Delta®
Traditional Wall Mount Pot Filler in Stainless
Model#:
1177LF-SS
PRODUCT FEATURES
Filling pots on the stove has never been easier or more affordable, thanks to the new Delta Pot Filler faucet. Very competitively priced, the ADA compliant Pot Filler features a wall-mount, dual swing joint design with dual shut off valves and a 4 gpm flow rate to fill large pots in no time. A pot filler makes it easy to fill large cooking vessels quickly and without the walk from sink to stove.
- Dual shut off on the Delta Pot Filler faucet allows the user to turn the water off at either the wall or the spout, controlling the water flow at the point of use
- 24 in. dual swing joints allow the pot filler to easily fold away when not in use
- Simple on and off with a quarter turn of the handle
- Simple on and off with a quarter turn of the handle
- Meets standards set by Americans with Disabilities Act (ADA)
- Single hole installation
- Assembled dimensions: 8-17/32 in. H x 26-31/32 in. D x 2-3/8 in. W
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Single hole wall mount installation
Connection Type :
1/2" IPS connection
Flow Rate :
4.0 gpm @ 60 psi, 15.1 L/min @ 414 kPa
Overall Height (in.) :
8-17/32
Valve Type:
Ceramic valve
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
BigT59 from
Love the way it swings so freely and perfect for our needs
Date published: 2026-03-30
Rated 5 out of
5
by
Sylvia R from
Pot filler
I. I am enjoying the pot filler. Easy to use. Water pressure is steady.
Date published: 2025-12-01
Rated 5 out of
5
by
Deltapotfillerrepair from
Repair leaking swivel.
Pot filler repair. Leaking at the swivel. Three, #80 rubber O-rings. Use allen key to remove two screws on the wall plate. Turn potfiller counter clock wise to remove from wall. On the bottom of the swivel, there is a decorative plate that can be removed. Once removed, there is an allen bolt. I think it’s 1/4” allen wrench. It’s very tight. I had to use a vice to turn the bolt. Once loosened, you can pop out the stem and there are 3 rubber o-rings. Replace those with #80 size o-ring. Make sure to use pipe tape on the wall plate when installing back.
Date published: 2025-10-05
Rated 5 out of
5
by
Frustrated from
Replacement o-ring size for swing arm in review.
Love my pot filler 1177LF ! Delta however does not offer replacement o-rings when it started leaking but I found what I needed and repaired it. I disassembled my leaky pot filler and measured the o-rings in the arm joints where it was leaking with a micrometer. There are three o-rings per swivel joint. Based on my measurements I ordered Rubber O-Rings size 20mm OD - 14mm ID and 3mm Width from AMZ. You need six but order extra if you damage one during install. The replacement was easy. Turn off the water at the valve closest to the wall. Open the valve at the end to drain any water. Pop off the decretive caps and using a proper size allen (hex) wrench unscrew the connection at the wall valve first. Remove the pot filler. Unscrew the second joint. Remove the old o-ring that is closest to the threads on the brass insert first. Then remove / unscrew the insert completely. You may need to gently push it out with a wooden dowel and rubber mallet. Remove the last two o-rings from each insert. Clean any mineral buildup from ALL parts. I used white vinegar. Dry then lube ALL parts with a small amount food grade silicone grease before and after installing the o-rings to assist with assembly and o-ring wear. Replace just the first two o-rings farthest away from the threads first. Install the inserts back into the pot filler arms. It will be a tight fit. This is where the silicone lube and rubber mallet if needed come in handy. Use a wooden block or socket so you do not damage the brass threads when pushing the inserts through and out the other side. I also slowly twisted the insert with the hex wrench while pushing back in to prevent o-ring damage. Once they are all the way through add the last o-ring. If you try to put all three o-rings on first you will damage the o-ring closest to the threads while pushing the insert back in. Re attach the filler swivel arms pieces first and then the filler back to the wall valve. Tighten securely but do not over tighten. Check for leaks by shutting off the outer valve and turning on the wall valve. Retighten with hex wrench as needed. No leaks? Replace the beauty caps and run the water in a large pot to flush out any excess grease. After replacing the o-rings my pot filler was a bit stiff to move but no longer leaks! :)
Date published: 2025-07-08
Rated 5 out of
5
by
JP Fix It LLC from
My Customer Was Thrilled
My customer was thrilled with the look, feel and performance of this pot filler.
