaks from multiple spots.
Date published: 2024-04-14
Rated 5 out of
5
by
Redecor friend from
Gorgeous and functional
Very heavy and works well. Love the dual turn on off to protect from leaks
Date published: 2024-03-17
Rated 1 out of
5
by
TJ 67 from
Leaking
After 2 years, this product started leaking at the middle joint. Was charged $350 by plumber for repairing.
Date published: 2024-02-08
Q&A
Where is this made?
Hi, Jimw!
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance.
The location information on the back of the box will tell you where your specific faucet model was made.
Best Regards, Rosanna
Date published: 2024-03-28
I am installing a new kitchen and with a wolf cook top. I am in a Delta DL1177LF-CZ how high above the cook top do recommend installing the 1/2" supply.
Thank you for your inquiry, Jack! Yes, the Delta Traditional Pot Filler 1177LF-CZ is recommended to be connected to a 1/2" IPS supply line that extends 1/2" past the finished wall surface.
Best regards,
Tanya
Date published: 2024-03-28
My traditional pot filler leaking at the middle joint. Is there a fix?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-02-19
Our pot filler was installed too high. To avoid cutting the solid backsplash, if we install the filler to the wall upside down, then the spout will need to be rotated to face down. Is it possible to rotate the spout 180 degrees.
Hello,
Thank you for your question!
No, we do not recommend this as the spout portion will not swivel to accommodate.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-04-10
Can a water filter such as PUR be attached to this pot filler?
Hello, Cynthia!
Thanks for your question. A water filter can be installed onto this 1177LF Pot Filler faucet as long as it has compatible connections. However, we do not recommend to add a water filter to a Pot Filler faucet as it will greatly decrease the flow of water to fill a pot, etc.
Best Regards,
Rosanna
Date published: 2024-03-28
If I want the filler end to be centered on the range after install, what is the offset required for the installation of the nipple out of the wall?
Hi Dennis,
Thank you for your question. In the fully extended or folded (parallel with the wall) position, the spout end will be centered with the supply nipple.
Best regards,
Jon
Date published: 2024-03-28
Can the pot filler be hooked up to either hot or cold water lines. Does it matter
Hello JasonW,
Thank your for your question! We do not recommend using hot water for the Delta Wall Mount Pot Filler 1177LF, for safety protection reasons. This unit is designed for cold water only connection.
Best regards,
Tanya
Date published: 2024-03-28
If the pot filler is placed in the middle of the stovetop/range, would the heat from the range damage the valve of the pot filler?
Hi Ali, Thank you for your question. As long as the external temperature does not exceed 150 degrees the model 1177LF-SS faucet will not be affected. We recommend folding the pot filler back to the wall and away from the stove top when not in use.
thanks,
Dave
Date published: 2024-03-28
What matching style kitchen faucet would you recommend for this pot filler ?
Thank you for your question, Larry! The Delta Pot Fillers are not designed to match a specific collection but are intended to compliment many different styles. Model 1177LF-CZ most closely resembles the Cassidy Collection.
https://www.deltafaucet.com/kitchen/faucets/with-sprayer?searchFilter=true
Best regards, Edward
Date published: 2024-03-28
Inverted nstall possible?
Is it possible to install "inverted" like this picture? The delta spout would of course be rotated 180 degrees. This would make sure the first arm could clear even the ttallest pot that may be next to the wall while filling a pot on the front side of the stove.
Hi Eric,
Thank you for your question. Both arms can be rotated over 180 degrees, so the spout can be positioned on the right or left. I hope this answers your question!
Best regards,
Jon
Date published: 2024-03-28
What is the measurement from the center of wall nipple to bottom of faucet?
I am setting the plumbing and want the bottom of the faucet to be 14" above the deck. Need to know exactly where to stub out the nipple. Thank you
Hi Rick, Thank you for your question. The distance from the bottom of the faucet to the center of the pipe nipple is 3.12".
Thanks,
Dave
Date published: 2024-03-28
We are getting ready to install a new back splash & cannot figure out how to get the flange cover to slide away from the wall. It spins but will not back up. Thank you.
Thank you for your question, Julie! Model 1177LF-AR will require you to remove a set screw underneath as well as un-thread the faucet. The part you are referring to is a decorative cover that simply snaps in place. Please refer to Page 3, Step E of the Maintenance and Installation manual below for reference.
Best regards, Edward
Date published: 2024-03-28
What is the distance from the stove top to pot filler wall connection
Hi, Mark!
Thank you for your question. There is not a required measurement from the stove top to the Delta 1177LF-PN pot filler. We do leave that decision up to the end user. Here is a link to the technical specifications for measurements for the faucet itself:
https://media.deltafaucet.com/SpecSheet/dsp-k-1177lf-a_F.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
Do you have an extension?
Hello,
Thank you for your question!
Unfortunately we do not offer an extension kit for this pot filler.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-06-30
I have a leak in the arm joint /hinge and would like a replacement part to stop the leak. We have checked all joints and shut offs the only issue is the arm joint. It is a slow leak. It's as if there is water trapped after its shutoff at the wall.
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-05-06
We installed the 1177LF-AR several years ago and is now leaking at the swivel joint. Does it come apart at the swivel in order to fix the leak? Can someone let me know what I can do to fix the leak?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-01-21
I only see pictures of the pot filler mounted on the left. Can we mount it on the right side? Do the arms pivot either direction?
What are the dimensions of each arm? Is the top arm longer?