Date published: 2024-07-30
Rated 1 out of
5
by
Danny from
Leaks
We have only had this pot filler for a few years and it leaks from multiple spots.
Date published: 2024-04-14
Rated 5 out of
5
by
Redecor friend from
Gorgeous and functional
Very heavy and works well. Love the dual turn on off to protect from leaks
Date published: 2024-03-17
Rated 1 out of
5
by
TJ 67 from
Leaking
After 2 years, this product started leaking at the middle joint. Was charged $350 by plumber for repairing.
Date published: 2024-02-08
Q&A
at what height should i leave the 1/2 pipe sticking out of the wall
delta 1177LF-SS pot filler
Hi Bob, Thank you for your question. We do not have a recommended height at which to install the 1177LF-SS pot filler. Appliance height, cabinet height, and other variables affect the placement of the faucet.
Thanks,
Dave
Date published: 2024-03-28
Where is this made?
Hi, Jimw!
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance.
The location information on the back of the box will tell you where your specific faucet model was made.
Best Regards, Rosanna
Date published: 2024-03-28
Can a water filter such as PUR be attached to this pot filler?
Hello, Cynthia!
Thanks for your question. A water filter can be installed onto this 1177LF Pot Filler faucet as long as it has compatible connections. However, we do not recommend to add a water filter to a Pot Filler faucet as it will greatly decrease the flow of water to fill a pot, etc.
Best Regards,
Rosanna
Date published: 2024-03-28
If the pot filler is placed in the middle of the stovetop/range, would the heat from the range damage the valve of the pot filler?
Hi Ali, Thank you for your question. As long as the external temperature does not exceed 150 degrees the model 1177LF-SS faucet will not be affected. We recommend folding the pot filler back to the wall and away from the stove top when not in use.
thanks,
Dave
Date published: 2024-03-28
Inverted nstall possible?
Is it possible to install "inverted" like this picture? The delta spout would of course be rotated 180 degrees. This would make sure the first arm could clear even the ttallest pot that may be next to the wall while filling a pot on the front side of the stove.
Hi Eric,
Thank you for your question. Both arms can be rotated over 180 degrees, so the spout can be positioned on the right or left. I hope this answers your question!
Best regards,
Jon
Date published: 2024-03-28
I only see pictures of the pot filler mounted on the left. Can we mount it on the right side? Do the arms pivot either direction?
What are the dimensions of each arm? Is the top arm longer?
Hi Mike_Jen, Thank you for your question. The spout on the model 1177LF can swing to either the right or left hand side. The bottom arm center to center is 9.72" long, the top arm center to center is 12.34" long. The top arm is longer.
Thanks,
Dave
Date published: 2024-03-28
Is it OK to hook up this faucet to hot water? What kitchen sink faucets are of the same design/style? Thanks
Hi, Ronald!
Thank you for your question. The Delta 1177LF-SS pot filler faucet is a cold water connection only. This unit fits other Traditional style faucets. Here is a link for these options:
https://www.deltafaucet.com/kitchen/sink-faucets?StyleIsTraditional=T&facetFinish=stainless
Best Regards,
Rosanna
Date published: 2024-03-28
How many Inches to the Left or Right of the center would the water supply have to be to have the pot fill centered Left to Right when folded against the wall?There is not enough information on the Spec sheet for this to be figured.
Hi, Sunshine!
Thank you for your question. The longest fold for left and right of the Delta 1177LF-RB Pot Filler measures 11 3/8" (289 mm). We recommend measuring the center on your wall for the best reach and fold application.
Best Regards, Rosanna
Date published: 2024-03-28
Valve Orientation
I have installed this pot filler slightly right of the cook top so it is centered a little better when folded. When folded the top valve (closest to where the water is dispensed) points directly at the back wall when folded if it is in the "closed" position. This means that if I fold the pot filler back and leave it in the closed position the end would hit my wall. Can this be changed so the valve points forward instead of backward? Also, I though it was odd that a clockwise turn caused the water to turn on instead of off, like most faucets. Can this be changed/adjusted?
Thank you for your question, TY. While the direction of the handle rotation cannot be changed, you can change the position of the handle when it is off. To do this, turn off supplies, then remove the cap and screw. Pull off the handle, then reinstall it onto the spines where you would like it in the off position.