Hi Mike_Jen, Thank you for your question. The spout on the model 1177LF can swing to either the right or left hand side. The bottom arm center to center is 9.72" long, the top arm center to center is 12.34" long. The top arm is longer.
Thanks,
Dave
Date published: 2024-03-28
What is the difference between the Arctic Stainless and the Stainless finishes?
Which will go better with my stainless appliances?
Hi Kathie, Thank you for your question. The Arctic stainless (AR) has a blue tint to the finish which coordinates with many of todays appliances. The Brilliance stainless (SS) has a gold tint to the finish, it is similar to brushed nickel finishes.
Thanks,
Dave
Date published: 2024-03-28
AB1953 certified?
Is this pot filler ASTM AB1953 certified, and if so, can you please provide the Massachusetts approval code? Thank you.
Hi Erica, Thank you for your question. Attached is the spec sheet for the model 1177LF that covers the lead free legislation compliance and a link to the Massachusets product approval website for this product..
http://www.deltafaucet.com/customersupport/documentation/1177lf-ss.html?document=ts&documentIndex=0#flashWrapper
http://license.reg.state.ma.us/pubLic/pl_products/pb_search.asp?type=P&manufacturer=Delta+Faucet+Company&stype=spec&model=1177lf&product=&description=&psize=50
Thanks,
Dave
Date published: 2024-03-28
Delta Wall Mounted Pot Filler Handle Options?
Does Delta have any different handle options for the Pot Filler? Is it possible to order different handles as an extra? If so, what options are available?
Thank you for your question. Delta Faucet model # 1177LF does not have any other handles available at this time.
Date published: 2024-03-28
Is it OK to hook up this faucet to hot water? What kitchen sink faucets are of the same design/style? Thanks
Hi, Ronald!
Thank you for your question. The Delta 1177LF-SS pot filler faucet is a cold water connection only. This unit fits other Traditional style faucets. Here is a link for these options:
https://www.deltafaucet.com/kitchen/sink-faucets?StyleIsTraditional=T&facetFinish=stainless
Best Regards,
Rosanna
Date published: 2024-03-28
My pot filler is leaking at the middle joint. The cap was pushed out and the o-ring does not allow it to seat in all the way. Looks like I need a replacement cap and o-ring. Thank you for any assistance you can provide.
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-10-31
How high above the counter top should a pot filler be installed at ?
Hi, TomS!
Thank you for your question. There is not a required measurement from the stove top to the Delta 1177LF pot filler. We do leave that decision up to the end user. Here is a link to the technical specifications for measurements for the faucet:
https://media.deltafaucet.com/SpecSheet/dsp-k-1177lf-a_F.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
I am not sure what the part is called but at the 'elbow' of the pot filler it is leaking. What part would that be and is it available?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-05-06
WHAT IS THE ADA MOUNTING HEIGHT ABOVE COOKING SURFACE?
Hello HTEEL,
Thank you for your question! I am happy to help you!
Our Delta Faucet Pot Filler 1177LF has no specific install height, this is based off the kitchen design and customer preference. I have included a link below to show the measurements of the unit to assist in pot filler placement.
https://media.deltafaucet.com/SpecSheet/DSP-K-1177LF%20Rev%20G.pdf
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Same question as others, the pivot joint is leaking. Can I get replacement o-rings? why aren't they shown on the parts diagram?
Hello Bob!
Thank you for your question and we are happy to help. Unfortunately, there are not replacement o-rings. We recommend replacing the cartridges. With any further questions or concerns, please do not hesitate to contact us directly.
Best Regards,
Carrie
Date published: 2025-01-21
Does this have a kitchen sink matching faucet?
Hello, Shemom!
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet DELTA® Traditional Wall Mount Pot Filler In Chrome MODEL#: 1177LF is not designed to match a specific collection but is intended to match many different styles. Our model 1177LF-CZ fits closely to the Cassidy Collection. Here is the link to our faucets.
https://www.deltafaucet.com/kitchen/faucets/sink-faucets
Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else.
Best Regards,
Themar
Date published: 2024-03-28
Is there a 12" extension available for this filler? We get a lot of splatter when filling a pot directly. If so... Where could we purchase one? Thanks & enjoy the day! Paul
Hi Paul,
Thanks so much for contacting Delta Faucet Company about 1177LF-RB! We do not manufacture an extension kit for the wall mount pot filler, I am sorry for the inconvenience you are experiencing. Due to the splashing, we would recommend removing the aerator and cleaning it with a 50/50 solution of white vinegar and water.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-01-31
Hi, I have a wall mouhnt pot filler 1177lf-rb in my home. we notice the wall side valve cannot turn off the water any more. and there is also some water sinking from the junction area between the 2 swing spouts. Would you please give me advice how to fix?
Hello!
Thank you for contacting Delta Faucet Company!
We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2025-12-06
My pot filler #1177LF-RB is leaking above the main handle attached to the wall and at the swivel joint. Is there a cartridge for these parts of the faucet? I have replaced the cartridge at the end in the past.
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-04-05
PART LIST
PART LIST
View Product
![Image-RP61824]()
Addison®
Addison® Cartridge Fluehs - Cold
List Price:
$87.35
Online Price:
$69.88
Free Ground Shipping All Orders $49+
RP61824
5.00
3
View Product
![Image-Master-RP74972]()
Delta®
Delta® Metal Lever Handle w/ Cartridge - Pot Filler
List Price:
$98.40
-
$133.20
Free Ground Shipping All Orders $49+
RP74972
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.