Best regards,
Jon
Date published: 2017-12-29
The arms on my pot filler are not parallel when in the closed position. The elbows are tight, with no play in them(as they should be). How can this be fixed? I haven’t installed it yet. Thanks
Hi, BobbyR!
Thank you for your question. The 1177LF pot filler should fold and arms should be parallel. The elbows should not be tight and fold smoothly. We do recommend to return back to the store if this one is not working correctly, as it should.
Best Regards,
Rosanna
Date published: 2024-03-28
Pot Filler
What are the sizes of each arm for the Filler?
Thx,
Gary
Thank you for your question. Included here is the spec sheet for Delta Faucet model # 1177LF-RB.
http://www.deltafaucet.com/customersupport/documentation/1177lf-rb.html?document=ts&documentIndex=0#flashWrapper
Date published: 2024-03-28
Does this pot filler fit stylistically with any other faucets in the kitchen collection?
Hi, Jason!
Thank you for your question. The Delta 1177LF pot filler fits our Traditional style faucets. Here is a link to these types of faucet:
https://www.deltafaucet.com/kitchen/sink-faucets?StyleIsTraditional=T&facetFinish=chrome
Best Regards,
Rosanna
Date published: 2024-03-28
Hello, I have a (1177LF-CZ) Wall Mount Pot Filler in Champaign Bronze that has rust on the inside. It’s not installed yet so we can see into it and it’s very obviously coated in rust up past the threads. Is this normal? Should we install it?
Hello,
I apologize for the issue you are experiencing and I am happy to help you.
We do not recommend and installing it and it should be returned to where purchased for an exchange or refund.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-06-24
Is there a recommended min - max height for install of this unit
Thank you for your question, Jb! We do not have a recommended or ideal height for the Delta Traditional Wall Mount Pot Filler 1177LF model. We leave it up to you, our customer/installer, to pick what height is best for you!
Best regards,
Tanya
Date published: 2024-03-28
Hello. My Delta 1177LF pot filler has developed a leak in the arm joint. Can you provide me with replacement parts? I think the O-Rings need to be replaced.
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-01-26
What is the total width of this product when it is folded up?
Hi Chris,
Thank you for your question. The faucet body is 14" wide when parallel with the wall. When the handle is turned outward, the total width is 16".
Technical Specifications:
http://www.deltafaucet.com/customersupport/documentation/1177lf-rb.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper
Best regards,
Jon
Date published: 2024-03-28
What is the closest match to Brushed nickel ?
Thank you for your question, Chris! The Stainless Steel finish is a very close match to brushed nickel.
Best regards, Jon
Date published: 2024-03-28
When mounting this pot filler over the stove do you mount it centre or off centre in order for it to look centered when it sits against the wall?
Hi, tara!
Thank you for your question. There is no required place that we advise. We do leave it up to the consumer to determine where they would like to install the pot filler on their wall.
Best Regards,
Rosanna
Date published: 2024-03-28
Hello I'm looking for a replacement ORing for the arm of my Model 1177LF. Where can I get this part. My Pot Filler is leaking.
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-06-16
Is the pot fillers, specifically the bronze, available with the smart voice I Q ?
Hi, Tracey!
Thank you for your question. At this time, our Delta Pot Fillers are not compatible with our VoiceIQ Technology.
Best Regards,
Rosanna
Date published: 2024-03-28
Upside down
Is it possible to install this upside down? I want the supply pipe at the top and the spigot on the bottom.
Hi Tom,
Thank you for your question! Unfortunately, this faucet cannot be installed upside down.
Best regards,
Jon
Date published: 2024-03-28
Is there a kitchen sink faucet that matches the pot filler faucet?
Hi Taxime03,
Thank you for your question. The Delta Pot Filller 1177LF-AR does not have a specific matching collection style. Any of the Delta kitchen faucets in the Arctic Stainless (AR) finish could be installed with this pot filler.
https://www.deltafaucet.com/kitchen/sink-faucets
Best regards,
Tanya
Date published: 2024-03-28
Does artic stainless or stainless match best with Wolf Professional appliances with a brushed stainless finish?
Hello, Rosanne,
Thank you for your question. Yes, either our Arctic Stainless or Brilliance Stainless Steel finishes should be the closest matching finishes we manufacture to a Wolf Professional Appliance Brushed Stainless finish.
Best regards,
Tanya
Date published: 2024-03-28
Is this pot filler lead free
Hello Lovingmy3E's,
Thank you for your inquiry! The Delta Traditional Wall Mount Pot Filler 1177LF and all of our faucets intended to dispense drinking water (kitchen, specialty, and lavatory faucets) have lead free waterways.
Best regards,
Tanya
Date published: 2024-03-28
My pot filler, Model#: 1177LF-RB, has developed a drip at the swivel arm joint. Are their a instructions on repairing a leak at this location?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-02-12
My pot filler, Model#: 1177LF-RB, has developed a drip at the swivel arm joint. Are their a instructions on repairing a leak at this location?
Since Delta is not offering replacement o-rings I disassembled my leaky pot filler and measured the o-rings in the arm joints where it was leaking with a micrometer. There are three o-rings per swivel joint. Based on my measurements I ordered Nitrile Rubber O-Rings size 20mm OD - 14mm ID and 3mm Width from AMZ. You need six but order extra if you damage one during install. The replacement was easy. Turn off the water at the valve closest to the wall. Open the valve at the end to drain any water. Pop off the decretive caps and using a proper size allen (hex) wrench unscrew the connection at the wall valve first. Remove the pot filler. Unscrew the second joint. Remove the old o-ring that is closest to the threads on the brass insert first. Then remove / unscrew the insert completely. You may need to gently push it out with a wooden dowel and rubber mallet. Remove the last two o-rings from each insert. Clean any mineral buildup from ALL parts. I used white vinegar. Dry then lube ALL parts with a small amount food grade silicone grease before and after installing the o-rings to assist with assembly and o-ring wear. Replace just the first two o-rings farthest away from the threads first. Install the inserts back into the pot filler arms. It will be a tight fit. This is where the silicone lube and rubber mallet id needed come in handy. Use a wooden block or socket so you do not damage the brass threads when pushing the inserts through and out the other side. I also slowly twisted the insert with the hex wrench while pushing back in to prevent o-ring damage. Once they are all the way through add the last o-ring. If you try to put all three o-rings on first you will damage the o-ring closest to the threads while pushing the insert back in. Re attach the filler swivel arms pieces first and then the filler back to the wall valve. Tighten securely but do not over tighten. Check for leaks by shutting off the outer valve and turning on the wall valve. Retighten with hex wrench as needed. No leaks? Replace the beauty caps and run the water in a large pot to flush out any excess grease. After replacing the o-rings my pot filler was a bit stiff to move but no longer leaks! :)
Date published: 2025-11-22
I'm looking for the original 1177LF arm joint O-ring. There is a water leak from the joint arms. I removed the arm and found that it uses a 5/8" ID rubber O-ring. I bought some from a store and installed them, but it still leaks. I need the original parts
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-01-10
Can I use reverse osmosis water with this faucet?
Hi, Cj123!
Thank you for your question. We do not recommend using our Pot Fillers with reverse osmosis systems. At this time, only our Beverage Faucets can be used with reverse osmosis.
https://www.deltafaucet.com/kitchen/specialty-faucets/beverage
Best Regards, Rosanna
Date published: 2024-03-28
Has this pot filler been tested to see if it is compatible with reverse osmosis?
Hello, Heidi. Thank you for your question. We do not recommend using our Pot Fillers with reverse osmosis systems. At this time, only our Beverage Faucets can be used with reverse osmosis.
https://www.deltafaucet.com/kitchen/specialty-faucets/beverage
Best regards, Jon
Date published: 2024-03-28
Lead free?
If this faucet lead free?
Thank you for your question, TC. Yes, all of our faucets intended to dispense drinking water (kitchen, specialty, and lavatory faucets) have lead free waterways.
Best regards,
Jon
Date published: 2024-03-28
PART LIST
PART LIST
View Product
![Image-RP61824]()
Addison®
Addison® Cartridge Fluehs - Cold
List Price:
$87.35
Online Price:
$69.88
Free Ground Shipping All Orders $49+
RP61824
5.00
3
View Product
![Image-Master-RP74972]()
Delta®
Delta® Metal Lever Handle w/ Cartridge - Pot Filler
List Price:
$98.40
-
$133.20
Free Ground Shipping All Orders $49+
RP74972
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.